ZED X, SeeedStudio j4012 Orin NX 16GB, capture card DUO, JP6 not working

[Vivio]

The tutorial is

User_Guide_GMSL_Compatibility_Seeed.pdf

I’ve ask questions about it here:

ZED X - capture card connection to SEED J4012 ( Orin NX 16GB)

Hi there, Finally I’ve bought an ZED X with capture card. I want to pair it to SEEED reComputer J4012-Edge NVIDIA Jetson Orin™ NX 16GB module. J4012 has a carrier board called J401. Based on this documentation I’ve connected the capture card to the J401. [image] The docs regarding capture card and J401 are a little bit unclear if the capture card MUST be powered up with 12-19V or it gets power though the CSI port as stated in the specification of the Stereolabs capture card Connects to…

I’m pretty confident that the tutorial was also on stereolabs at the beginning of the year