[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.148-tegra (buildbrain@mobile-u64-6354-d6000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Thu Sep 18 15:08:33 PDT 2025 () [ 0.000000] Machine model: NVIDIA Jetson AGX Orin 64GB [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x102801f198 TPMFinalLog=0x1018be0000 SMBIOS=0xffff0000 SMBIOS 3.0=0x1027a10000 MEMATTR=0x1021a0e018 ESRT=0x1021a0ff98 TPMEventLog=0x1018bf8018 RNG=0x1015160018 MEMRESERVE=0x1018bfac18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] esrt: Reserving ESRT space from 0x0000001021a0ff98 to 0x0000001021a0ffd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000ff4000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000001033ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1022c41800-0x1022c43fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000001033ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000001018a67fff] [ 0.000000] node 0: [mem 0x0000001018a68000-0x0000001018beffff] [ 0.000000] node 0: [mem 0x0000001018bf0000-0x0000001018bfafff] [ 0.000000] node 0: [mem 0x0000001018bfb000-0x0000001018bfbfff] [ 0.000000] node 0: [mem 0x0000001018bfc000-0x00000010260dffff] [ 0.000000] node 0: [mem 0x00000010260e0000-0x000000102801ffff] [ 0.000000] node 0: [mem 0x0000001028020000-0x000000102c5fffff] [ 0.000000] node 0: [mem 0x000000102c600000-0x000000102c7fffff] [ 0.000000] node 0: [mem 0x000000102c800000-0x000000102cd6ffff] [ 0.000000] node 0: [mem 0x000000102d700000-0x000000102d7fffff] [ 0.000000] node 0: [mem 0x0000001032000000-0x0000001033ffffff] [ 0.000000] mminit::pageflags_layout_widths Section 0 Node 4 Zone 2 Lastcpupid 16 Kasantag 0 Flags 24 [ 0.000000] mminit::pageflags_layout_shifts Section 21 Node 4 Zone 2 Lastcpupid 16 Kasantag 0 [ 0.000000] mminit::pageflags_layout_pgshifts Section 0 Node 60 Zone 58 Lastcpupid 42 Kasantag 0 [ 0.000000] mminit::pageflags_layout_nodezoneid Node/Zone ID: 64 -> 58 [ 0.000000] mminit::pageflags_layout_usage location: 64 -> 42 layout 42 -> 24 unused 24 -> 0 page-flags [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000001033ffffff] [ 0.000000] mminit::memmap_init Initialising map node 0 zone 0 pfns 524288 -> 1048576 [ 0.000000] mminit::memmap_init Initialising map node 0 zone 2 pfns 1048576 -> 16990208 [ 0.000000] On node 0, zone Normal: 2448 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 18432 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80408 r8192 d30184 u118784 [ 0.000000] pcpu-alloc: s80408 r8192 d30184 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernel code [ 0.000000] mminit::zonelist general 0:DMA = 0:DMA [ 0.000000] mminit::zonelist general 0:Normal = 0:Normal 0:DMA [ 0.000000] mminit::zonelist thisnode 0:DMA = 0:DMA [ 0.000000] mminit::zonelist thisnode 0:Normal = 0:Normal 0:DMA [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16187760 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 nospectre_bhb video=efifb:off console=tty0 pcie_aspm=off bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000 [ 0.000000] PCIe ASPM is disabled [ 0.000000] Unknown kernel command line parameters "bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [ 0.000000] Memory: 63800412K/65780160K available (20160K kernel code, 4064K rwdata, 10056K rodata, 7680K init, 529K bss, 1455460K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000730] Console: colour dummy device 80x25 [ 0.000754] printk: console [tty0] enabled [ 0.000902] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000920] pid_max: default: 32768 minimum: 301 [ 0.000998] LSM: Security Framework initializing [ 0.001055] Yama: becoming mindful. [ 0.001096] SELinux: Initializing. [ 0.001506] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.001805] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.006234] rcu: Hierarchical SRCU implementation. [ 0.013186] Tegra Revision: A01 SKU: 208 CPU Process: 0 SoC Process: 0 [ 0.013771] Remapping and enabling EFI services. [ 0.015263] smp: Bringing up secondary CPUs ... [ 0.016257] Detected PIPT I-cache on CPU1 [ 0.016374] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.016476] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.017301] Detected PIPT I-cache on CPU2 [ 0.017313] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.017336] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.018002] Detected PIPT I-cache on CPU3 [ 0.018016] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.018034] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.020762] Detected PIPT I-cache on CPU4 [ 0.020789] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.020821] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.021552] Detected PIPT I-cache on CPU5 [ 0.021563] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.021582] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.022284] Detected PIPT I-cache on CPU6 [ 0.022296] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.022316] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.022983] Detected PIPT I-cache on CPU7 [ 0.022998] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.023021] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.025741] Detected PIPT I-cache on CPU8 [ 0.025769] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.025801] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.026521] Detected PIPT I-cache on CPU9 [ 0.026538] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.026560] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.027264] Detected PIPT I-cache on CPU10 [ 0.027284] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.027306] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.028024] Detected PIPT I-cache on CPU11 [ 0.028039] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.028060] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.028131] smp: Brought up 1 node, 12 CPUs [ 0.028141] SMP: Total of 12 processors activated. [ 0.028148] CPU features: detected: 32-bit EL0 Support [ 0.028150] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.028155] CPU features: detected: Common not Private translations [ 0.028155] CPU features: detected: CRC32 instructions [ 0.028156] CPU features: detected: Data cache clean to Point of Persistence [ 0.028158] CPU features: detected: Generic authentication (architected algorithm) [ 0.028160] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.028162] CPU features: detected: LSE atomic instructions [ 0.028164] CPU features: detected: Privileged Access Never [ 0.028165] CPU features: detected: RAS Extension Support [ 0.028171] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.056472] spectre-bhb mitigation disabled by command line option [ 0.056472] spectre-bhb mitigation disabled by command line option [ 0.084087] CPU: All CPU(s) started at EL2 [ 0.092688] devtmpfs: initialized [ 0.128125] KASLR enabled [ 0.128320] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.128348] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.137865] pinctrl core: initialized pinctrl subsystem [ 0.138939] SMBIOS 3.6.0 present. [ 0.138953] DMI: NVIDIA NVIDIA Jetson AGX Orin 64GB/Jetson, BIOS 36.4.4-gcid-41062509 06/16/2025 [ 0.139562] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.142141] DMA: preallocated 8192 KiB GFP_KERNEL pool for atomic allocations [ 0.142822] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.143491] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.143561] audit: initializing netlink subsys (disabled) [ 0.143712] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1 [ 0.146224] thermal_sys: Registered thermal governor 'step_wise' [ 0.146228] thermal_sys: Registered thermal governor 'user_space' [ 0.146229] thermal_sys: Registered thermal governor 'power_allocator' [ 0.153271] cpuidle: using governor menu [ 0.153494] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.153655] ASID allocator initialised with 32768 entries [ 0.156440] Serial: AMBA PL011 UART driver [ 0.180972] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 118, base_baud = 0) is a SBSA [ 0.181020] printk: console [ttyAMA0] enabled [ 0.193641] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.205748] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.205756] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.205759] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.205760] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.206922] cryptd: max_cpu_qlen set to 1000 [ 0.209154] ACPI: Interpreter disabled. [ 0.211132] iommu: Default domain type: Translated [ 0.211137] iommu: DMA domain TLB invalidation policy: strict mode [ 0.211486] SCSI subsystem initialized [ 0.211584] libata version 3.00 loaded. [ 0.211667] vgaarb: loaded [ 0.211852] usbcore: registered new interface driver usbfs [ 0.211881] usbcore: registered new interface driver hub [ 0.211901] usbcore: registered new device driver usb [ 0.212334] pps_core: LinuxPPS API ver. 1 registered [ 0.212340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.212353] PTP clock support registered [ 0.212436] EDAC MC: Ver: 3.0.0 [ 0.214177] Registered efivars operations [ 0.214758] FPGA manager framework [ 0.214849] Advanced Linux Sound Architecture Driver Initialized. [ 0.215537] Bluetooth: Core ver 2.22 [ 0.215572] NET: Registered PF_BLUETOOTH protocol family [ 0.215577] Bluetooth: HCI device and connection manager initialized [ 0.215591] Bluetooth: HCI socket layer initialized [ 0.215599] Bluetooth: L2CAP socket layer initialized [ 0.215618] Bluetooth: SCO socket layer initialized [ 0.216084] clocksource: Switched to clocksource arch_sys_counter [ 0.253349] VFS: Disk quotas dquot_6.6.0 [ 0.253419] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.253643] pnp: PnP ACPI: disabled [ 0.256901] NET: Registered PF_INET protocol family [ 0.257608] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.259865] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.260591] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.260648] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.261059] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.262371] TCP: Hash tables configured (established 524288 bind 65536) [ 0.262617] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.262737] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.263088] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.263591] RPC: Registered named UNIX socket transport module. [ 0.263594] RPC: Registered udp transport module. [ 0.263595] RPC: Registered tcp transport module. [ 0.263595] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.263620] PCI: CLS 0 bytes, default 64 [ 0.263914] Unpacking initramfs... [ 0.277136] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.277483] kvm [1]: IPA Size Limit: 48 bits [ 0.277527] kvm [1]: GICv3: no GICV resource entry [ 0.277535] kvm [1]: disabling GICv2 emulation [ 0.277552] kvm [1]: GIC system register CPU interface enabled [ 0.277676] kvm [1]: vgic interrupt IRQ9 [ 0.277878] kvm [1]: VHE mode initialized successfully [ 0.281242] Initialise system trusted keyrings [ 0.281289] Key type blacklist registered [ 0.281401] workingset: timestamp_bits=42 max_order=24 bucket_order=0 [ 0.285178] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.285631] NFS: Registering the id_resolver key type [ 0.285655] Key type id_resolver registered [ 0.285660] Key type id_legacy registered [ 0.285719] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.285739] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.285764] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.285990] 9p: Installing v9fs 9p2000 file system support [ 0.286705] integrity: Platform Keyring initialized [ 0.297004] Key type asymmetric registered [ 0.297008] Asymmetric key parser 'x509' registered [ 0.297083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.297091] io scheduler mq-deadline registered [ 0.297099] io scheduler kyber registered [ 0.309265] EINJ: ACPI disabled. [ 0.323398] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.325404] SuperH (H)SCI(F) driver initialized [ 0.325758] msm_serial: driver initialized [ 0.326549] printk: console [ttyTCU0] enabled [ 0.327463] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.327470] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.327477] arm-smmu 8000000.iommu: stage 1 translation [ 0.327479] arm-smmu 8000000.iommu: stage 2 translation [ 0.327482] arm-smmu 8000000.iommu: nested translation [ 0.327488] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.327493] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.327509] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.327513] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.327515] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.328503] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.328506] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.328509] arm-smmu 10000000.iommu: stage 1 translation [ 0.328510] arm-smmu 10000000.iommu: stage 2 translation [ 0.328510] arm-smmu 10000000.iommu: nested translation [ 0.328513] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.328515] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.328520] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.328521] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.328522] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.328865] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.328867] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.328870] arm-smmu 12000000.iommu: stage 1 translation [ 0.328871] arm-smmu 12000000.iommu: stage 2 translation [ 0.328872] arm-smmu 12000000.iommu: nested translation [ 0.328875] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.328877] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.328882] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.328885] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.328886] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.340229] loop: module loaded [ 0.341225] megasas: 07.717.02.00-rc1 [ 0.345212] tun: Universal TUN/TAP device driver, 1.6 [ 0.345764] thunder_xcv, ver 1.0 [ 0.345792] thunder_bgx, ver 1.0 [ 0.345827] nicpf, ver 1.0 [ 0.346702] hclge is initializing [ 0.346727] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.346735] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.346773] e1000: Intel(R) PRO/1000 Network Driver [ 0.346780] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.346814] e1000e: Intel(R) PRO/1000 Network Driver [ 0.346819] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.346841] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.346847] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.346861] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.346866] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.347075] sky2: driver version 1.30 [ 0.347724] VFIO - User Level meta-driver version: 0.3 [ 0.349260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.349270] ehci-pci: EHCI PCI platform driver [ 0.349296] ehci-platform: EHCI generic platform driver [ 0.349370] ehci-orion: EHCI orion driver [ 0.349434] ehci-exynos: EHCI Exynos driver [ 0.349493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.349514] ohci-pci: OHCI PCI platform driver [ 0.349543] ohci-platform: OHCI generic platform driver [ 0.349628] ohci-exynos: OHCI Exynos driver [ 0.350058] usbcore: registered new interface driver usb-storage [ 0.351941] i2c_dev: i2c /dev entries driver [ 0.353355] pps pps0: new PPS source ktimer [ 0.353365] pps pps0: ktimer PPS source registered [ 0.353375] pps_ldisc: PPS line discipline registered [ 0.355599] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.357534] sdhci: Secure Digital Host Controller Interface driver [ 0.357539] sdhci: Copyright(c) Pierre Ossman [ 0.358022] Synopsys Designware Multimedia Card Interface Driver [ 0.358657] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.359987] ledtrig-cpu: registered to indicate activity on CPUs [ 0.361080] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.361614] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.363124] tegra-bpmp bpmp: firmware: 39f77b2baaf3f0522607-da583751bbf [ 0.514671] Freeing initrd memory: 15520K [ 3.844403] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 3.844426] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 3.844429] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 3.844658] hid: raw HID events driver (C) Jiri Kosina [ 3.845003] usbcore: registered new interface driver usbhid [ 3.845010] usbhid: USB HID core driver [ 3.850415] optee: probing for conduit method. [ 3.850469] optee: revision 4.2 (d78bc5fa) [ 3.910766] optee: dynamic shared memory is enabled [ 3.911048] optee: initialized driver [ 3.915049] usbcore: registered new interface driver snd-usb-audio [ 3.916793] NET: Registered PF_PACKET protocol family [ 3.917941] Bluetooth: RFCOMM TTY layer initialized [ 3.917975] Bluetooth: RFCOMM socket layer initialized [ 3.918004] Bluetooth: RFCOMM ver 1.11 [ 3.918300] 9pnet: Installing 9P2000 support [ 3.918424] Key type dns_resolver registered [ 3.920444] printk: console [tty0]: printing thread started [ 3.921577] printk: console [ttyTCU0]: printing thread started [ 3.923159] printk: console [ttyAMA0]: printing thread started [ 3.923360] Loading compiled-in X.509 certificates [ 3.926938] Loaded X.509 cert 'Build time autogenerated kernel key: 9709b2c1b7afae80ccbf49cf4e8a5d004d951f84' [ 4.001509] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 4.004134] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 4.006832] serial-tegra 3100000.serial: RX in PIO mode [ 4.006837] serial-tegra 3100000.serial: TX in PIO mode [ 4.006961] 3100000.serial: ttyTHS1 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 4.008683] serial-tegra 3110000.serial: RX in PIO mode [ 4.008688] serial-tegra 3110000.serial: TX in PIO mode [ 4.008782] 3110000.serial: ttyTHS2 at MMIO 0x3110000 (irq = 213, base_baud = 0) is a TEGRA_UART [ 4.011888] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.011897] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.012325] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 4.018115] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 4.022088] pca953x 2-0023: supply vcc not found, using dummy regulator [ 4.022261] pca953x 2-0023: using no AI [ 4.023360] gpio-308 (tca9554_23_input): hogged as input [ 4.023472] gpio-309 (tca9554_23_input): hogged as input [ 4.023582] gpio-310 (tca9554_23_input): hogged as input [ 4.023689] gpio-311 (tca9554_23_input): hogged as input [ 4.023796] gpio-312 (tca9554_23_input): hogged as input [ 4.023903] gpio-313 (tca9554_23_input): hogged as input [ 4.024007] gpio-314 (tca9554_23_input): hogged as input [ 4.024113] gpio-315 (tca9554_23_input): hogged as input [ 4.024694] pca953x 2-0022: supply vcc not found, using dummy regulator [ 4.024769] pca953x 2-0022: using no AI [ 4.025162] gpio-300 (tca9554_22_input): hogged as input [ 4.025272] gpio-301 (tca9554_22_input): hogged as input [ 4.025379] gpio-302 (tca9554_22_input): hogged as input [ 4.025483] gpio-303 (tca9554_22_input): hogged as input [ 4.025590] gpio-304 (tca9554_22_input): hogged as input [ 4.025694] gpio-305 (tca9554_22_input): hogged as input [ 4.025801] gpio-306 (tca9554_22_input): hogged as input [ 4.025906] gpio-307 (tca9554_22_input): hogged as input [ 4.026435] pca953x 2-0021: supply vcc not found, using dummy regulator [ 4.026493] pca953x 2-0021: using no AI [ 4.026876] gpio-292 (tca9554_21_input): hogged as input [ 4.026983] gpio-293 (tca9554_21_input): hogged as input [ 4.027091] gpio-294 (tca9554_21_input): hogged as input [ 4.027200] gpio-295 (tca9554_21_input): hogged as input [ 4.027307] gpio-296 (tca9554_21_input): hogged as input [ 4.027417] gpio-297 (tca9554_21_input): hogged as input [ 4.027524] gpio-298 (tca9554_21_input): hogged as input [ 4.027631] gpio-299 (tca9554_21_input): hogged as input [ 4.028147] pca953x 2-0020: supply vcc not found, using dummy regulator [ 4.028198] pca953x 2-0020: using no AI [ 4.028582] gpio-284 (tca9554_20_input): hogged as input [ 4.028692] gpio-285 (tca9554_20_input): hogged as input [ 4.028797] gpio-286 (tca9554_20_input): hogged as input [ 4.028905] gpio-287 (tca9554_20_input): hogged as input [ 4.029010] gpio-288 (tca9554_20_input): hogged as input [ 4.029118] gpio-289 (tca9554_20_input): hogged as input [ 4.029227] gpio-290 (tca9554_20_input): hogged as input [ 4.029332] gpio-291 (tca9554_20_input): hogged as input [ 4.031808] i2c i2c-9: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@0/bmi088_b_@4b [ 4.031821] i2c i2c-9: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@0/bmi088_b_@4b [ 4.031830] i2c i2c-9: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@0/bmi088_a_@3b [ 4.031838] i2c i2c-9: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@0/bmi088_a_@3b [ 4.033653] i2c i2c-2: Added multiplexed i2c bus 9 [ 4.034748] i2c i2c-10: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@1/bmi088_d_@4b [ 4.034758] i2c i2c-10: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@1/bmi088_d_@4b [ 4.034768] i2c i2c-10: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@1/bmi088_c_@3b [ 4.034774] i2c i2c-10: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@1/bmi088_c_@3b [ 4.036599] i2c i2c-2: Added multiplexed i2c bus 10 [ 4.037755] i2c i2c-11: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@2/bmi088_f_@4b [ 4.037764] i2c i2c-11: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@2/bmi088_f_@4b [ 4.037774] i2c i2c-11: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@2/bmi088_e_@3b [ 4.037780] i2c i2c-11: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@2/bmi088_e_@3b [ 4.039685] i2c i2c-2: Added multiplexed i2c bus 11 [ 4.040778] i2c i2c-12: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@3/bmi088_h_@4b [ 4.040787] i2c i2c-12: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@3/bmi088_h_@4b [ 4.040796] i2c i2c-12: of_i2c: modalias failure on /bus@0/i2c@3180000/tca9546@70/i2c@3/bmi088_g_@3b [ 4.040805] i2c i2c-12: Failed to create I2C device for /bus@0/i2c@3180000/tca9546@70/i2c@3/bmi088_g_@3b [ 4.042696] i2c i2c-2: Added multiplexed i2c bus 12 [ 4.042706] pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 4.043538] tegra-i2c 3190000.i2c: Adding to iommu group 1 [ 4.050180] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 4.056573] tegra-i2c 31c0000.i2c: Adding to iommu group 1 [ 4.062986] tegra-i2c 31e0000.i2c: Adding to iommu group 1 [ 4.067733] pca953x 8-0020: supply vcc not found, using dummy regulator [ 4.067856] pca953x 8-0020: using no AI [ 4.070253] gpio-276 (tca9554_20_outlow): hogged as output/low [ 4.070900] gpio-277 (tca9554_20_outlow): hogged as output/low [ 4.071545] gpio-278 (tca9554_20_outlow): hogged as output/low [ 4.072183] gpio-279 (tca9554_20_outlow): hogged as output/low [ 4.072823] gpio-280 (tca9554_20_outlow): hogged as output/low [ 4.073459] gpio-281 (tca9554_20_outlow): hogged as output/low [ 4.074096] gpio-282 (tca9554_20_outlow): hogged as output/low [ 4.074735] gpio-283 (tca9554_20_outlow): hogged as output/low [ 4.076018] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 4.082702] pca953x 1-0020: using no AI [ 4.084558] pca953x 1-0021: using no AI [ 4.086153] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 4.122168] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 4.125686] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 4.129336] sdhci-tegra 3460000.mmc: Adding to iommu group 2 [ 4.135242] irq: IRQ240: trimming hierarchy from :bus@0:pmc@c360000 [ 4.136385] tegra-xusb 3610000.usb: Adding to iommu group 3 [ 4.142285] mmc0: CQHCI version 5.10 [ 4.151086] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 4.151094] tegra-xusb 3610000.usb: xHCI Host Controller [ 4.151104] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 4.151851] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 4.151872] tegra-xusb 3610000.usb: irq 127, io mem 0x03610000 [ 4.151986] tegra-xusb 3610000.usb: xHCI Host Controller [ 4.151989] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 4.151992] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 4.152676] hub 1-0:1.0: USB hub found [ 4.152691] hub 1-0:1.0: 4 ports detected [ 4.152955] hub 2-0:1.0: USB hub found [ 4.152965] hub 2-0:1.0: 4 ports detected [ 4.154067] sdhci-tegra 3400000.mmc: Adding to iommu group 4 [ 4.154518] irq: IRQ248: trimming hierarchy from :bus@0:pmc@c360000 [ 4.154572] irq: IRQ249: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 4.154613] irq: IRQ250: trimming hierarchy from :bus@0:pmc@c360000 [ 4.154667] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.488249] usb 1-4: new high-speed USB device number 2 using tegra-xusb [ 4.640710] hub 1-4:1.0: USB hub found [ 4.641196] hub 1-4:1.0: 7 ports detected [ 4.660594] ALSA device list: [ 4.660599] No soundcards found. [ 4.665552] sdhci-tegra 3400000.mmc: Got CD GPIO [ 4.678833] mmc0: SDHCI controller on 3460000.mmc [3460000.mmc] using ADMA 64-bit [ 4.712207] irq: IRQ251: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 4.712519] mmc1: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [ 4.713528] Freeing unused kernel memory: 7680K [ 4.713591] Run /init as init process [ 4.713593] with arguments: [ 4.713593] /init [ 4.713594] with environment: [ 4.713594] HOME=/ [ 4.713595] TERM=linux [ 4.713595] bl_prof_dataptr=2031616@0x102C610000 [ 4.713596] bl_prof_ro_ptr=65536@0x102C600000 [ 4.731297] Checking overlayfs setting... [ 4.740841] Overlayfs is disabled... [ 4.746987] Root device found: mmcblk0p1 [ 4.768581] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 4.777710] mmc0: Command Queue Engine enabled [ 4.777718] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.777972] mmcblk0: mmc0:0001 DG4064 59.2 GiB [ 4.781069] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 4.781512] mmcblk0boot0: mmc0:0001 DG4064 4.00 MiB [ 4.781929] mmcblk0boot1: mmc0:0001 DG4064 4.00 MiB [ 4.782304] mmcblk0rpmb: mmc0:0001 DG4064 4.00 MiB, chardev (511:0) [ 4.796174] usb 2-1: LPM exit latency is zeroed, disabling LPM. [ 4.797677] usb 2-1: config 1 has an invalid interface number: 12 but max is 4 [ 4.797679] usb 2-1: config 1 has an invalid interface number: 13 but max is 4 [ 4.797680] usb 2-1: config 1 has an invalid interface number: 13 but max is 4 [ 4.797681] usb 2-1: config 1 has no interface number 1 [ 4.797682] usb 2-1: config 1 has no interface number 4 [ 4.944251] usb 1-4.4: new full-speed USB device number 3 using tegra-xusb [ 7.808424] Found dev node: /dev/mmcblk0p1 [ 8.260500] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 8.260510] EXT4-fs (mmcblk0p1): recovery complete [ 8.269016] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 8.278008] Rootfs mounted over mmcblk0p1 [ 8.293591] Switching from initrd to actual rootfs [ 8.429043] systemd[1]: System time before build time, advancing clock. [ 8.469368] NET: Registered PF_INET6 protocol family [ 8.470398] Segment Routing with IPv6 [ 8.470404] In-situ OAM (IOAM) with IPv6 [ 8.494680] systemd[1]: systemd 249.11-0ubuntu3.16 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 8.495043] systemd[1]: Detected architecture arm64. [ 8.497277] systemd[1]: Hostname set to . [ 8.541601] systemd[1]: Using hardware watchdog 'NVIDIA Tegra186 WDT', version 0, device /dev/watchdog [ 8.541618] systemd[1]: Set hardware watchdog to 2min. [ 8.733368] systemd[1]: /etc/systemd/system/zed_x_daemon.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 8.733387] systemd[1]: /etc/systemd/system/zed_x_daemon.service:13: Unknown key name 'Port' in section 'Service', ignoring. [ 8.733392] systemd[1]: /etc/systemd/system/zed_x_daemon.service:14: Unknown key name 'PortSub' in section 'Service', ignoring. [ 8.733395] systemd[1]: /etc/systemd/system/zed_x_daemon.service:15: Unknown key name 'VICBooster' in section 'Service', ignoring. [ 8.762063] systemd[1]: /lib/systemd/system/snapd.service:23: Unknown key name 'RestartMode' in section 'Service', ignoring. [ 8.781980] systemd[1]: /etc/systemd/system/nvs-service.service:41: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 8.789538] systemd[1]: /etc/systemd/system/nvargus-daemon.service:50: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 8.852118] systemd[1]: Queued start job for default target Graphical Interface. [ 8.853923] systemd[1]: Created slice Slice /system/modprobe. [ 8.854597] systemd[1]: Created slice Slice /system/serial-getty. [ 8.855181] systemd[1]: Created slice Slice /system/systemd-fsck. [ 8.855576] systemd[1]: Created slice User and Session Slice. [ 8.855721] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.856046] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.856246] systemd[1]: Reached target Slice Units. [ 8.885665] systemd[1]: Reached target Mounting snaps. [ 8.923174] systemd[1]: Reached target Swaps. [ 8.923267] systemd[1]: Reached target Local Verity Protected Volumes. [ 8.923413] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.923616] systemd[1]: Listening on LVM2 poll daemon socket. [ 8.930208] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.958180] systemd[1]: Listening on Syslog Socket. [ 8.958403] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.958535] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.958848] systemd[1]: Listening on Journal Audit Socket. [ 8.959007] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.959204] systemd[1]: Listening on Journal Socket. [ 8.959462] systemd[1]: Listening on udev Control Socket. [ 8.959599] systemd[1]: Listening on udev Kernel Socket. [ 8.961004] systemd[1]: Mounting Huge Pages File System... [ 9.012589] systemd[1]: Mounting POSIX Message Queue File System... [ 9.024689] systemd[1]: Mounting Kernel Debug File System... [ 9.025946] systemd[1]: Mounting Kernel Trace File System... [ 9.034476] systemd[1]: Starting Journal Service... [ 9.046154] systemd[1]: Finished Availability of block devices. [ 9.047689] systemd[1]: Starting Set the console keyboard layout... [ 9.049243] systemd[1]: Starting Create List of Static Device Nodes... [ 9.070328] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 9.071528] systemd[1]: Starting Load Kernel Module configfs... [ 9.073168] systemd[1]: Starting Load Kernel Module drm... [ 9.096508] systemd[1]: Starting Load Kernel Module efi_pstore... [ 9.097780] systemd[1]: Starting Load Kernel Module fuse... [ 9.099149] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 9.100799] systemd[1]: Started Nameserver information manager. [ 9.114128] fuse: init (API version 7.34) [ 9.129812] systemd[1]: Reached target Preparation for Network. [ 9.130035] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.132592] systemd[1]: Starting Load Kernel Modules... [ 9.141307] nvsciipc: loading out-of-tree module taints kernel. [ 9.148262] nvsciipc: loaded module [ 9.161513] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 9.162241] nvmap_co_device_init: vpr :dma coherent mem declare 0x0000001049800000,914358272 [ 9.162247] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 9.162257] nvmap_page_pool_init: Total RAM pages: 16086975 [ 9.162259] nvmap_page_pool_init: nvmap page pool size: 2010871 pages (3758 MB) [ 9.162328] nvmap_background_zero_thread: PP zeroing thread starting. [ 9.162345] nvmap_heap_create: created heap vpr base 0x0000001049800000 size (892928KiB) [ 9.162376] nvmap_heap_create: fsi :dma coherent mem declare 0x000000102f000000,16777216 [ 9.162378] nvmap_heap_create: created heap fsi base 0x000000102f000000 size (16384KiB) [ 9.171690] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.179136] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null). Quota mode: none. [ 9.180342] tegra-host1x 13e00000.host1x: Adding to iommu group 5 [ 9.181532] host1x-context host1x-ctx.0: Adding to iommu group 6 [ 9.181667] host1x-context host1x-ctx.1: Adding to iommu group 7 [ 9.181789] host1x-context host1x-ctx.2: Adding to iommu group 8 [ 9.181914] host1x-context host1x-ctx.3: Adding to iommu group 9 [ 9.182035] host1x-context host1x-ctx.4: Adding to iommu group 10 [ 9.182149] host1x-context host1x-ctx.5: Adding to iommu group 11 [ 9.182261] host1x-context host1x-ctx.6: Adding to iommu group 12 [ 9.182378] host1x-context host1x-ctx.7: Adding to iommu group 13 [ 9.182501] host1x-context host1x-ctx.8: Adding to iommu group 14 [ 9.182625] host1x-context host1x-ctx.9: Adding to iommu group 15 [ 9.182777] host1x-context host1x-ctx.10: Adding to iommu group 16 [ 9.182891] host1x-context host1x-ctx.11: Adding to iommu group 17 [ 9.183006] host1x-context host1x-ctx.12: Adding to iommu group 18 [ 9.183125] host1x-context host1x-ctx.13: Adding to iommu group 19 [ 9.183241] host1x-context host1x-ctx.14: Adding to iommu group 20 [ 9.183364] host1x-context host1x-ctx.15: Adding to iommu group 21 [ 9.191549] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0038 [ 9.191575] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0030 [ 9.191590] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0039 [ 9.191605] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0031 [ 9.191620] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0010 [ 9.191634] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-0011 [ 9.191649] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-001a [ 9.191663] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-003e [ 9.191677] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-002e [ 9.191692] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-003f [ 9.191705] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-002f [ 9.191717] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-004e [ 9.191732] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 9-004f [ 9.191746] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0038 [ 9.191761] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0030 [ 9.191774] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0039 [ 9.191787] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0031 [ 9.191800] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0010 [ 9.191811] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-0011 [ 9.191823] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-001a [ 9.191836] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-003e [ 9.191849] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-002e [ 9.191862] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-003f [ 9.191875] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-002f [ 9.191889] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-004e [ 9.191902] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 10-004f [ 9.191916] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0038 [ 9.191928] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0030 [ 9.191943] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0039 [ 9.191954] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0031 [ 9.191969] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0010 [ 9.191982] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-0011 [ 9.191997] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-001a [ 9.192009] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-003e [ 9.192021] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-002e [ 9.192032] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-003f [ 9.192045] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-002f [ 9.192057] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-004e [ 9.192084] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 11-004f [ 9.192097] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0038 [ 9.192116] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0030 [ 9.192138] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0039 [ 9.192150] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0031 [ 9.192162] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0010 [ 9.192176] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-0011 [ 9.192191] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-001a [ 9.192212] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-003e [ 9.192231] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-002e [ 9.192246] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-003f [ 9.192259] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-002f [ 9.192271] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-004e [ 9.192282] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with 12-004f [ 9.192295] platform 13e00000.host1x:nvcsi@15a00000: Fixing up cyclic dependency with tegra-capture-vi [ 9.250358] systemd[1]: Starting Coldplug All udev Devices... [ 9.255986] nvgpu: 17000000.gpu nvgpu_nvhost_syncpt_init:122 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 9.304432] systemd[1]: Started Journal Service. [ 9.894601] systemd-journald[279]: Received client request to flush runtime journal. [ 10.301607] ftpm-tee firmware:ftpm: ftpm_tee_probe: tee_client_open_session failed, err=ffff3024 [ 10.301622] ftpm-tee: probe of firmware:ftpm failed with error -22 [ 10.405805] mc: Linux media interface: v0.10 [ 10.409546] tsec 15500000.tsec: Adding to iommu group 22 [ 10.414003] tegra-soc-hwpm f100000.hwpm: Adding to iommu group 23 [ 10.423670] videodev: Linux video capture interface: v2.00 [ 10.431151] scare-pigeon 13e00000.host1x:vi0-thi@15f00000: Adding to iommu group 24 [ 10.432250] pva 16000000.pva0: Adding to iommu group 25 [ 10.432266] scare-pigeon 13e00000.host1x:vi0-thi@15f00000: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.436919] scare-pigeon 13e00000.host1x:vi1-thi@14f00000: Adding to iommu group 26 [ 10.441595] scare-pigeon 13e00000.host1x:vi1-thi@14f00000: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.444499] scare-pigeon 13e00000.host1x:isp-thi@14b00000: Adding to iommu group 27 [ 10.448622] scare-pigeon 13e00000.host1x:isp-thi@14b00000: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.448679] nvdla 15880000.nvdla0: Adding to iommu group 28 [ 10.451862] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 29 [ 10.453213] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 10.459475] nvdla 15880000.nvdla0: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.459985] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 30 [ 10.460938] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 10.461578] nvdla 158c0000.nvdla1: Adding to iommu group 31 [ 10.465759] tegra-vic 15340000.vic: Adding to iommu group 32 [ 10.470040] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 33 [ 10.471479] nvdla 158c0000.nvdla1: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.472701] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 10.484852] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 34 [ 10.486392] tegra-nvdec 15480000.nvdec: Adding to iommu group 35 [ 10.486445] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 10.487091] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 36 [ 10.487188] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 10.487617] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 37 [ 10.487707] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 10.488064] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 38 [ 10.489146] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 10.492656] Inserting ivc_ext.ko module [ 10.495623] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 39 [ 10.496111] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 10.496364] pva 16000000.pva0: pdata->version is HW_GEN2 [ 10.500687] tegra-nvenc 154c0000.nvenc: Adding to iommu group 40 [ 10.502107] pva 16000000.pva0: Completed nvhost_client_device_init [ 10.503293] pva 16000000.pva0: syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.513879] tegra-nvjpg 15380000.nvjpg: Adding to iommu group 41 [ 10.515408] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 42 [ 10.516809] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 10.517288] tegra-nvjpg 15540000.nvjpg: Adding to iommu group 43 [ 10.523192] tsec 15500000.tsec: tsec fw req success in 100 ms [ 10.525392] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee027f size=131712 [ 10.526425] tsec 15500000.tsec: RISC-V boot using kernel allocated Mem [ 10.526525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 10.526815] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x512]=0x1900-0x1b80 TX[1x512]=0x1b80-0x1e00 [ 10.527269] tegra-ofa 15a50000.ofa: Adding to iommu group 44 [ 10.528693] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1e00-0x3e80 TX[1x8192]=0x3e80-0x5f00 [ 10.528912] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5f00-0xaf80 TX[64x320]=0xaf80-0x10000 [ 10.529254] drm drm: [drm] Cannot find any crtc or sizes [ 10.530117] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0x10000-0x18080 TX[512x64]=0x18080-0x20100 [ 10.530712] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20100-0x201c0 TX[1x64]=0x201c0-0x20280 [ 10.530983] [drm] Initialized tegra 1.0.99 20120330 for drm on minor 0 [ 10.532822] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (238) [ 10.532827] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 10.533103] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=e2238c99959d2df9350d393f04e1f44e5bef98cb [ 10.533105] tsec 15500000.tsec: RISC-V boot success [ 10.533234] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: ivc channel driver missing [ 10.533237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: ivc channel driver missing [ 10.533239] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: ivc channel driver missing [ 10.533241] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivc channel driver missing [ 10.533242] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivc channel driver missing [ 10.533244] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: ivc channel driver missing [ 10.533249] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 10.533252] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 10.533254] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 10.576100] [RCE] TCU debug prints will be routed to traces. [ 10.802061] tegra-dce d800000.dce: Adding to iommu group 45 [ 10.802489] dce: dce_ipc_channel_init:311 Invalid Channel State [0x0] for ch_type [2] [ 10.802723] dce: tegra_dce_probe:245 Found display consumer device [ 10.803228] dce: dce_mailbox_set_full_interrupt:157 Intr bit set multiple times for MB : [0x5] [ 10.803234] dce: dce_mailbox_set_full_interrupt:157 Intr bit set multiple times for MB : [0x5] [ 10.803476] dce: dce_admin_send_cmd_ver:456 version : [0x3] err : [0x0] [ 10.803664] dce: dce_mailbox_set_full_interrupt:157 Intr bit set multiple times for MB : [0x1] [ 10.803670] dce: dce_mailbox_set_full_interrupt:157 Intr bit set multiple times for MB : [0x1] [ 10.803677] dce: dce_admin_setup_clients_ipc:585 Channel Reset Complete for Type [1] ... [ 10.803678] dce: dce_admin_setup_clients_ipc:561 Get queue info failed for [2] [ 10.803876] dce: dce_mailbox_set_full_interrupt:157 Intr bit set multiple times for MB : [0x2] [ 10.803882] dce: dce_admin_setup_clients_ipc:585 Channel Reset Complete for Type [3] ... [ 10.804857] dce: dce_start_boot_flow:166 DCE_BOOT_DONE [ 10.805805] tegra194-isp5 14800000.isp: Adding to iommu group 27 [ 10.805899] tegra194-vi5 13e00000.host1x:vi0@15c00000: Adding to iommu group 24 [ 10.806362] nvvrs11 4-0020: NVVRS11 Vendor ID: 0x11 [ 10.806686] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 10.807253] nvvrs11 4-0020: NVVRS11 Model Rev: 0x81 [ 10.807254] nvvrs11 4-0020: NVVRS11 probe successful [ 10.807515] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 10.807632] hwmon hwmon4: temp1_input not attached to any thermal zone [ 10.807870] hwmon hwmon4: temp2_input not attached to any thermal zone [ 10.808317] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful [ 10.808551] nvvrs11 4-0022: NVVRS11 Vendor ID: 0x11 [ 10.808609] tegra194-vi5 13e00000.host1x:vi1@14c00000: Adding to iommu group 26 [ 10.808706] (NULL device *): fops function table already registered [ 10.809088] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809107] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809114] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809120] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809126] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809130] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809135] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809139] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809147] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809152] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809157] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809162] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809167] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809172] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809183] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809188] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809194] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809200] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809207] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809214] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809220] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809227] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809237] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809245] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809255] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809264] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809272] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809280] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809289] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809297] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809308] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809318] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809327] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809340] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809351] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809361] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809373] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809385] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809397] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809409] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809422] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809435] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809450] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809463] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809477] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809491] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809497] nvvrs11 4-0022: NVVRS11 Model Rev: 0x81 [ 10.809499] nvvrs11 4-0022: NVVRS11 probe successful [ 10.809508] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809533] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809578] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809680] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809698] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.809713] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e00000.host1x:nvcsi@15a00000- bound [ 10.810348] nvvrs_pseq 4-003c: CAUTION: interrupt status reg:0x10 set to 0x40 [ 10.810352] nvvrs_pseq 4-003c: Clearing interrupts [ 10.841246] nvpps c6a0000.nvpps: nvpps_probe [ 10.841485] nvpps c6a0000.nvpps: primary-emac found ethernet@6800000 [ 10.841499] nvpps c6a0000.nvpps: primary emac base address 0x6810000 [ 10.841503] nvpps c6a0000.nvpps: using ptp notifier method on emac ethernet@6800000 [ 10.841504] nvpps c6a0000.nvpps: tsc_res_ns(32) [ 10.841515] nvpps c6a0000.nvpps: PPS GPIO not provided in DT, only Timer mode available [ 10.841615] nvpps c6a0000.nvpps: nvpps cdev(490:0) [ 10.841650] nvpps c6a0000.nvpps: TSC config ptx 0x113 [ 10.851923] nv_platform 13800000.display: Adding to iommu group 46 [ 10.885660] nvethernet 6800000.ethernet: Adding to iommu group 47 [ 10.888416] nvethernet 6800000.ethernet: failed to read skip mac reset flag, default 0 [ 10.888426] nvethernet 6800000.ethernet: setting to default DMA bit mask [ 10.888523] nvethernet 6800000.ethernet: failed to read UPHY GBE mode- default to 10G [ 10.892096] platform 13800000.display:nvdisplay-niso: Adding to iommu group 48 [ 10.903659] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 10.941888] spi-tegra114 3210000.spi: Adding to iommu group 1 [ 10.949476] tegra-xudc 3550000.usb: Adding to iommu group 49 [ 10.958760] tegra-hda 3510000.hda: Adding to iommu group 50 [ 10.972918] spi-tegra114 3230000.spi: Adding to iommu group 1 [ 10.995728] tegra194-pcie 14100000.pcie: Adding to iommu group 51 [ 11.005792] tegra194-pcie 14100000.pcie: host bridge /bus@0/pcie@14100000 ranges: [ 11.005818] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 11.005825] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 11.005828] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 11.006126] tegra194-pcie 14100000.pcie: iATU unroll: enabled [ 11.006129] tegra194-pcie 14100000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 11.036548] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/bus@0/3510000.hda/sound/card0/input1 [ 11.048812] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/bus@0/3510000.hda/sound/card0/input2 [ 11.051003] tegra234-aon c000000.aon: Adding to iommu group 52 [ 11.052423] c000000.aon:hsp: probed [ 11.052619] tegra234-aon c000000.aon: init done [ 11.053308] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/bus@0/3510000.hda/sound/card0/input3 [ 11.059607] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/bus@0/3510000.hda/sound/card0/input4 [ 11.059876] gic 2a41000.interrupt-controller: GIC IRQ controller registered [ 11.060102] tegra-aconnect bus@0:aconnect@2900000: Tegra ACONNECT bus registered [ 11.070823] CAN device driver interface [ 11.087692] TT CAN feature is not supported [ 11.088283] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| | mram size |0x00001000| [ 11.089986] thermal-trip-event cpu-throttle-alert: cooling device registered. [ 11.090527] Release 3.2.3 from 09.06.2018 [ 11.092732] thermal-trip-event gpu-throttle-alert: cooling device registered. [ 11.096802] thermal-trip-event cv0-throttle-alert: cooling device registered. [ 11.098441] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 11.100249] thermal-trip-event cv1-throttle-alert: cooling device registered. [ 11.110953] thermal-trip-event cv2-throttle-alert: cooling device registered. [ 11.112094] tegra194-pcie 14100000.pcie: Link up [ 11.113752] net can0: mttcan device registered (regs=00000000a06dedd4, irq=218) [ 11.113776] tegra194-pcie 14100000.pcie: Link up [ 11.116397] TT CAN feature is not supported [ 11.116981] Message RAM Configuration | base addr |0x0c322000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| | mram size |0x00001000| [ 11.118341] Release 3.2.3 from 09.06.2018 [ 11.119173] thermal-trip-event soc0-throttle-alert: cooling device registered. [ 11.119412] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 11.119419] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 11.119422] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 11.119425] pci_bus 0001:00: root bus resource [bus 00-ff] [ 11.119430] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 11.119483] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 11.119652] pci 0001:00:00.0: PME# supported from D0 D3hot [ 11.124688] thermal-trip-event soc1-throttle-alert: cooling device registered. [ 11.132943] thermal-trip-event soc2-throttle-alert: cooling device registered. [ 11.134950] pci 0001:01:00.0: [12d8:b404] type 01 class 0x060400 [ 11.136354] pci 0001:01:00.0: supports D1 D2 [ 11.136357] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.141318] thermal-trip-event hot-surface-alert: cooling device registered. [ 11.147115] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.148230] pci 0001:02:01.0: [12d8:b404] type 01 class 0x060400 [ 11.149664] pci 0001:02:01.0: supports D1 D2 [ 11.149666] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.150809] net can1: mttcan device registered (regs=0000000063af5ec4, irq=219) [ 11.173843] pci 0001:02:02.0: [12d8:b404] type 01 class 0x060400 [ 11.175299] pci 0001:02:02.0: supports D1 D2 [ 11.175301] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.186418] pci 0001:02:03.0: [12d8:b404] type 01 class 0x060400 [ 11.187843] pci 0001:02:03.0: supports D1 D2 [ 11.187846] pci 0001:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.221790] pci 0001:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.221864] pci 0001:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.221930] pci 0001:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.234277] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03 [ 11.235151] pci 0001:04:00.0: [8086:2725] type 00 class 0x028000 [ 11.235364] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 11.236569] pci 0001:04:00.0: PME# supported from D0 D3hot D3cold [ 11.249617] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04 [ 11.255472] pci_bus 0001:05: busn_res: [bus 05-ff] end is updated to 05 [ 11.255515] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 05 [ 11.255575] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 11.255580] pci 0001:01:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 11.255583] pci 0001:02:02.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 11.255586] pci 0001:02:01.0: PCI bridge to [bus 03] [ 11.255701] pci 0001:04:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a8003fff 64bit] [ 11.255793] pci 0001:02:02.0: PCI bridge to [bus 04] [ 11.255831] pci 0001:02:02.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 11.255907] pci 0001:02:03.0: PCI bridge to [bus 05] [ 11.256019] pci 0001:01:00.0: PCI bridge to [bus 02-05] [ 11.256056] pci 0001:01:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 11.256146] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 11.256151] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 11.257741] pcieport 0001:00:00.0: Adding to iommu group 51 [ 11.258893] pcieport 0001:00:00.0: PME: Signaling with IRQ 200 [ 11.259886] pcieport 0001:00:00.0: AER: enabled with IRQ 200 [ 11.265755] qcserial: module verification failed: signature and/or required key missing - tainting kernel [ 11.272415] pcieport 0001:01:00.0: Adding to iommu group 51 [ 11.272887] pcieport 0001:01:00.0: enabling device (0000 -> 0002) [ 11.273012] nvethernet 6800000.ethernet: Ethernet MAC address: 00:a0:10:02:d3:64 [ 11.275057] usbcore: registered new interface driver qcserial [ 11.275795] usbserial: USB Serial support registered for Qualcomm USB modem [ 11.276955] usbcore: registered new interface driver cdc_ether [ 11.277700] qcserial 2-1:1.0: Qualcomm USB modem converter detected [ 11.279781] usb 2-1: Qualcomm USB modem converter now attached to ttyUSB0 [ 11.282661] qcserial 2-1:1.2: Qualcomm USB modem converter detected [ 11.284430] pcieport 0001:02:01.0: Adding to iommu group 51 [ 11.285963] usb 2-1: Qualcomm USB modem converter now attached to ttyUSB1 [ 11.288887] usbcore: registered new interface driver cdc_wdm [ 11.289015] qcserial 2-1:1.3: Qualcomm USB modem converter detected [ 11.291452] usb 2-1: Qualcomm USB modem converter now attached to ttyUSB2 [ 11.291927] -->macsec_probe() [ 11.291983] nvethernet 6800000.ethernet: macsec parameter is missing or disabled [ 11.291986] <--macsec_probe() [ 11.291987] nvethernet 6800000.ethernet: Macsec not supported/Not enabled [ 11.293461] usbcore: registered new interface driver cdc_ncm [ 11.295365] nvethernet 6800000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 11.299930] nvethernet 2310000.ethernet: Adding to iommu group 53 [ 11.300138] nvethernet 2310000.ethernet: failed to read skip mac reset flag, default 0 [ 11.300143] nvethernet 2310000.ethernet: failed to read MDIO address [ 11.300148] nvethernet 2310000.ethernet: setting to default DMA bit mask [ 11.303432] pcieport 0001:02:02.0: Adding to iommu group 51 [ 11.303926] pcieport 0001:02:02.0: enabling device (0000 -> 0002) [ 11.324052] pcieport 0001:02:03.0: Adding to iommu group 51 [ 11.324394] usbcore: registered new interface driver btusb [ 11.327665] Bluetooth: hci0: Device revision is 0 [ 11.327673] Bluetooth: hci0: Secure boot is enabled [ 11.327675] Bluetooth: hci0: OTP lock is enabled [ 11.327676] Bluetooth: hci0: API lock is enabled [ 11.327677] Bluetooth: hci0: Debug lock is disabled [ 11.327679] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 11.327681] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 11.331987] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 11.346291] tegra194-pcie 14160000.pcie: Adding to iommu group 54 [ 11.359187] tegra194-pcie 14160000.pcie: host bridge /bus@0/pcie@14160000 ranges: [ 11.359213] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 11.359219] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 11.359222] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 11.359542] tegra194-pcie 14160000.pcie: iATU unroll: enabled [ 11.359544] tegra194-pcie 14160000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 11.464091] tegra194-pcie 14160000.pcie: Link up [ 11.465681] tegra194-pcie 14160000.pcie: Link up [ 11.469490] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 11.469497] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 11.469500] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.469502] pci_bus 0004:00: root bus resource [bus 00-ff] [ 11.469504] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 11.469549] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 11.469699] pci 0004:00:00.0: PME# supported from D0 D3hot [ 11.496853] loop0: detected capacity change from 0 to 8 [ 11.497181] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 11.498469] nvvrs-pseq-rtc nvvrs-pseq-rtc: setting system clock to 2025-10-23T15:05:31 UTC (1761231931) [ 11.500925] pci 0004:01:00.0: [1bcd:0920] type 00 class 0x010802 [ 11.501124] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 11.501423] pci 0004:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 11.517523] loop1: detected capacity change from 0 to 376664 [ 11.518215] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 11.518225] pci 0004:01:00.0: BAR 6: assigned [mem 0x2428000000-0x242801ffff pref] [ 11.518229] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428020000-0x2428023fff 64bit] [ 11.518315] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 11.518321] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 11.526313] pcieport 0004:00:00.0: Adding to iommu group 54 [ 11.531070] loop2: detected capacity change from 0 to 141096 [ 11.531800] pcieport 0004:00:00.0: PME: Signaling with IRQ 202 [ 11.532229] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 11.532231] unable to read xattr id index table [ 11.543478] pcieport 0004:00:00.0: AER: enabled with IRQ 202 [ 11.547229] nvethernet 2310000.ethernet: Ethernet MAC address: 00:a0:10:02:d3:65 [ 11.548503] loop3: detected capacity change from 0 to 97448 [ 11.558918] tegra194-pcie 141a0000.pcie: Adding to iommu group 55 [ 11.579642] -->macsec_probe() [ 11.579681] nvethernet 2310000.ethernet: macsec parameter is missing or disabled [ 11.579684] <--macsec_probe() [ 11.579685] nvethernet 2310000.ethernet: Macsec not supported/Not enabled [ 11.581181] nvethernet 2310000.ethernet: eth1 (HW ver: 53) created with 8 DMA channels [ 11.581449] loop4: detected capacity change from 0 to 1010952 [ 11.590683] tegra194-pcie 141a0000.pcie: host bridge /bus@0/pcie@141a0000 ranges: [ 11.590706] tegra194-pcie 141a0000.pcie: MEM 0x2800000000..0x2b27ffffff -> 0x2800000000 [ 11.590712] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 11.590715] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 11.591051] tegra194-pcie 141a0000.pcie: iATU unroll: enabled [ 11.591087] tegra194-pcie 141a0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 11.593606] loop5: detected capacity change from 0 to 187776 [ 11.602091] loop6: detected capacity change from 0 to 90656 [ 11.603349] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 11.603353] unable to read xattr id index table [ 11.611069] loop7: detected capacity change from 0 to 90800 [ 11.616664] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 11.616670] unable to read xattr id index table [ 11.639982] nvethernet 6800000.ethernet lan1: renamed from eth0 [ 11.641970] platform 2901000.i2s: Fixing up cyclic dependency with 8-001c [ 11.676908] nvethernet 2310000.ethernet lan2: renamed from eth1 [ 11.696093] tegra194-pcie 141a0000.pcie: Link up [ 11.697812] tegra194-pcie 141a0000.pcie: Link up [ 11.707236] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 11.707245] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 11.707249] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.707251] pci_bus 0005:00: root bus resource [bus 00-ff] [ 11.707253] pci_bus 0005:00: root bus resource [mem 0x2800000000-0x2b27ffffff pref] [ 11.707303] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 11.707470] pci 0005:00:00.0: PME# supported from D0 D3hot [ 11.721133] pci 0005:01:00.0: [12d8:b404] type 01 class 0x060400 [ 11.722768] pci 0005:01:00.0: supports D1 D2 [ 11.722772] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.740597] pci 0005:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.742907] pci 0005:02:01.0: [12d8:b404] type 01 class 0x060400 [ 11.744345] pci 0005:02:01.0: supports D1 D2 [ 11.744347] pci 0005:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.750602] pci 0005:02:02.0: [12d8:b404] type 01 class 0x060400 [ 11.752007] pci 0005:02:02.0: supports D1 D2 [ 11.752009] pci 0005:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.759042] pci 0005:02:03.0: [12d8:b404] type 01 class 0x060400 [ 11.760492] pci 0005:02:03.0: supports D1 D2 [ 11.760495] pci 0005:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.769006] pci 0005:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.769075] pci 0005:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.769139] pci 0005:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.769909] pci 0005:03:00.0: [8086:1533] type 00 class 0x020000 [ 11.770069] pci 0005:03:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 11.770203] pci 0005:03:00.0: reg 0x18: [io 0x0000-0x001f] [ 11.770269] pci 0005:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 11.770468] pci 0005:03:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 11.771217] pci 0005:03:00.0: PME# supported from D0 D3hot D3cold [ 11.776638] pci_bus 0005:03: busn_res: [bus 03-ff] end is updated to 03 [ 11.780839] pci 0005:04:00.0: [8086:1533] type 00 class 0x020000 [ 11.781002] pci 0005:04:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 11.781135] pci 0005:04:00.0: reg 0x18: [io 0x0000-0x001f] [ 11.781202] pci 0005:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 11.781401] pci 0005:04:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 11.782149] pci 0005:04:00.0: PME# supported from D0 D3hot D3cold [ 11.795800] nvme 0004:01:00.0: Adding to iommu group 54 [ 11.797702] pci_bus 0005:04: busn_res: [bus 04-ff] end is updated to 04 [ 11.798763] nvme nvme0: pci function 0004:01:00.0 [ 11.798825] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 11.802129] nvme nvme0: missing or invalid SUBNQN field. [ 11.804392] pci 0005:05:00.0: [12d8:b404] type 01 class 0x060400 [ 11.805806] pci 0005:05:00.0: supports D1 D2 [ 11.805808] pci 0005:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.821956] nvme nvme0: allocated 64 MiB host memory buffer. [ 11.836139] pci 0005:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.838926] pci 0005:06:01.0: [12d8:b404] type 01 class 0x060400 [ 11.840400] pci 0005:06:01.0: supports D1 D2 [ 11.840402] pci 0005:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.846364] cdc_mbim 2-1:1.12: setting rx_max = 16384 [ 11.847288] nvme nvme0: 8/0/0 default/read/poll queues [ 11.847860] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.848402] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.848576] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 11.848816] pci 0005:06:02.0: [12d8:b404] type 01 class 0x060400 [ 11.850260] pci 0005:06:02.0: supports D1 D2 [ 11.850262] pci 0005:06:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.855904] cdc_mbim 2-1:1.12: cdc-wdm0: USB WDM device [ 11.861602] pci 0005:06:03.0: [12d8:b404] type 01 class 0x060400 [ 11.863042] pci 0005:06:03.0: supports D1 D2 [ 11.863044] pci 0005:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.868119] cdc_mbim 2-1:1.12 wwan0: register 'cdc_mbim' at usb-3610000.usb-1, CDC MBIM, ca:91:6c:1c:a9:83 [ 11.869647] usbcore: registered new interface driver cdc_mbim [ 11.875345] nvme0n1: p1 [ 11.878355] tegra-adma 2930000.dma-controller: Tegra210 ADMA driver registered 32 channels [ 11.880203] pci 0005:06:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.880274] pci 0005:06:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.880341] pci 0005:06:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.886530] pci 0005:07:00.0: [8086:1533] type 00 class 0x020000 [ 11.886701] pci 0005:07:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 11.886837] pci 0005:07:00.0: reg 0x18: [io 0x0000-0x001f] [ 11.886906] pci 0005:07:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 11.887109] pci 0005:07:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 11.887885] pci 0005:07:00.0: PME# supported from D0 D3hot D3cold [ 11.908031] pci_bus 0005:07: busn_res: [bus 07-ff] end is updated to 07 [ 11.909099] pci 0005:08:00.0: [8086:1533] type 00 class 0x020000 [ 11.909267] pci 0005:08:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 11.909403] pci 0005:08:00.0: reg 0x18: [io 0x0000-0x001f] [ 11.909471] pci 0005:08:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 11.909675] pci 0005:08:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 11.910447] pci 0005:08:00.0: PME# supported from D0 D3hot D3cold [ 11.917436] pci_bus 0005:08: busn_res: [bus 08-ff] end is updated to 08 [ 11.923016] pci_bus 0005:09: busn_res: [bus 09-ff] end is updated to 09 [ 11.923054] pci_bus 0005:06: busn_res: [bus 06-ff] end is updated to 09 [ 11.923082] pci_bus 0005:05: busn_res: [bus 05-ff] end is updated to 09 [ 11.923108] pci_bus 0005:02: busn_res: [bus 02-ff] end is updated to 09 [ 11.923173] pci 0005:00:00.0: BAR 14: assigned [mem 0x2b28000000-0x2b28bfffff] [ 11.923177] pci 0005:00:00.0: BAR 13: assigned [io 0x200000-0x203fff] [ 11.923180] pci 0005:01:00.0: BAR 14: assigned [mem 0x2b28000000-0x2b28bfffff] [ 11.923182] pci 0005:01:00.0: BAR 13: assigned [io 0x200000-0x203fff] [ 11.923186] pci 0005:02:01.0: BAR 14: assigned [mem 0x2b28000000-0x2b282fffff] [ 11.923188] pci 0005:02:02.0: BAR 14: assigned [mem 0x2b28300000-0x2b285fffff] [ 11.923190] pci 0005:02:03.0: BAR 14: assigned [mem 0x2b28600000-0x2b28bfffff] [ 11.923191] pci 0005:02:01.0: BAR 13: assigned [io 0x200000-0x200fff] [ 11.923192] pci 0005:02:02.0: BAR 13: assigned [io 0x201000-0x201fff] [ 11.923193] pci 0005:02:03.0: BAR 13: assigned [io 0x202000-0x203fff] [ 11.923196] pci 0005:03:00.0: BAR 0: assigned [mem 0x2b28000000-0x2b280fffff] [ 11.923225] pci 0005:03:00.0: BAR 6: assigned [mem 0x2b28100000-0x2b281fffff pref] [ 11.923227] pci 0005:03:00.0: BAR 3: assigned [mem 0x2b28200000-0x2b28203fff] [ 11.923254] pci 0005:03:00.0: BAR 2: assigned [io 0x200000-0x20001f] [ 11.923282] pci 0005:02:01.0: PCI bridge to [bus 03] [ 11.923296] pci 0005:02:01.0: bridge window [io 0x200000-0x200fff] [ 11.923332] pci 0005:02:01.0: bridge window [mem 0x2b28000000-0x2b282fffff] [ 11.923409] pci 0005:04:00.0: BAR 0: assigned [mem 0x2b28300000-0x2b283fffff] [ 11.923436] pci 0005:04:00.0: BAR 6: assigned [mem 0x2b28400000-0x2b284fffff pref] [ 11.923438] pci 0005:04:00.0: BAR 3: assigned [mem 0x2b28500000-0x2b28503fff] [ 11.923465] pci 0005:04:00.0: BAR 2: assigned [io 0x201000-0x20101f] [ 11.923493] pci 0005:02:02.0: PCI bridge to [bus 04] [ 11.923506] pci 0005:02:02.0: bridge window [io 0x201000-0x201fff] [ 11.923541] pci 0005:02:02.0: bridge window [mem 0x2b28300000-0x2b285fffff] [ 11.923617] pci 0005:05:00.0: BAR 14: assigned [mem 0x2b28600000-0x2b28bfffff] [ 11.923618] pci 0005:05:00.0: BAR 13: assigned [io 0x202000-0x203fff] [ 11.923621] pci 0005:06:01.0: BAR 14: assigned [mem 0x2b28600000-0x2b288fffff] [ 11.923623] pci 0005:06:02.0: BAR 14: assigned [mem 0x2b28900000-0x2b28bfffff] [ 11.923624] pci 0005:06:01.0: BAR 13: assigned [io 0x202000-0x202fff] [ 11.923625] pci 0005:06:02.0: BAR 13: assigned [io 0x203000-0x203fff] [ 11.923629] pci 0005:07:00.0: BAR 0: assigned [mem 0x2b28600000-0x2b286fffff] [ 11.923657] pci 0005:07:00.0: BAR 6: assigned [mem 0x2b28700000-0x2b287fffff pref] [ 11.923659] pci 0005:07:00.0: BAR 3: assigned [mem 0x2b28800000-0x2b28803fff] [ 11.923687] pci 0005:07:00.0: BAR 2: assigned [io 0x202000-0x20201f] [ 11.923716] pci 0005:06:01.0: PCI bridge to [bus 07] [ 11.923729] pci 0005:06:01.0: bridge window [io 0x202000-0x202fff] [ 11.923766] pci 0005:06:01.0: bridge window [mem 0x2b28600000-0x2b288fffff] [ 11.923845] pci 0005:08:00.0: BAR 0: assigned [mem 0x2b28900000-0x2b289fffff] [ 11.923874] pci 0005:08:00.0: BAR 6: assigned [mem 0x2b28a00000-0x2b28afffff pref] [ 11.923875] pci 0005:08:00.0: BAR 3: assigned [mem 0x2b28b00000-0x2b28b03fff] [ 11.923903] pci 0005:08:00.0: BAR 2: assigned [io 0x203000-0x20301f] [ 11.923932] pci 0005:06:02.0: PCI bridge to [bus 08] [ 11.923945] pci 0005:06:02.0: bridge window [io 0x203000-0x203fff] [ 11.923981] pci 0005:06:02.0: bridge window [mem 0x2b28900000-0x2b28bfffff] [ 11.924058] pci 0005:06:03.0: PCI bridge to [bus 09] [ 11.924191] pci 0005:05:00.0: PCI bridge to [bus 06-09] [ 11.924207] pci 0005:05:00.0: bridge window [io 0x202000-0x203fff] [ 11.924243] pci 0005:05:00.0: bridge window [mem 0x2b28600000-0x2b28bfffff] [ 11.924320] pci 0005:02:03.0: PCI bridge to [bus 05-09] [ 11.924336] pci 0005:02:03.0: bridge window [io 0x202000-0x203fff] [ 11.924372] pci 0005:02:03.0: bridge window [mem 0x2b28600000-0x2b28bfffff] [ 11.924448] pci 0005:01:00.0: PCI bridge to [bus 02-09] [ 11.924463] pci 0005:01:00.0: bridge window [io 0x200000-0x203fff] [ 11.924499] pci 0005:01:00.0: bridge window [mem 0x2b28000000-0x2b28bfffff] [ 11.924573] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.924577] pci 0005:00:00.0: bridge window [io 0x200000-0x203fff] [ 11.924581] pci 0005:00:00.0: bridge window [mem 0x2b28000000-0x2b28bfffff] [ 11.924834] pcieport 0005:00:00.0: Adding to iommu group 55 [ 11.925035] pcieport 0005:00:00.0: PME: Signaling with IRQ 204 [ 11.925404] pcieport 0005:00:00.0: AER: enabled with IRQ 204 [ 11.927750] pcieport 0005:01:00.0: Adding to iommu group 55 [ 11.928511] pcieport 0005:01:00.0: enabling device (0000 -> 0003) [ 11.933676] Intel(R) Wireless WiFi driver for Linux [ 11.933847] iwlwifi 0001:04:00.0: Adding to iommu group 51 [ 11.934034] iwlwifi 0001:04:00.0: enabling device (0000 -> 0002) [ 11.934837] pcieport 0005:02:01.0: Adding to iommu group 55 [ 11.934925] pcieport 0005:02:01.0: enabling device (0000 -> 0003) [ 11.936939] pcieport 0005:02:02.0: Adding to iommu group 55 [ 11.937026] pcieport 0005:02:02.0: enabling device (0000 -> 0003) [ 11.939063] pcieport 0005:02:03.0: Adding to iommu group 55 [ 11.939149] pcieport 0005:02:03.0: enabling device (0000 -> 0003) [ 11.941562] igb 0005:03:00.0: Adding to iommu group 55 [ 11.941749] igb 0005:03:00.0: enabling device (0000 -> 0002) [ 11.942140] iwlwifi 0001:04:00.0: api flags index 2 larger than supported by driver [ 11.942167] iwlwifi 0001:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.63.2.2 [ 11.942626] iwlwifi 0001:04:00.0: loaded firmware version 66.f1c864e0.0 ty-a0-gf-a0-66.ucode op_mode iwlmvm [ 12.070465] pps pps1: new PPS source ptp0 [ 12.096189] igb 0005:03:00.0: added PHC on eth0 [ 12.096236] igb 0005:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.096239] igb 0005:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:a0:10:02:c3:01 [ 12.096327] igb 0005:03:00.0: eth0: PBA No: 000300-000 [ 12.096330] igb 0005:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 12.098975] igb 0005:04:00.0: Adding to iommu group 55 [ 12.101719] igb 0005:04:00.0: enabling device (0000 -> 0002) [ 12.110592] iwlwifi 0001:04:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 12.126550] thermal thermal_zone9: failed to read out thermal zone (-61) [ 12.138917] tegra210-admaif 290f000.admaif: Adding to iommu group 56 [ 12.294711] iwlwifi 0001:04:00.0: loaded PNVM version 0x581d4936 [ 12.310427] iwlwifi 0001:04:00.0: Detected RF GF, rfid=0x10d000 [ 12.380590] iwlwifi 0001:04:00.0: base HW address: 10:5f:ad:c4:78:27 [ 12.395038] igb 0005:03:00.0 poe1: renamed from eth0 [ 12.417300] pps pps2: new PPS source ptp1 [ 12.417708] igb 0005:04:00.0: added PHC on eth0 [ 12.417747] igb 0005:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.417749] igb 0005:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:a0:10:02:c3:02 [ 12.417835] igb 0005:04:00.0: eth0: PBA No: 000300-000 [ 12.417836] igb 0005:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 12.418095] pcieport 0005:05:00.0: Adding to iommu group 55 [ 12.418225] pcieport 0005:05:00.0: enabling device (0000 -> 0003) [ 12.421108] igb 0005:04:00.0 poe2: renamed from eth0 [ 12.421439] pcieport 0005:06:01.0: Adding to iommu group 55 [ 12.421545] pcieport 0005:06:01.0: enabling device (0000 -> 0003) [ 12.424209] pcieport 0005:06:02.0: Adding to iommu group 55 [ 12.425022] pcieport 0005:06:02.0: enabling device (0000 -> 0003) [ 12.444663] pcieport 0005:06:03.0: Adding to iommu group 55 [ 12.447617] igb 0005:07:00.0: Adding to iommu group 55 [ 12.447784] igb 0005:07:00.0: enabling device (0000 -> 0002) [ 12.452905] iwlwifi 0001:04:00.0 wlP1p4s0: renamed from wlan0 [ 12.484814] pps pps3: new PPS source ptp2 [ 12.484954] igb 0005:07:00.0: added PHC on eth0 [ 12.484996] igb 0005:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.484998] igb 0005:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:a0:10:02:c3:03 [ 12.485093] igb 0005:07:00.0: eth0: PBA No: 000300-000 [ 12.485094] igb 0005:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 12.485345] igb 0005:08:00.0: Adding to iommu group 55 [ 12.485482] igb 0005:08:00.0: enabling device (0000 -> 0002) [ 12.487872] igb 0005:07:00.0 poe3: renamed from eth0 [ 12.490589] Bluetooth: hci0: Waiting for firmware download to complete [ 12.491637] Bluetooth: hci0: Firmware loaded in 1132462 usecs [ 12.491725] Bluetooth: hci0: Waiting for device to boot [ 12.516769] pps pps4: new PPS source ptp3 [ 12.516868] igb 0005:08:00.0: added PHC on eth0 [ 12.516909] igb 0005:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.516910] igb 0005:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:a0:10:02:c3:04 [ 12.517004] igb 0005:08:00.0: eth0: PBA No: 000300-000 [ 12.517006] igb 0005:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 12.517330] irq: IRQ364: trimming hierarchy from :bus@0:pmc@c360000 [ 12.518002] rt5640 8-001c: Device with ID register 0xffff0000 is not rt5640/39 [ 12.519634] Bluetooth: hci0: Device booted in 27296 usecs [ 12.519674] igb 0005:08:00.0 poe4: renamed from eth0 [ 12.523103] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc [ 12.527657] Bluetooth: hci0: Applying Intel DDC parameters completed [ 12.534641] Bluetooth: hci0: Firmware timestamp 2022.5 buildtype 1 build 38020 [ 14.126264] using random self ethernet address [ 14.126271] using random host ethernet address [ 14.235861] nv_nvsciipc_init.sh[949]: found /dev/nvsciipc [ 14.245866] loop8: detected capacity change from 0 to 32768 [ 14.264021] nvsciipc: set_db start [ 14.264047] nvsciipc: set_db done [ 14.361426] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.361436] Bluetooth: BNEP filters: protocol multicast [ 14.361447] Bluetooth: BNEP socket layer initialized [ 14.375103] NET: Registered PF_ALG protocol family [ 14.446397] loop8: detected capacity change from 0 to 8 [ 14.454264] Mass Storage Function, version: 2009/09/11 [ 14.454273] LUN: removable file: (no medium) [ 14.462339] using random self ethernet address [ 14.462347] using random host ethernet address [ 14.625405] nvgpu: 17000000.gpu tpc_pg_mask_store:1116 [INFO] no value change, same mask already set [ 14.631994] pstore: Using crash dump compression: deflate [ 14.632079] printk: console [ramoops-1]: printing thread started [ 14.632096] printk: console [ramoops-1] enabled [ 14.632099] pstore: Registered ramoops as persistent store backend [ 14.632100] ramoops: using 0x200000@0x102cdf0000, ecc: 0 [ 14.865466] nvgpu: 17000000.gpu gk20a_scale_init:541 [INFO] enabled scaling for GPU [ 14.883886] irq: IRQ365: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 14.885132] hwmon hwmon8: temp1_input not attached to any thermal zone [ 15.491224] can: controller area network core [ 15.518572] zram: Added device: zram0 [ 15.518784] zram: Added device: zram1 [ 15.520722] zram: Added device: zram2 [ 15.521001] zram: Added device: zram3 [ 15.521165] zram: Added device: zram4 [ 15.523415] zram: Added device: zram5 [ 15.524468] zram: Added device: zram6 [ 15.525019] zram: Added device: zram7 [ 15.526249] zram: Added device: zram8 [ 15.526638] zram: Added device: zram9 [ 15.526803] zram: Added device: zram10 [ 15.526992] zram: Added device: zram11 [ 15.573897] zram0: detected capacity change from 0 to 5362328 [ 15.668253] Adding 2681160k swap on /dev/zram0. Priority:5 extents:1 across:2681160k SS [ 15.672059] zram1: detected capacity change from 0 to 5362328 [ 15.677872] Adding 2681160k swap on /dev/zram1. Priority:5 extents:1 across:2681160k SS [ 15.681001] zram2: detected capacity change from 0 to 5362328 [ 15.687952] Adding 2681160k swap on /dev/zram2. Priority:5 extents:1 across:2681160k SS [ 15.691179] zram3: detected capacity change from 0 to 5362328 [ 15.697069] Adding 2681160k swap on /dev/zram3. Priority:5 extents:1 across:2681160k SS [ 15.700609] zram4: detected capacity change from 0 to 5362328 [ 15.707664] Adding 2681160k swap on /dev/zram4. Priority:5 extents:1 across:2681160k SS [ 15.711078] zram5: detected capacity change from 0 to 5362328 [ 15.718928] Adding 2681160k swap on /dev/zram5. Priority:5 extents:1 across:2681160k SS [ 15.722651] zram6: detected capacity change from 0 to 5362328 [ 15.728693] Adding 2681160k swap on /dev/zram6. Priority:5 extents:1 across:2681160k SS [ 15.731899] zram7: detected capacity change from 0 to 5362328 [ 15.737873] Adding 2681160k swap on /dev/zram7. Priority:5 extents:1 across:2681160k SS [ 15.741251] zram8: detected capacity change from 0 to 5362328 [ 15.747772] Adding 2681160k swap on /dev/zram8. Priority:5 extents:1 across:2681160k SS [ 15.748467] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.749027] Aquantia AQR113C 6800000.ethernet:00: No AQR phy_mode setting in DT [ 15.749330] NET: Registered PF_CAN protocol family [ 15.751009] zram9: detected capacity change from 0 to 5362328 [ 15.757423] Adding 2681160k swap on /dev/zram9. Priority:5 extents:1 across:2681160k SS [ 15.759165] can: raw protocol [ 15.761076] zram10: detected capacity change from 0 to 5362328 [ 15.767278] Adding 2681160k swap on /dev/zram10. Priority:5 extents:1 across:2681160k SS [ 15.770557] zram11: detected capacity change from 0 to 5362328 [ 15.776713] Adding 2681160k swap on /dev/zram11. Priority:5 extents:1 across:2681160k SS [ 15.826574] sl_max9296 9-0048: sl_max9296_probe: enter [ 15.826635] sl_max9296 9-0048: sl_max9296_parse_dt: Number of declared cameras with this dts 9 [ 15.999082] mdio_bus 2310000.ethernet: phy has invalid PHY address [ 15.999092] mdio_bus 2310000.ethernet: scan phy phy at address 0 [ 15.999185] mdio_bus 2310000.ethernet: scan phy phy at address 1 [ 15.999263] mdio_bus 2310000.ethernet: scan phy phy at address 2 [ 15.999341] mdio_bus 2310000.ethernet: scan phy phy at address 3 [ 15.999418] mdio_bus 2310000.ethernet: scan phy phy at address 4 [ 16.002462] irq: IRQ366: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 16.058530] usb0: HOST MAC 86:6b:b8:b1:9b:9c [ 16.058539] usb0: MAC 86:6b:b8:b1:9b:9d [ 16.059226] usb1: HOST MAC 86:6b:b8:b1:9b:9e [ 16.059232] usb1: MAC 86:6b:b8:b1:9b:9f [ 16.059259] tegra-xudc 3550000.usb: EP 0 (type: ctrl, dir: out) enabled [ 16.086647] l4tbr0: port 1(usb0) entered blocking state [ 16.086663] l4tbr0: port 1(usb0) entered disabled state [ 16.088452] device usb0 entered promiscuous mode [ 16.119833] mttcan c310000.mttcan can0: Bitrate set [ 16.122844] mttcan_controller_config: ctrlmode 0 [ 16.122866] mttcan c310000.mttcan can0: Bitrate set [ 16.124183] l4tbr0: port 2(usb1) entered blocking state [ 16.124201] l4tbr0: port 2(usb1) entered disabled state [ 16.124384] device usb1 entered promiscuous mode [ 16.125925] mttcan c320000.mttcan can1: Bitrate set [ 16.156684] mttcan_controller_config: ctrlmode 0 [ 16.156705] mttcan c320000.mttcan can1: Bitrate set [ 16.161778] loop8: detected capacity change from 0 to 32768 [ 16.276099] sl_max9296 9-0048: sl_max9296_probe_camera: Unknown Camera -1 [ 16.276109] sl_max9296 9-0048: No camera found on gmsl 0 [ 16.440052] ACPI: : failed to evaluate _DSM (0x1001) [ 16.440061] ACPI: : failed to evaluate _DSM (0x1001) [ 16.440063] ACPI: : failed to evaluate _DSM (0x1001) [ 16.440064] ACPI: : failed to evaluate _DSM (0x1001) [ 16.772623] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 16.772656] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready [ 16.848090] sl_max9296 9-0048: zedx camera connected [ 16.888134] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64 540.4.0 Release Build (root@janick-jetPack) Fri 04 Jul 2025 12:48:12 PM CEST [ 16.895469] [drm] [nvidia-drm] [GPU ID 0x00020000] Loading driver [ 17.008082] sl_max9296 9-0048: Configuration success on gmsl 1 [ 17.016594] sl_max9296 9-0048: Link configuration: 2 [ 17.124087] sl_max9296 9-0048: Probe Success ! [ 17.124484] sl_max9296 10-0048: sl_max9296_probe: enter [ 17.124539] sl_max9296 10-0048: sl_max9296_parse_dt: 'sync_mode' not found, assuming master mode [ 17.124541] sl_max9296 10-0048: sl_max9296_parse_dt: Number of declared cameras with this dts 9 [ 17.155759] audit: type=1326 audit(1761231937.152:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2169 comm="cupsd" exe="/snap/cups/1113/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff8b4ace0c code=0x50000 [ 17.278801] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [ 17.297005] [drm] Initialized nvidia-drm 0.0.0 20160202 for 13800000.display on minor 1 [ 17.298209] nv_platform 13800000.display: [drm] Cannot find any crtc or sizes [ 17.584104] sl_max9296 10-0048: sl_max9296_probe_camera: Unknown Camera -1 [ 17.584122] sl_max9296 10-0048: No camera found on gmsl 0 [ 17.640256] audit: type=1326 audit(1761231937.640:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2169 comm="cupsd" exe="/snap/cups/1113/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff8b4ace0c code=0x50000 [ 17.655763] audit: type=1326 audit(1761231937.656:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2220 comm="cups-browsed" exe="/snap/cups/1113/sbin/cups-browsed" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffffab7f5b68 code=0x50000 [ 18.156092] sl_max9296 10-0048: zedx camera connected [ 18.324087] sl_max9296 10-0048: Configuration success on gmsl 1 [ 18.332972] sl_max9296 10-0048: Link configuration: 2 [ 18.444093] sl_max9296 10-0048: Probe Success ! [ 18.444382] sl_max9296 11-0048: sl_max9296_probe: enter [ 18.444450] sl_max9296 11-0048: sl_max9296_parse_dt: 'sync_mode' not found, assuming master mode [ 18.444452] sl_max9296 11-0048: sl_max9296_parse_dt: Number of declared cameras with this dts 9 [ 19.096082] sl_max9296 11-0048: zedx camera connected [ 19.252094] sl_max9296 11-0048: Configuration success on gmsl 0 [ 19.592082] sl_max9296 11-0048: sl_max9296_probe_camera: Unknown Camera -1 [ 19.592094] sl_max9296 11-0048: No camera found on gmsl 1 [ 19.592097] sl_max9296 11-0048: Link configuration: 1 [ 19.700100] sl_max9296 11-0048: Probe Success ! [ 19.700292] sl_max9296 12-0048: sl_max9296_probe: enter [ 19.700364] sl_max9296 12-0048: sl_max9296_parse_dt: 'sync_mode' not found, assuming master mode [ 19.700366] sl_max9296 12-0048: sl_max9296_parse_dt: Number of declared cameras with this dts 9 [ 20.301164] wlP1p4s0: authenticate with d4:24:dd:39:76:40 [ 20.304754] wlP1p4s0: send auth to d4:24:dd:39:76:40 (try 1/3) [ 20.342303] wlP1p4s0: authenticated [ 20.344107] wlP1p4s0: associate with d4:24:dd:39:76:40 (try 1/3) [ 20.350676] wlP1p4s0: RX AssocResp from d4:24:dd:39:76:40 (capab=0x1511 status=0 aid=5) [ 20.355193] wlP1p4s0: associated [ 20.380103] sl_max9296 12-0048: zedx camera connected [ 20.424538] wlP1p4s0: Limiting TX power to 20 (23 - 3) dBm as advertised by d4:24:dd:39:76:40 [ 20.468770] IPv6: ADDRCONF(NETDEV_CHANGE): wlP1p4s0: link becomes ready [ 20.528086] sl_max9296 12-0048: Configuration success on gmsl 0 [ 20.888103] sl_max9296 12-0048: sl_max9296_probe_camera: Unknown Camera -1 [ 20.888116] sl_max9296 12-0048: No camera found on gmsl 1 [ 20.888120] sl_max9296 12-0048: Link configuration: 1 [ 20.974446] rfkill: input handler disabled [ 20.996103] sl_max9296 12-0048: Probe Success ! [ 21.001118] sl_max9295 9-0043: Driver Version : v1.3.0 [ 21.001127] sl_max9295 9-0043: Probing v4l2 sensor. [ 21.036596] sl_max9295 9-0043: probe_serializer: Serializer for zedonegs detect error [ 21.036607] sl_max9295 9-0043: sl_max9295_probe: serializer initialization failed [ 21.036664] sl_max9295: probe of 9-0043 failed with error -1 [ 21.036737] sl_max9295 9-0042: Driver Version : v1.3.0 [ 21.036739] sl_max9295 9-0042: Probing v4l2 sensor. [ 21.076594] sl_max9295 9-0042: probe_serializer: Serializer for zedonegs detect error [ 21.076604] sl_max9295 9-0042: sl_max9295_probe: serializer initialization failed [ 21.076674] sl_max9295: probe of 9-0042 failed with error -1 [ 21.076754] sl_max9295 9-0063: Driver Version : v1.3.0 [ 21.076758] sl_max9295 9-0063: Probing v4l2 sensor. [ 21.300762] sl_max9295 9-0063: probe_serializer: Serializer for zedx detect success [ 21.300949] sl_max9295 9-0062: Driver Version : v1.3.0 [ 21.300952] sl_max9295 9-0062: Probing v4l2 sensor. [ 21.345671] sl_max9295 9-0062: probe_serializer: Serializer for zedx detect error [ 21.345684] sl_max9295 9-0062: sl_max9295_probe: serializer initialization failed [ 21.345756] sl_max9295: probe of 9-0062 failed with error -1 [ 21.345831] sl_max9295 9-0044: Driver Version : v1.3.0 [ 21.345833] sl_max9295 9-0044: Probing v4l2 sensor. [ 21.392566] sl_max9295 9-0044: probe_serializer: Serializer for zedone4k detect error [ 21.392577] sl_max9295 9-0044: sl_max9295_probe: serializer initialization failed [ 21.392666] sl_max9295: probe of 9-0044 failed with error -1 [ 21.392744] sl_max9295 9-0061: Driver Version : v1.3.0 [ 21.392747] sl_max9295 9-0061: Probing v4l2 sensor. [ 21.432577] sl_max9295 9-0061: probe_serializer: Serializer for zedxpro detect error [ 21.432588] sl_max9295 9-0061: sl_max9295_probe: serializer initialization failed [ 21.432665] sl_max9295: probe of 9-0061 failed with error -1 [ 21.432742] sl_max9295 9-0060: Driver Version : v1.3.0 [ 21.432744] sl_max9295 9-0060: Probing v4l2 sensor. [ 21.468660] sl_max9295 9-0060: probe_serializer: Serializer for zedxpro detect error [ 21.468673] sl_max9295 9-0060: sl_max9295_probe: serializer initialization failed [ 21.468743] sl_max9295: probe of 9-0060 failed with error -1 [ 21.468820] sl_max9295 9-0041: Driver Version : v1.3.0 [ 21.468822] sl_max9295 9-0041: Probing v4l2 sensor. [ 21.504725] sl_max9295 9-0041: probe_serializer: Serializer for zedonepro detect error [ 21.504737] sl_max9295 9-0041: sl_max9295_probe: serializer initialization failed [ 21.504798] sl_max9295: probe of 9-0041 failed with error -1 [ 21.504867] sl_max9295 9-0040: Driver Version : v1.3.0 [ 21.504870] sl_max9295 9-0040: Probing v4l2 sensor. [ 21.540960] sl_max9295 9-0040: probe_serializer: Serializer for zedonepro detect error [ 21.540968] sl_max9295 9-0040: sl_max9295_probe: serializer initialization failed [ 21.541017] sl_max9295: probe of 9-0040 failed with error -1 [ 21.541089] sl_max9295 10-0043: Driver Version : v1.3.0 [ 21.541092] sl_max9295 10-0043: Probing v4l2 sensor. [ 21.577465] sl_max9295 10-0043: probe_serializer: Serializer for zedonegs detect error [ 21.577473] sl_max9295 10-0043: sl_max9295_probe: serializer initialization failed [ 21.577523] sl_max9295: probe of 10-0043 failed with error -1 [ 21.577572] sl_max9295 10-0042: Driver Version : v1.3.0 [ 21.577575] sl_max9295 10-0042: Probing v4l2 sensor. [ 21.620811] sl_max9295 10-0042: probe_serializer: Serializer for zedonegs detect error [ 21.620820] sl_max9295 10-0042: sl_max9295_probe: serializer initialization failed [ 21.620873] sl_max9295: probe of 10-0042 failed with error -1 [ 21.620928] sl_max9295 10-0063: Driver Version : v1.3.0 [ 21.620931] sl_max9295 10-0063: Probing v4l2 sensor. [ 21.840903] sl_max9295 10-0063: probe_serializer: Serializer for zedx detect success [ 21.841057] sl_max9295 10-0062: Driver Version : v1.3.0 [ 21.841060] sl_max9295 10-0062: Probing v4l2 sensor. [ 21.876684] sl_max9295 10-0062: probe_serializer: Serializer for zedx detect error [ 21.876694] sl_max9295 10-0062: sl_max9295_probe: serializer initialization failed [ 21.876767] sl_max9295: probe of 10-0062 failed with error -1 [ 21.876845] sl_max9295 10-0044: Driver Version : v1.3.0 [ 21.876848] sl_max9295 10-0044: Probing v4l2 sensor. [ 21.912656] sl_max9295 10-0044: probe_serializer: Serializer for zedone4k detect error [ 21.912667] sl_max9295 10-0044: sl_max9295_probe: serializer initialization failed [ 21.912737] sl_max9295: probe of 10-0044 failed with error -1 [ 21.912816] sl_max9295 10-0061: Driver Version : v1.3.0 [ 21.912818] sl_max9295 10-0061: Probing v4l2 sensor. [ 21.948525] sl_max9295 10-0061: probe_serializer: Serializer for zedxpro detect error [ 21.948537] sl_max9295 10-0061: sl_max9295_probe: serializer initialization failed [ 21.948614] sl_max9295: probe of 10-0061 failed with error -1 [ 21.948695] sl_max9295 10-0060: Driver Version : v1.3.0 [ 21.948698] sl_max9295 10-0060: Probing v4l2 sensor. [ 21.985197] sl_max9295 10-0060: probe_serializer: Serializer for zedxpro detect error [ 21.985209] sl_max9295 10-0060: sl_max9295_probe: serializer initialization failed [ 21.985281] sl_max9295: probe of 10-0060 failed with error -1 [ 21.985358] sl_max9295 10-0041: Driver Version : v1.3.0 [ 21.985362] sl_max9295 10-0041: Probing v4l2 sensor. [ 22.024598] sl_max9295 10-0041: probe_serializer: Serializer for zedonepro detect error [ 22.024610] sl_max9295 10-0041: sl_max9295_probe: serializer initialization failed [ 22.024680] sl_max9295: probe of 10-0041 failed with error -1 [ 22.024772] sl_max9295 10-0040: Driver Version : v1.3.0 [ 22.024775] sl_max9295 10-0040: Probing v4l2 sensor. [ 22.064657] sl_max9295 10-0040: probe_serializer: Serializer for zedonepro detect error [ 22.064668] sl_max9295 10-0040: sl_max9295_probe: serializer initialization failed [ 22.064738] sl_max9295: probe of 10-0040 failed with error -1 [ 22.064849] sl_max9295 11-0043: Driver Version : v1.3.0 [ 22.064851] sl_max9295 11-0043: Probing v4l2 sensor. [ 22.100576] sl_max9295 11-0043: probe_serializer: Serializer for zedonegs detect error [ 22.100588] sl_max9295 11-0043: sl_max9295_probe: serializer initialization failed [ 22.100659] sl_max9295: probe of 11-0043 failed with error -1 [ 22.100732] sl_max9295 11-0042: Driver Version : v1.3.0 [ 22.100734] sl_max9295 11-0042: Probing v4l2 sensor. [ 22.137089] sl_max9295 11-0042: probe_serializer: Serializer for zedonegs detect error [ 22.137099] sl_max9295 11-0042: sl_max9295_probe: serializer initialization failed [ 22.137173] sl_max9295: probe of 11-0042 failed with error -1 [ 22.137248] sl_max9295 11-0063: Driver Version : v1.3.0 [ 22.137251] sl_max9295 11-0063: Probing v4l2 sensor. [ 22.173166] sl_max9295 11-0063: probe_serializer: Serializer for zedx detect error [ 22.173177] sl_max9295 11-0063: sl_max9295_probe: serializer initialization failed [ 22.173250] sl_max9295: probe of 11-0063 failed with error -1 [ 22.173333] sl_max9295 11-0062: Driver Version : v1.3.0 [ 22.173336] sl_max9295 11-0062: Probing v4l2 sensor. [ 22.389352] sl_max9295 11-0062: probe_serializer: Serializer for zedx detect success [ 22.389579] sl_max9295 11-0044: Driver Version : v1.3.0 [ 22.389587] sl_max9295 11-0044: Probing v4l2 sensor. [ 22.428891] sl_max9295 11-0044: probe_serializer: Serializer for zedone4k detect error [ 22.428902] sl_max9295 11-0044: sl_max9295_probe: serializer initialization failed [ 22.428991] sl_max9295: probe of 11-0044 failed with error -1 [ 22.429076] sl_max9295 11-0061: Driver Version : v1.3.0 [ 22.429084] sl_max9295 11-0061: Probing v4l2 sensor. [ 22.465566] sl_max9295 11-0061: probe_serializer: Serializer for zedxpro detect error [ 22.465573] sl_max9295 11-0061: sl_max9295_probe: serializer initialization failed [ 22.465622] sl_max9295: probe of 11-0061 failed with error -1 [ 22.465669] sl_max9295 11-0060: Driver Version : v1.3.0 [ 22.465671] sl_max9295 11-0060: Probing v4l2 sensor. [ 22.509123] sl_max9295 11-0060: probe_serializer: Serializer for zedxpro detect error [ 22.509131] sl_max9295 11-0060: sl_max9295_probe: serializer initialization failed [ 22.509187] sl_max9295: probe of 11-0060 failed with error -1 [ 22.509239] sl_max9295 11-0041: Driver Version : v1.3.0 [ 22.509243] sl_max9295 11-0041: Probing v4l2 sensor. [ 22.548831] sl_max9295 11-0041: probe_serializer: Serializer for zedonepro detect error [ 22.548835] sl_max9295 11-0041: sl_max9295_probe: serializer initialization failed [ 22.548864] sl_max9295: probe of 11-0041 failed with error -1 [ 22.548896] sl_max9295 11-0040: Driver Version : v1.3.0 [ 22.548897] sl_max9295 11-0040: Probing v4l2 sensor. [ 22.585364] sl_max9295 11-0040: probe_serializer: Serializer for zedonepro detect error [ 22.585372] sl_max9295 11-0040: sl_max9295_probe: serializer initialization failed [ 22.585417] sl_max9295: probe of 11-0040 failed with error -1 [ 22.585486] sl_max9295 12-0043: Driver Version : v1.3.0 [ 22.585488] sl_max9295 12-0043: Probing v4l2 sensor. [ 22.621275] sl_max9295 12-0043: probe_serializer: Serializer for zedonegs detect error [ 22.621283] sl_max9295 12-0043: sl_max9295_probe: serializer initialization failed [ 22.621337] sl_max9295: probe of 12-0043 failed with error -1 [ 22.621388] sl_max9295 12-0042: Driver Version : v1.3.0 [ 22.621391] sl_max9295 12-0042: Probing v4l2 sensor. [ 22.661358] sl_max9295 12-0042: probe_serializer: Serializer for zedonegs detect error [ 22.661364] sl_max9295 12-0042: sl_max9295_probe: serializer initialization failed [ 22.661410] sl_max9295: probe of 12-0042 failed with error -1 [ 22.661461] sl_max9295 12-0063: Driver Version : v1.3.0 [ 22.661464] sl_max9295 12-0063: Probing v4l2 sensor. [ 22.705190] sl_max9295 12-0063: probe_serializer: Serializer for zedx detect error [ 22.705197] sl_max9295 12-0063: sl_max9295_probe: serializer initialization failed [ 22.705240] sl_max9295: probe of 12-0063 failed with error -1 [ 22.705280] sl_max9295 12-0062: Driver Version : v1.3.0 [ 22.705282] sl_max9295 12-0062: Probing v4l2 sensor. [ 22.921246] sl_max9295 12-0062: probe_serializer: Serializer for zedx detect success [ 22.921377] sl_max9295 12-0044: Driver Version : v1.3.0 [ 22.921380] sl_max9295 12-0044: Probing v4l2 sensor. [ 22.957482] sl_max9295 12-0044: probe_serializer: Serializer for zedone4k detect error [ 22.957494] sl_max9295 12-0044: sl_max9295_probe: serializer initialization failed [ 22.957587] sl_max9295: probe of 12-0044 failed with error -1 [ 22.957671] sl_max9295 12-0061: Driver Version : v1.3.0 [ 22.957679] sl_max9295 12-0061: Probing v4l2 sensor. [ 22.993385] sl_max9295 12-0061: probe_serializer: Serializer for zedxpro detect error [ 22.993393] sl_max9295 12-0061: sl_max9295_probe: serializer initialization failed [ 22.993456] sl_max9295: probe of 12-0061 failed with error -1 [ 22.993518] sl_max9295 12-0060: Driver Version : v1.3.0 [ 22.993523] sl_max9295 12-0060: Probing v4l2 sensor. [ 23.033384] sl_max9295 12-0060: probe_serializer: Serializer for zedxpro detect error [ 23.033394] sl_max9295 12-0060: sl_max9295_probe: serializer initialization failed [ 23.033468] sl_max9295: probe of 12-0060 failed with error -1 [ 23.033683] sl_max9295 12-0041: Driver Version : v1.3.0 [ 23.033691] sl_max9295 12-0041: Probing v4l2 sensor. [ 23.070831] sl_max9295 12-0041: probe_serializer: Serializer for zedonepro detect error [ 23.070849] sl_max9295 12-0041: sl_max9295_probe: serializer initialization failed [ 23.070943] sl_max9295: probe of 12-0041 failed with error -1 [ 23.071024] sl_max9295 12-0040: Driver Version : v1.3.0 [ 23.071032] sl_max9295 12-0040: Probing v4l2 sensor. [ 23.113650] sl_max9295 12-0040: probe_serializer: Serializer for zedonepro detect error [ 23.113661] sl_max9295 12-0040: sl_max9295_probe: serializer initialization failed [ 23.113728] sl_max9295: probe of 12-0040 failed with error -1 [ 23.124614] zedxpro 9-004f: probing v4l2 sensor. [ 23.124750] zedxpro 9-004f: tegracam sensor driver:video12_v2.0.6 [ 23.125892] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.125913] zedxpro 9-004f: zedxpro_probe: Start streaming fail [ 23.125971] zedxpro 9-004e: probing v4l2 sensor. [ 23.126039] zedxpro 9-004e: tegracam sensor driver:video11_v2.0.6 [ 23.126461] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.126470] zedxpro 9-004e: zedxpro_probe: Start streaming fail [ 23.126503] zedxpro 9-002f: probing v4l2 sensor. [ 23.126568] zedxpro 9-002f: tegracam sensor driver:video10_v2.0.6 [ 23.126959] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.126967] zedxpro 9-002f: zedxpro_probe: Start streaming fail [ 23.126998] zedxpro 9-003f: probing v4l2 sensor. [ 23.127057] zedxpro 9-003f: tegracam sensor driver:video9_v2.0.6 [ 23.128028] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.128042] zedxpro 9-003f: zedxpro_probe: Start streaming fail [ 23.128131] zedxpro 9-002e: probing v4l2 sensor. [ 23.128217] zedxpro 9-002e: tegracam sensor driver:video8_v2.0.6 [ 23.128644] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.128657] zedxpro 9-002e: zedxpro_probe: Start streaming fail [ 23.128742] zedxpro 9-003e: probing v4l2 sensor. [ 23.128812] zedxpro 9-003e: tegracam sensor driver:video7_v2.0.6 [ 23.129203] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.129214] zedxpro 9-003e: zedxpro_probe: Start streaming fail [ 23.129288] zedxpro 10-004f: probing v4l2 sensor. [ 23.129358] zedxpro 10-004f: tegracam sensor driver:video25_v2.0.6 [ 23.130477] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.130487] zedxpro 10-004f: zedxpro_probe: Start streaming fail [ 23.130551] zedxpro 10-004e: probing v4l2 sensor. [ 23.130612] zedxpro 10-004e: tegracam sensor driver:video24_v2.0.6 [ 23.131028] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.131036] zedxpro 10-004e: zedxpro_probe: Start streaming fail [ 23.131067] zedxpro 10-002f: probing v4l2 sensor. [ 23.131111] zedxpro 10-002f: tegracam sensor driver:video23_v2.0.6 [ 23.131516] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.131525] zedxpro 10-002f: zedxpro_probe: Start streaming fail [ 23.131740] zedxpro 10-003f: probing v4l2 sensor. [ 23.131822] zedxpro 10-003f: tegracam sensor driver:video22_v2.0.6 [ 23.132277] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.132291] zedxpro 10-003f: zedxpro_probe: Start streaming fail [ 23.132342] zedxpro 10-002e: probing v4l2 sensor. [ 23.132411] zedxpro 10-002e: tegracam sensor driver:video21_v2.0.6 [ 23.132831] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.132843] zedxpro 10-002e: zedxpro_probe: Start streaming fail [ 23.132886] zedxpro 10-003e: probing v4l2 sensor. [ 23.132951] zedxpro 10-003e: tegracam sensor driver:video20_v2.0.6 [ 23.133358] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.133370] zedxpro 10-003e: zedxpro_probe: Start streaming fail [ 23.133480] zedxpro 11-004f: probing v4l2 sensor. [ 23.133554] zedxpro 11-004f: tegracam sensor driver:video38_v2.0.6 [ 23.134857] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.134868] zedxpro 11-004f: zedxpro_probe: Start streaming fail [ 23.134908] zedxpro 11-004e: probing v4l2 sensor. [ 23.134959] zedxpro 11-004e: tegracam sensor driver:video37_v2.0.6 [ 23.135357] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.135365] zedxpro 11-004e: zedxpro_probe: Start streaming fail [ 23.135397] zedxpro 11-002f: probing v4l2 sensor. [ 23.135479] zedxpro 11-002f: tegracam sensor driver:video36_v2.0.6 [ 23.136092] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.136110] zedxpro 11-002f: zedxpro_probe: Start streaming fail [ 23.136171] zedxpro 11-003f: probing v4l2 sensor. [ 23.136250] zedxpro 11-003f: tegracam sensor driver:video35_v2.0.6 [ 23.136827] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.136840] zedxpro 11-003f: zedxpro_probe: Start streaming fail [ 23.136892] zedxpro 11-002e: probing v4l2 sensor. [ 23.136966] zedxpro 11-002e: tegracam sensor driver:video34_v2.0.6 [ 23.137383] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.137395] zedxpro 11-002e: zedxpro_probe: Start streaming fail [ 23.137442] zedxpro 11-003e: probing v4l2 sensor. [ 23.137513] zedxpro 11-003e: tegracam sensor driver:video33_v2.0.6 [ 23.137916] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.137927] zedxpro 11-003e: zedxpro_probe: Start streaming fail [ 23.138039] zedxpro 12-004f: probing v4l2 sensor. [ 23.138102] zedxpro 12-004f: tegracam sensor driver:video51_v2.0.6 [ 23.139263] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.139273] zedxpro 12-004f: zedxpro_probe: Start streaming fail [ 23.139309] zedxpro 12-004e: probing v4l2 sensor. [ 23.139367] zedxpro 12-004e: tegracam sensor driver:video50_v2.0.6 [ 23.139805] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.139812] zedxpro 12-004e: zedxpro_probe: Start streaming fail [ 23.139870] zedxpro 12-002f: probing v4l2 sensor. [ 23.139913] zedxpro 12-002f: tegracam sensor driver:video49_v2.0.6 [ 23.140299] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.140308] zedxpro 12-002f: zedxpro_probe: Start streaming fail [ 23.140340] zedxpro 12-003f: probing v4l2 sensor. [ 23.140390] zedxpro 12-003f: tegracam sensor driver:video48_v2.0.6 [ 23.141312] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.141328] zedxpro 12-003f: zedxpro_probe: Start streaming fail [ 23.141427] zedxpro 12-002e: probing v4l2 sensor. [ 23.141500] zedxpro 12-002e: tegracam sensor driver:video47_v2.0.6 [ 23.141910] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.141922] zedxpro 12-002e: zedxpro_probe: Start streaming fail [ 23.141969] zedxpro 12-003e: probing v4l2 sensor. [ 23.142050] zedxpro 12-003e: tegracam sensor driver:video46_v2.0.6 [ 23.142449] regmap_util_write_table_8:regmap_util_write_table:-121 [ 23.142462] zedxpro 12-003e: zedxpro_probe: Start streaming fail [ 23.151032] zedx 9-0011: Driver Version : v1.3.0 [ 23.151037] zedx 9-0011: Probing v4l2 sensor. [ 23.151194] zedx 9-0011: tegracam sensor driver:video5_v2.0.6 [ 23.204711] zedx 9-0011: ZED-X detect error [ 23.204772] zedx 9-0011: zedx_probe: ar0234 initialization failed [ 23.204841] zedx: probe of 9-0011 failed with error -1 [ 23.204917] zedx 9-0010: Driver Version : v1.3.0 [ 23.204921] zedx 9-0010: Probing v4l2 sensor. [ 23.205106] zedx 9-0010: tegracam sensor driver:video4_v2.0.6 [ 23.253511] zedx 9-0010: ZED-X detect error [ 23.253563] zedx 9-0010: zedx_probe: ar0234 initialization failed [ 23.253638] zedx: probe of 9-0010 failed with error -1 [ 23.253714] zedx 9-0031: Driver Version : v1.3.0 [ 23.253719] zedx 9-0031: Probing v4l2 sensor. [ 23.253927] zedx 9-0031: tegracam sensor driver:video3_v2.0.6 [ 23.340108] zedx 9-0031: Enable gmsl for channel 0 and id 1 [ 23.581358] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0031 bound [ 23.645871] zedx 9-0031: Detected ZED-X sensor [ 23.645881] zedx 9-0031: zedx_probe: Serial Number : 45858818 [ 23.645884] zedx 9-0031: zedx_probe: CHANNEL: 0 ID: 1 [ 23.645906] Video device name is video0 [ 23.645910] Video device ID is 0 [ 23.651243] zedx 9-0039: Driver Version : v1.3.0 [ 23.651250] zedx 9-0039: Probing v4l2 sensor. [ 23.651657] zedx 9-0039: tegracam sensor driver:video2_v2.0.6 [ 23.736125] zedx 9-0039: Enable gmsl for channel 0 and id 1 [ 23.974187] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0039 bound [ 23.975318] zedx 9-0039: Detected ZED-X sensor [ 23.975324] zedx 9-0039: zedx_probe: Serial Number : 45858818 [ 23.975328] zedx 9-0039: zedx_probe: CHANNEL: 0 ID: 1 [ 23.975349] Video device name is video1 [ 23.975354] Video device ID is 1 [ 23.975877] zedx 9-0030: Driver Version : v1.3.0 [ 23.975882] zedx 9-0030: Probing v4l2 sensor. [ 23.976183] zedx 9-0030: tegracam sensor driver:video1_v2.0.6 [ 24.029025] zedx 9-0030: ZED-X detect error [ 24.029090] zedx 9-0030: zedx_probe: ar0234 initialization failed [ 24.029176] zedx: probe of 9-0030 failed with error -1 [ 24.029275] zedx 9-0038: Driver Version : v1.3.0 [ 24.029280] zedx 9-0038: Probing v4l2 sensor. [ 24.029504] zedx 9-0038: tegracam sensor driver:video0_v2.0.6 [ 24.077117] zedx 9-0038: ZED-X detect error [ 24.077174] zedx 9-0038: zedx_probe: ar0234 initialization failed [ 24.077245] zedx: probe of 9-0038 failed with error -1 [ 24.077357] zedx 10-0011: Driver Version : v1.3.0 [ 24.077361] zedx 10-0011: Probing v4l2 sensor. [ 24.077579] zedx 10-0011: tegracam sensor driver:video18_v2.0.6 [ 24.128989] zedx 10-0011: ZED-X detect error [ 24.129061] zedx 10-0011: zedx_probe: ar0234 initialization failed [ 24.129145] zedx: probe of 10-0011 failed with error -1 [ 24.129250] zedx 10-0010: Driver Version : v1.3.0 [ 24.129256] zedx 10-0010: Probing v4l2 sensor. [ 24.129502] zedx 10-0010: tegracam sensor driver:video17_v2.0.6 [ 24.177173] zedx 10-0010: ZED-X detect error [ 24.177233] zedx 10-0010: zedx_probe: ar0234 initialization failed [ 24.177327] zedx: probe of 10-0010 failed with error -1 [ 24.177420] zedx 10-0031: Driver Version : v1.3.0 [ 24.177424] zedx 10-0031: Probing v4l2 sensor. [ 24.177639] zedx 10-0031: tegracam sensor driver:video16_v2.0.6 [ 24.264105] zedx 10-0031: Enable gmsl for channel 1 and id 10 [ 24.501922] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 10-0031 bound [ 24.503107] zedx 10-0031: Detected ZED-X sensor [ 24.503113] zedx 10-0031: zedx_probe: Serial Number : 49088804 [ 24.503117] zedx 10-0031: zedx_probe: CHANNEL: 1 ID: 10 [ 24.503135] Video device name is video2 [ 24.503141] Video device ID is 2 [ 24.503609] zedx 10-0039: Driver Version : v1.3.0 [ 24.503614] zedx 10-0039: Probing v4l2 sensor. [ 24.503855] zedx 10-0039: tegracam sensor driver:video15_v2.0.6 [ 24.592100] zedx 10-0039: Enable gmsl for channel 1 and id 10 [ 24.828642] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 10-0039 bound [ 24.830005] zedx 10-0039: Detected ZED-X sensor [ 24.830012] zedx 10-0039: zedx_probe: Serial Number : 49088804 [ 24.830013] zedx 10-0039: zedx_probe: CHANNEL: 1 ID: 10 [ 24.830029] Video device name is video3 [ 24.830032] Video device ID is 3 [ 24.830231] zedx 10-0030: Driver Version : v1.3.0 [ 24.830233] zedx 10-0030: Probing v4l2 sensor. [ 24.830376] zedx 10-0030: tegracam sensor driver:video14_v2.0.6 [ 24.885300] zedx 10-0030: ZED-X detect error [ 24.885351] zedx 10-0030: zedx_probe: ar0234 initialization failed [ 24.885406] zedx: probe of 10-0030 failed with error -1 [ 24.885477] zedx 10-0038: Driver Version : v1.3.0 [ 24.885479] zedx 10-0038: Probing v4l2 sensor. [ 24.885627] zedx 10-0038: tegracam sensor driver:video13_v2.0.6 [ 24.945102] zedx 10-0038: ZED-X detect error [ 24.945149] zedx 10-0038: zedx_probe: ar0234 initialization failed [ 24.945209] zedx: probe of 10-0038 failed with error -1 [ 24.945310] zedx 11-0011: Driver Version : v1.3.0 [ 24.945313] zedx 11-0011: Probing v4l2 sensor. [ 24.945463] zedx 11-0011: tegracam sensor driver:video31_v2.0.6 [ 24.997826] zedx 11-0011: ZED-X detect error [ 24.997874] zedx 11-0011: zedx_probe: ar0234 initialization failed [ 24.997940] zedx: probe of 11-0011 failed with error -1 [ 24.998020] zedx 11-0010: Driver Version : v1.3.0 [ 24.998023] zedx 11-0010: Probing v4l2 sensor. [ 24.998184] zedx 11-0010: tegracam sensor driver:video30_v2.0.6 [ 25.065062] zedx 11-0010: ZED-X detect error [ 25.065109] zedx 11-0010: zedx_probe: ar0234 initialization failed [ 25.065174] zedx: probe of 11-0010 failed with error -1 [ 25.065251] zedx 11-0031: Driver Version : v1.3.0 [ 25.065254] zedx 11-0031: Probing v4l2 sensor. [ 25.065410] zedx 11-0031: tegracam sensor driver:video29_v2.0.6 [ 25.117848] zedx 11-0031: ZED-X detect error [ 25.117896] zedx 11-0031: zedx_probe: ar0234 initialization failed [ 25.117954] zedx: probe of 11-0031 failed with error -1 [ 25.118031] zedx 11-0039: Driver Version : v1.3.0 [ 25.118033] zedx 11-0039: Probing v4l2 sensor. [ 25.118169] zedx 11-0039: tegracam sensor driver:video28_v2.0.6 [ 25.165479] zedx 11-0039: ZED-X detect error [ 25.165538] zedx 11-0039: zedx_probe: ar0234 initialization failed [ 25.165619] zedx: probe of 11-0039 failed with error -1 [ 25.165720] zedx 11-0030: Driver Version : v1.3.0 [ 25.165725] zedx 11-0030: Probing v4l2 sensor. [ 25.165937] zedx 11-0030: tegracam sensor driver:video27_v2.0.6 [ 25.256090] zedx 11-0030: Enable gmsl for channel 2 and id 18 [ 25.497008] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 11-0030 bound [ 25.497949] zedx 11-0030: Detected ZED-X sensor [ 25.497953] zedx 11-0030: zedx_probe: Serial Number : 55521425 [ 25.497955] zedx 11-0030: zedx_probe: CHANNEL: 2 ID: 18 [ 25.497970] Video device name is video4 [ 25.497974] Video device ID is 4 [ 25.498170] zedx 11-0038: Driver Version : v1.3.0 [ 25.498173] zedx 11-0038: Probing v4l2 sensor. [ 25.498313] zedx 11-0038: tegracam sensor driver:video26_v2.0.6 [ 25.588094] zedx 11-0038: Enable gmsl for channel 2 and id 18 [ 25.829063] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 11-0038 bound [ 25.829939] zedx 11-0038: Detected ZED-X sensor [ 25.829943] zedx 11-0038: zedx_probe: Serial Number : 55521425 [ 25.829945] zedx 11-0038: zedx_probe: CHANNEL: 2 ID: 18 [ 25.829960] Video device name is video5 [ 25.829964] Video device ID is 5 [ 25.830408] zedx 12-0011: Driver Version : v1.3.0 [ 25.830411] zedx 12-0011: Probing v4l2 sensor. [ 25.830720] zedx 12-0011: tegracam sensor driver:video44_v2.0.6 [ 25.889414] zedx 12-0011: ZED-X detect error [ 25.889478] zedx 12-0011: zedx_probe: ar0234 initialization failed [ 25.889566] zedx: probe of 12-0011 failed with error -1 [ 25.889659] zedx 12-0010: Driver Version : v1.3.0 [ 25.889663] zedx 12-0010: Probing v4l2 sensor. [ 25.889879] zedx 12-0010: tegracam sensor driver:video43_v2.0.6 [ 25.936990] zedx 12-0010: ZED-X detect error [ 25.937037] zedx 12-0010: zedx_probe: ar0234 initialization failed [ 25.937099] zedx: probe of 12-0010 failed with error -1 [ 25.937180] zedx 12-0031: Driver Version : v1.3.0 [ 25.937183] zedx 12-0031: Probing v4l2 sensor. [ 25.937350] zedx 12-0031: tegracam sensor driver:video42_v2.0.6 [ 25.993246] zedx 12-0031: ZED-X detect error [ 25.993293] zedx 12-0031: zedx_probe: ar0234 initialization failed [ 25.993356] zedx: probe of 12-0031 failed with error -1 [ 25.993436] zedx 12-0039: Driver Version : v1.3.0 [ 25.993438] zedx 12-0039: Probing v4l2 sensor. [ 25.993583] zedx 12-0039: tegracam sensor driver:video41_v2.0.6 [ 26.044548] zedx 12-0039: ZED-X detect error [ 26.044592] zedx 12-0039: zedx_probe: ar0234 initialization failed [ 26.044650] zedx: probe of 12-0039 failed with error -1 [ 26.044723] zedx 12-0030: Driver Version : v1.3.0 [ 26.044725] zedx 12-0030: Probing v4l2 sensor. [ 26.044852] zedx 12-0030: tegracam sensor driver:video40_v2.0.6 [ 26.136106] zedx 12-0030: Enable gmsl for channel 3 and id 27 [ 26.381491] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 12-0030 bound [ 26.382226] zedx 12-0030: Detected ZED-X sensor [ 26.382229] zedx 12-0030: zedx_probe: Serial Number : 59756691 [ 26.382231] zedx 12-0030: zedx_probe: CHANNEL: 3 ID: 27 [ 26.382244] Video device name is video6 [ 26.382248] Video device ID is 6 [ 26.382508] zedx 12-0038: Driver Version : v1.3.0 [ 26.382511] zedx 12-0038: Probing v4l2 sensor. [ 26.382646] zedx 12-0038: tegracam sensor driver:video39_v2.0.6 [ 26.472105] zedx 12-0038: Enable gmsl for channel 3 and id 27 [ 26.709542] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 12-0038 bound [ 26.710259] zedx 12-0038: Detected ZED-X sensor [ 26.710262] zedx 12-0038: zedx_probe: Serial Number : 59756691 [ 26.710263] zedx 12-0038: zedx_probe: CHANNEL: 3 ID: 27 [ 26.710276] Video device name is video7 [ 26.710280] Video device ID is 7 [ 26.718828] zedxone_uhd 9-001a: tegracam sensor driver:video6_v2.0.6 [ 27.251869] zedxone_uhd 9-001a: imx678_probe: ZED One UHD detection error [ 27.251923] zedxone_uhd: probe of 9-001a failed with error -1 [ 27.252341] zedxone_uhd 10-001a: tegracam sensor driver:video19_v2.0.6 [ 27.800089] zedxone_uhd 10-001a: imx678_probe: ZED One UHD detection error [ 27.800142] zedxone_uhd: probe of 10-001a failed with error -1 [ 27.800397] zedxone_uhd 11-001a: tegracam sensor driver:video32_v2.0.6 [ 28.274605] pwm-tegra-tachometer 39c0000.tachometer: Tachometer Overflow is detected [ 28.341228] zedxone_uhd 11-001a: imx678_probe: ZED-X One UHD detect error [ 28.341282] zedxone_uhd: probe of 11-001a failed with error -1 [ 28.341530] zedxone_uhd 12-001a: tegracam sensor driver:video45_v2.0.6 [ 28.885060] zedxone_uhd 12-001a: imx678_probe: ZED-X One UHD detect error [ 28.885111] zedxone_uhd: probe of 12-001a failed with error -1 [ 382.020503] usb 1-2: new full-speed USB device number 4 using tegra-xusb [ 382.180243] input: Logitech USB Receiver as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input5 [ 382.241859] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.usb-2/input0 [ 382.246272] input: Logitech USB Receiver Mouse as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input6 [ 382.246485] input: Logitech USB Receiver Consumer Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input7 [ 382.304446] input: Logitech USB Receiver System Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input8 [ 382.304619] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.usb-2/input1 [ 448.166362] zedx 9-0039: Error writing mode [ 448.214506] zedx 9-0031: Error writing mode [ 449.446297] zedx 9-0039: Error writing mode [ 449.494629] zedx 9-0031: Error writing mode [ 449.507931] zedx 9-0031: zedx_set_gain: GAIN control error [ 449.554076] zedx 9-0031: Error writing mode [ 449.555483] zedx 9-0031: zedx_set_gain: GAIN control error [ 449.602576] zedx 9-0031: Error writing mode [ 449.619893] zedx 9-0031: zedx_set_gain: GAIN control error [ 449.666575] zedx 9-0031: Error writing mode [ 449.714409] zedx 9-0031: Error writing mode [ 449.719876] zedx 9-0039: zedx_set_gain: GAIN control error [ 449.766395] zedx 9-0039: Error writing mode [ 449.767086] zedx 9-0039: zedx_set_gain: GAIN control error [ 449.814418] zedx 9-0039: Error writing mode [ 449.831880] zedx 9-0039: zedx_set_gain: GAIN control error [ 449.882566] zedx 9-0039: Error writing mode [ 449.930199] zedx 9-0039: Error writing mode [ 488.963089] zedx 9-0039: Error writing mode [ 489.010877] zedx 9-0031: Error writing mode [ 489.029841] zedx 9-0039: zedx_set_gain: GAIN control error [ 489.079001] zedx 9-0039: Error writing mode [ 489.135011] zedx 9-0039: Error writing mode [ 489.152601] zedx 9-0039: zedx_set_gain: GAIN control error [ 489.203026] zedx 9-0039: Error writing mode [ 489.251037] zedx 9-0039: Error writing mode [ 489.256694] zedx 9-0031: zedx_set_gain: GAIN control error [ 489.306826] zedx 9-0031: Error writing mode [ 489.354873] zedx 9-0031: Error writing mode [ 489.372284] zedx 9-0031: zedx_set_gain: GAIN control error [ 489.419065] zedx 9-0031: Error writing mode [ 489.466974] zedx 9-0031: Error writing mode