# \#ros

**URL:** https://community.stereolabs.com/tag/ros/3.md

[Latest](https://community.stereolabs.com/latest.md) · [Categories](https://community.stereolabs.com/categories.md) · [Tags](https://community.stereolabs.com/tags.md)

---

## [Cameras do not stream video](https://community.stereolabs.com/t/cameras-do-not-stream-video/11772)

<div class="topic-metadata">

**Author:** [@SirMichcik](https://community.stereolabs.com/u/SirMichcik)\
**Replies:** 8\
**Last updated:** [October 12, 2026, 11:27am UTC](https://community.stereolabs.com/t/cameras-do-not-stream-video/11772 "2026-10-12T11:27:29Z")

</div>

Hi, I’m having trouble getting two Stereolabs ZED XOne GS cameras working on a Jetson. System: Jetson Orin JetPack 6.2.1 L4T 36.4.4 Linux kernel 5.15.148 CUDA 12.6 TensorRT 10.3.0 cuDNN 9.3.0.75 …

---

## ["no CUDA-capable device is detected" error](https://community.stereolabs.com/t/no-cuda-capable-device-is-detected-error/11735)

<div class="topic-metadata">

**Author:** [@paulm](https://community.stereolabs.com/u/paulm)\
**Replies:** 2\
**Last updated:** [September 29, 2026, 8:56am UTC](https://community.stereolabs.com/t/no-cuda-capable-device-is-detected-error/11735 "2026-09-29T08:56:59Z")

</div>

Hello, I am facing the following error when launching the zed\_isaac\_ros\_april\_tag example : \[ERROR\] \[launch\_ros.actions.load\_composable\_nodes\]: Failed to load node 'zed\_image\_converter' of type 'nvidia::isaac\_ros::imag…

---

## [Weird frame rate behavior on GMSL Zed X Mini with AGX Orin](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728)

<div class="topic-metadata">

**Author:** [@Fedezac](https://community.stereolabs.com/u/Fedezac)\
**Replies:** 6\
**Last updated:** [September 28, 2026, 12:38pm UTC](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728 "2026-09-28T12:38:40Z")

</div>

Hello there, we have been having some issues with the framerate of Zed Mini cameras. Our setup is as follows: Jetson AGX Orin board (Jetpack R36.5, ZED sdk 5.4.1), ZED Quad capture card (driver 1.4.3.), 2x ZED X Mini co…

---

## [CUDA illegal memory allocation error when setting ROI](https://community.stereolabs.com/t/cuda-illegal-memory-allocation-error-when-setting-roi/11440)

<div class="topic-metadata">

**Author:** [@withcargocam](https://community.stereolabs.com/u/withcargocam)\
**Replies:** 7\
**Last updated:** [July 20, 2026, 9:07pm UTC](https://community.stereolabs.com/t/cuda-illegal-memory-allocation-error-when-setting-roi/11440 "2026-07-20T21:07:11Z")

</div>

System Description: NVIDIA AGX Orin 64GB Dev kit L4T36.5 ZED SDK version 5.2.3 Latest version of ZED ROS2 wrapper. ZEDX GMSL2 camera. Error Logs: \[component\_container\_isolated-1\] \[INFO\] \[1781571316.819200787\] \[zed.…

---

## [Zed X mini cameras not detected in ISAAC ROS](https://community.stereolabs.com/t/zed-x-mini-cameras-not-detected-in-isaac-ros/11473)

<div class="topic-metadata">

**Author:** [@sirish08](https://community.stereolabs.com/u/sirish08)\
**Replies:** 1\
**Last updated:** [June 26, 2026, 1:30pm UTC](https://community.stereolabs.com/t/zed-x-mini-cameras-not-detected-in-isaac-ros/11473 "2026-06-26T13:30:06Z")

</div>

I am running multiple ZED cameras in Isaac ROS using the zed\_multi\_camera launch file example provided in the ZED ROS 2 Examples repository on a Jetson AGX Orin equipped with a ZED Link Capture Card Quad. My setup uses G…

---

## [Jetson Orin nano with another Pc and Zed wrapper](https://community.stereolabs.com/t/jetson-orin-nano-with-another-pc-and-zed-wrapper/11144)

<div class="topic-metadata">

**Author:** [@Abdelrahman-Ashraf18](https://community.stereolabs.com/u/Abdelrahman-Ashraf18)\
**Replies:** 4\
**Last updated:** [April 13, 2026, 12:50pm UTC](https://community.stereolabs.com/t/jetson-orin-nano-with-another-pc-and-zed-wrapper/11144 "2026-04-13T12:50:15Z")

</div>

Hello We are an ROV team using Zed2i camera and Jetson Orin nano super 8gb with Ethernet cable Cat6 which connected to Laptop We are using Zed Ros2 wrapper and Ros2 Humble and setting up Cyclone DDS as Stereolabs docume…

---

## [ZED SDK 5.1.2 performing worse than 5.0.5](https://community.stereolabs.com/t/zed-sdk-5-1-2-performing-worse-than-5-0-5/10765)

<div class="topic-metadata">

**Author:** [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Replies:** 33\
**Last updated:** [March 16, 2026, 4:22pm UTC](https://community.stereolabs.com/t/zed-sdk-5-1-2-performing-worse-than-5-0-5/10765 "2026-03-16T16:22:51Z")

</div>

Hi, I have been using 5.0.5 for a while with my JetsonOrin NX Jetpack 6.2 and Zed 2i, and it has been working okay with some issues. I updated the SDK to 5.1.2, and it is performing worse. I have attached the params for…

---

## [ZED position tracking 2D mode constraint](https://community.stereolabs.com/t/zed-position-tracking-2d-mode-constraint/10794)

<div class="topic-metadata">

**Author:** [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Replies:** 6\
**Last updated:** [March 5, 2026, 11:37pm UTC](https://community.stereolabs.com/t/zed-position-tracking-2d-mode-constraint/10794 "2026-03-05T23:37:18Z")

</div>

Hi, I have been testing SDK 5.2 with my ZED2i and Jetson Orin NX. I enabled 3D landmark visualization and noticed that even when 2D mode is enabled, the 3D landmarks still show accumulated roll and pitch error, as shown…

---

## [ROS2 ZED Wrapper Stream Client](https://community.stereolabs.com/t/ros2-zed-wrapper-stream-client/10469)

<div class="topic-metadata">

**Author:** [@MM10](https://community.stereolabs.com/u/MM10)\
**Replies:** 7\
**Last updated:** [February 27, 2026, 6:06pm UTC](https://community.stereolabs.com/t/ros2-zed-wrapper-stream-client/10469 "2026-02-27T18:06:42Z")

</div>

Is it possible to have the ZED ROS2 Wrapper accept a camera stream from a remote Device? Or do i need to send my ROS Topics over the network connection? Currently Running the SDK 5.1.1 with ROS2 Humble on a Jetson Orin…

---

## [Position Tracking feature count](https://community.stereolabs.com/t/position-tracking-feature-count/10805)

<div class="topic-metadata">

**Author:** [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Replies:** 19\
**Last updated:** [February 23, 2026, 5:03pm UTC](https://community.stereolabs.com/t/position-tracking-feature-count/10805 "2026-02-23T17:03:42Z")

</div>

Hi, I was wondering if there’s a way to get the “number of features“ currently tracked by the feature tracker of the position tracker? That way, I can reset the position tracker when there are fewer features without acc…

---

## [Zed publish\_pose\_cov not creating pose\_with\_covariance topic](https://community.stereolabs.com/t/zed-publish-pose-cov-not-creating-pose-with-covariance-topic/10751)

<div class="topic-metadata">

**Author:** [@rishikandimalla](https://community.stereolabs.com/u/rishikandimalla)\
**Replies:** 1\
**Last updated:** [February 5, 2026, 5:06pm UTC](https://community.stereolabs.com/t/zed-publish-pose-cov-not-creating-pose-with-covariance-topic/10751 "2026-02-05T17:06:55Z")

</div>

Hi, I am trying to publish a pose\_with\_covariance to use with an EKF node. I set the publish\_pose\_cov option to true but no topic for pose with covariance shows up I tried spatial\_memory := true I also tried setting i…

---

## [ZED Camera Launch (ZED2i and ZEDXOneGS) - Component degraded, and USB camera crashing every few days](https://community.stereolabs.com/t/zed-camera-launch-zed2i-and-zedxonegs-component-degraded-and-usb-camera-crashing-every-few-days/10678)

<div class="topic-metadata">

**Author:** [@Jumana](https://community.stereolabs.com/u/Jumana)\
**Replies:** 5\
**Last updated:** [January 29, 2026, 11:13am UTC](https://community.stereolabs.com/t/zed-camera-launch-zed2i-and-zedxonegs-component-degraded-and-usb-camera-crashing-every-few-days/10678 "2026-01-29T11:13:15Z")

</div>

I am seeing the following error when launching mono/stereocameras through ROS2: \[component\_container\_isolated-2\] \[2026-01-22 22:27:48 UTC\]\[ZED\]\[WARNING\] Frames may be corrupted or degraded \[component\_container\_isolated…

---

## [zed multi camera launch bug](https://community.stereolabs.com/t/zed-multi-camera-launch-bug/10565)

<div class="topic-metadata">

**Author:** [@Gal](https://community.stereolabs.com/u/Gal)\
**Replies:** 3\
**Last updated:** [December 29, 2025, 5:07pm UTC](https://community.stereolabs.com/t/zed-multi-camera-launch-bug/10565 "2025-12-29T17:07:42Z")

</div>

i downloaded the zed-ros2-examples and when trying to run the zed\_multi\_camera launch i get ros2 launch zed\_multi\_camera zed\_multi\_camera.launch.py \\ cam\_names:=‘\[zed\_left,zed\_right\]’ cam\_models:=‘\[zed2i,zed2i\]’ cam…

---

## [ZED2i Odometry Drifts Significantly in Open Areas — Is This Due to Lack of Features or Configuration Issues?](https://community.stereolabs.com/t/zed2i-odometry-drifts-significantly-in-open-areas-is-this-due-to-lack-of-features-or-configuration-issues/10521)

<div class="topic-metadata">

**Author:** [@kruthik](https://community.stereolabs.com/u/kruthik)\
**Replies:** 2\
**Last updated:** [December 29, 2025, 11:25am UTC](https://community.stereolabs.com/t/zed2i-odometry-drifts-significantly-in-open-areas-is-this-due-to-lack-of-features-or-configuration-issues/10521 "2025-12-29T11:25:08Z")

</div>

Hello everyone, I am using a ZED2i camera for odometry on my mobile robot, running with zed\_wrapper and ZED SDK 5.0. I am intentionally staying on SDK 5.0 because I get faster depth and RGB streams compared to newer ver…

---

## [Issac\_Ros\_zed\_wrapper\_getting\_killed](https://community.stereolabs.com/t/issac-ros-zed-wrapper-getting-killed/10476)

<div class="topic-metadata">

**Author:** [@anish\_mathew\_oommen](https://community.stereolabs.com/u/anish_mathew_oommen)\
**Replies:** 1\
**Last updated:** [December 9, 2025, 5:02pm UTC](https://community.stereolabs.com/t/issac-ros-zed-wrapper-getting-killed/10476 "2025-12-09T17:02:46Z")

</div>

I am launching like ros2 launch zed\_wrapper zed\_camera.launch.py camera\_model:=zed2i camera\_name:=zed2i enable\_ipc:=false publish\_urdf:=true publish\_tf:=false publish\_map\_tf:=false publish\_imu\_tf:=false Getting below e…

---

## [Isaac Ros no Data available](https://community.stereolabs.com/t/isaac-ros-no-data-available/10398)

<div class="topic-metadata">

**Author:** [@becketps](https://community.stereolabs.com/u/becketps)\
**Replies:** 0\
**Last updated:** [November 24, 2025, 12:07am UTC](https://community.stereolabs.com/t/isaac-ros-no-data-available/10398 "2025-11-24T00:07:32Z")

</div>

Dear Support I hope that you can help me. After fighting through this description: Setting up Isaac™ ROS to work with ZED Cameras in ROS 2 - Stereolabs There something is mentioned with Authorization required… To keep…

---

## [Specular Lighting Causing Systematic Stereo Depth Bias / Drift](https://community.stereolabs.com/t/specular-lighting-causing-systematic-stereo-depth-bias-drift/10371)

<div class="topic-metadata">

**Author:** [@mohamedsamirx](https://community.stereolabs.com/u/mohamedsamirx)\
**Replies:** 1\
**Last updated:** [November 21, 2025, 2:14pm UTC](https://community.stereolabs.com/t/specular-lighting-causing-systematic-stereo-depth-bias-drift/10371 "2025-11-21T14:14:04Z")

</div>

I am using two ZED X cameras in a dual-stereo outdoor setup. Both sensors are fully calibrated, and I am running Neural Depth mode. In deployments, I encounter major issues under strong sunlight (morning harsh reflectio…

---

## [Synchronization of two ZEDX cameras](https://community.stereolabs.com/t/synchronization-of-two-zedx-cameras/10362)

<div class="topic-metadata">

**Author:** [@Giorgos](https://community.stereolabs.com/u/Giorgos)\
**Replies:** 6\
**Last updated:** [November 19, 2025, 2:37pm UTC](https://community.stereolabs.com/t/synchronization-of-two-zedx-cameras/10362 "2025-11-19T14:37:49Z")

</div>

Dear support, I am working on a ros2 application in which I launch both Nvidia’s ESSDisparityNode and zed\_isaac\_ros\_multi\_camera from the zed-ros2-examples package you have provided. I have 2x ZEDX cameras connected to …

---

## [Async\_image\_retrieval problem?](https://community.stereolabs.com/t/async-image-retrieval-problem/10365)

<div class="topic-metadata">

**Author:** [@HMX2013](https://community.stereolabs.com/u/HMX2013)\
**Replies:** 1\
**Last updated:** [November 19, 2025, 2:22pm UTC](https://community.stereolabs.com/t/async-image-retrieval-problem/10365 "2025-11-19T14:22:37Z")

</div>

Hello, my camera is ZED X mounted on AGX Orin (ZED SDK: 5.1.1). I want to record the camera’s data in SVO2 and perform object detection at the same time. But there exists an FPS drop. I want to ensure the camera’s recor…

---

## [ZED2 Calibration for underwater application](https://community.stereolabs.com/t/zed2-calibration-for-underwater-application/10322)

<div class="topic-metadata">

**Author:** [@alebenna](https://community.stereolabs.com/u/alebenna)\
**Replies:** 4\
**Last updated:** [November 14, 2025, 4:22pm UTC](https://community.stereolabs.com/t/zed2-calibration-for-underwater-application/10322 "2025-11-14T16:22:25Z")

</div>

Hi, I wanted to use my ZED2 camera to perform 3D reconstruction in underwater environments. To do this, I need to recalibrate my camera and can’t use the ZED Calibration tool, but I was thinking of using images taken wit…

---

## [Jetson Orin ZED X One gmsl2 cannot detect ](https://community.stereolabs.com/t/jetson-orin-zed-x-one-gmsl2-cannot-detect/10245)

<div class="topic-metadata">

**Author:** [@Harin](https://community.stereolabs.com/u/Harin)\
**Replies:** 1\
**Last updated:** [November 4, 2025, 6:49pm UTC](https://community.stereolabs.com/t/jetson-orin-zed-x-one-gmsl2-cannot-detect/10245 "2025-11-04T18:49:27Z")

</div>

Our environments are like below. Jetson Orin developer kit Ubuntu 22.04 + Cuda 12.6 Link duo capture card Jetpack 36.4.0 We flashed 36.4.0 version on Jetson orin devkit, and we intsalled zed x drivers 1.3.2 versio (ht…

---

## [Build Error in zed\_components with ZED SDK 5.0.7 (Jetson Orin + ROS 2 Humble)](https://community.stereolabs.com/t/build-error-in-zed-components-with-zed-sdk-5-0-7-jetson-orin-ros-2-humble/10236)

<div class="topic-metadata">

**Author:** [@vansh\_agg](https://community.stereolabs.com/u/vansh_agg)\
**Replies:** 1\
**Last updated:** [October 29, 2025, 12:53pm UTC](https://community.stereolabs.com/t/build-error-in-zed-components-with-zed-sdk-5-0-7-jetson-orin-ros-2-humble/10236 "2025-10-29T12:53:12Z")

</div>

System Details: Platform: Jetson Orin NX (JetPack 6 / Ubuntu 22.04) ZED SDK Version: 5.0.7 (ARM64 Tegra) ROS 2 Distro: Humble Wrapper Version: Latest master and also tried ros2\_humble branch from zed-ros2-wra…

---

## [Zed-ros2-wrapper - Nitros support](https://community.stereolabs.com/t/zed-ros2-wrapper-nitros-support/9540)

<div class="topic-metadata">

**Author:** [@Sebastian](https://community.stereolabs.com/u/Sebastian)\
**Replies:** 9\
**Last updated:** [October 24, 2025, 10:18am UTC](https://community.stereolabs.com/t/zed-ros2-wrapper-nitros-support/9540 "2025-10-24T10:18:36Z")

</div>

Hi @Myzhar and co My current set up on jetpack 6.2.1 feeding raw images using master branch of Zed wrapper is severely bottle necked by cudaStreamSynchronize and GPU malloc/copy/free etc. All this to say that the nitros…

---

## [ZED Camera Initialization Failure in Docker Container with zed\_ros2\_wrapper (Jetpack 6.2, ZED SDK 5.0)](https://community.stereolabs.com/t/zed-camera-initialization-failure-in-docker-container-with-zed-ros2-wrapper-jetpack-6-2-zed-sdk-5-0/8705)

<div class="topic-metadata">

**Author:** [@whypushhh](https://community.stereolabs.com/u/whypushhh)\
**Replies:** 14\
**Last updated:** [October 10, 2025, 2:34pm UTC](https://community.stereolabs.com/t/zed-camera-initialization-failure-in-docker-container-with-zed-ros2-wrapper-jetpack-6-2-zed-sdk-5-0/8705 "2025-10-10T14:34:37Z")

</div>

Dear Stereolabs Support Team, I am encountering an issue with the ZED ROS2 Wrapper in a Docker container. Here are the details of my setup and the problem: Environment: Platform: NVIDIA Jetson AGX Orin Jetpack: 6.2 (…

---

## [GPU Usage/Power Issues Using ZED2 with Jetson Xavier NX](https://community.stereolabs.com/t/gpu-usage-power-issues-using-zed2-with-jetson-xavier-nx/9899)

<div class="topic-metadata">

**Author:** [@selim](https://community.stereolabs.com/u/selim)\
**Replies:** 9\
**Last updated:** [September 22, 2025, 10:27am UTC](https://community.stereolabs.com/t/gpu-usage-power-issues-using-zed2-with-jetson-xavier-nx/9899 "2025-09-22T10:27:26Z")

</div>

I want to give brief information about my system (hardware, sofware etc.) and describe my situation. I am using the following hardware and softwares: Nvidia Jetson Xavier NX 16GB (Computing platform) ZED2 (Depth sensor…

---

## [Custom object detection in ros1](https://community.stereolabs.com/t/custom-object-detection-in-ros1/9909)

<div class="topic-metadata">

**Author:** [@nouhe](https://community.stereolabs.com/u/nouhe)\
**Replies:** 1\
**Last updated:** [September 17, 2025, 10:35am UTC](https://community.stereolabs.com/t/custom-object-detection-in-ros1/9909 "2025-09-17T10:35:50Z")

</div>

hello! I am using Zed2 with the zed-ros-wrapper. my goal is to have custom object detection, i’ve already done this using zed sdk (.onnx file - yolov5), but apparently, there is no custom detector in the zed-ros-wrappe…

---

## [Using External FOG-IMU with ZED2i for Better EKF Accuracy – Frame Alignment Issue in robot\_localization (ROS2)](https://community.stereolabs.com/t/using-external-fog-imu-with-zed2i-for-better-ekf-accuracy-frame-alignment-issue-in-robot-localization-ros2/9575)

<div class="topic-metadata">

**Author:** [@ZaWaLuDo77](https://community.stereolabs.com/u/ZaWaLuDo77)\
**Replies:** 11\
**Last updated:** [September 17, 2025, 3:53am UTC](https://community.stereolabs.com/t/using-external-fog-imu-with-zed2i-for-better-ekf-accuracy-frame-alignment-issue-in-robot-localization-ros2/9575 "2025-09-17T03:53:18Z")

</div>

To improve pose accuracy and reduce drift during rotation, I’m trying to replace the ZED2i’s built-in IMU with my own FOG-IMU (Fiber-Optic Gyroscope). I’m using ROS 2 (Humble) and the robot\_localization package for senso…

---

## [Custom Object Detector](https://community.stereolabs.com/t/custom-object-detector/4746)

<div class="topic-metadata">

**Author:** [@maheubi](https://community.stereolabs.com/u/maheubi)\
**Replies:** 1\
**Last updated:** [September 16, 2025, 3:08pm UTC](https://community.stereolabs.com/t/custom-object-detector/4746 "2025-09-16T15:08:26Z")

</div>

I’m currently developing an Autonomous Robot with ROS and am using the ZED 2i for navigating. I made a custom Object detector and now i have to include the detector into the ROS-Wrapper. I read, that this is not yet deve…

---

## [ZED 2i ROS 2 Wrapper: Velocity (Linear/Angular) Stuck at Zero on /odom Topic](https://community.stereolabs.com/t/zed-2i-ros-2-wrapper-velocity-linear-angular-stuck-at-zero-on-odom-topic/9696)

<div class="topic-metadata">

**Author:** [@kumuda](https://community.stereolabs.com/u/kumuda)\
**Replies:** 6\
**Last updated:** [August 20, 2025, 9:41am UTC](https://community.stereolabs.com/t/zed-2i-ros-2-wrapper-velocity-linear-angular-stuck-at-zero-on-odom-topic/9696 "2025-08-20T09:41:05Z")

</div>

Hello everyone, I’m working on an autonomous drone project using a ZED 2i camera for vision-based navigation. I’m trying to publish the drone’s position and velocity(obtained from camera) to a Pixhawk flight controller …

---

## [zed-ros2-wrapper build errors for Jetson Orin with ROS Foxy](https://community.stereolabs.com/t/zed-ros2-wrapper-build-errors-for-jetson-orin-with-ros-foxy/9635)

<div class="topic-metadata">

**Author:** [@SaanviM](https://community.stereolabs.com/u/SaanviM)\
**Replies:** 1\
**Last updated:** [August 11, 2025, 5:06pm UTC](https://community.stereolabs.com/t/zed-ros2-wrapper-build-errors-for-jetson-orin-with-ros-foxy/9635 "2025-08-11T17:06:28Z")

</div>

Description I have a Jetson Orin that has CUDA 11 and Foxy running. Since its CUDA 11, i installed the SDK version as below ZED SDK for JetPack 5.1.1 (L4T 35.3) 5.0 (Jetson Xavier, Orin AGX/NX/Nano, CUDA 11.4) I have t…

[Next page](https://community.stereolabs.com/tag/ros/3.md?match_all_tags=true&page=1&tags%5B%5D=ros)
