# ZEDmini/UnitySDK/Occulus Quest 2 AR Pass Through

**URL:** <https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305>\
**Category:** Uncategorized\
**Created:** [June 22, 2021, 3:04am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305 "2021-06-22T03:04:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![IshanBhatnagar14](https://community.stereolabs.com/user_avatar/community.stereolabs.com/ishanbhatnagar14/32/16_2.png) [@IshanBhatnagar14](https://community.stereolabs.com/u/IshanBhatnagar14)\
**Post date:** [June 22, 2021, 3:04am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305/1 "2021-06-22T03:04:16Z")

</div>

Hi, Is Occulus Quest 2 supported for AR pass through Application ?

---

<div class="post-metadata">

**Author:** ![BenjaminV](https://community.stereolabs.com/user_avatar/community.stereolabs.com/benjaminv/32/3863_2.png) [@BenjaminV](https://community.stereolabs.com/u/BenjaminV)\
**Post date:** [June 22, 2021, 7:28am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305/2 "2021-06-22T07:28:14Z")

</div>

Hi,

I only tested the ZED-mini with the Oculus Quest 1 and it’s working as expected. It should be the same with the Quest2.

However, the ZED-mini needs to be tethered to a computer. Your setup Quest2 + ZED-mini cannot be wireless.

Best regards,  
Benjamin Vallon

---

<div class="post-metadata">

**Author:** ![IshanBhatnagar14](https://community.stereolabs.com/user_avatar/community.stereolabs.com/ishanbhatnagar14/32/16_2.png) [@IshanBhatnagar14](https://community.stereolabs.com/u/IshanBhatnagar14)\
**Post date:** [June 22, 2021, 8:00am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305/3 "2021-06-22T08:00:57Z")

</div>

Hi , Can I try wireless setup with ZED 2 ? Lets say i broadcast a Zed 2 stream over ip !!

---

<div class="post-metadata">

**Author:** ![BenjaminV](https://community.stereolabs.com/user_avatar/community.stereolabs.com/benjaminv/32/3863_2.png) [@BenjaminV](https://community.stereolabs.com/u/BenjaminV)\
**Post date:** [June 22, 2021, 8:19am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305/4 "2021-06-22T08:19:56Z")

</div>

Hi,

First I do not recommend using a ZED2 for AR passthrough. The distance between the left and right cameras are not suited for AR.  
Then, I guess you can stream the ZED images to the Oculus Quest (If the camera is not attached to the headset but plugged to a computer). However it will generate latency which is not acceptable for AP purposes.

Best regards,  
Benjamin Vallon

---

<div class="post-metadata">

**Author:** ![BenjaminV](https://community.stereolabs.com/user_avatar/community.stereolabs.com/benjaminv/32/3863_2.png) [@BenjaminV](https://community.stereolabs.com/u/BenjaminV)\
**Post date:** [January 9, 2023, 8:47am UTC](https://community.stereolabs.com/t/zedmini-unitysdk-occulus-quest-2-ar-pass-through/305/6 "2023-01-09T08:47:47Z")

</div>

Please, do not reply to an old post with an unrelated issue.

You can either create a new post on the community forum or write a mail at [support@stereolabs.com](mailto:support@stereolabs.com)

Thanks.

Stereolabs Support