# Zed360 skeletons not converging

**URL:** <https://community.stereolabs.com/t/zed360-skeletons-not-converging/11764>\
**Category:** Unity\
**Created:** [October 1, 2026, 10:32am UTC](https://community.stereolabs.com/t/zed360-skeletons-not-converging/11764 "2026-10-01T10:32:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rosss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/rosss/32/4388_2.png) [@Rosss](https://community.stereolabs.com/u/Rosss)\
**Post date:** [October 1, 2026, 10:32am UTC](https://community.stereolabs.com/t/zed360-skeletons-not-converging/11764/1 "2026-10-01T10:32:46Z")

</div>

We are on Zed 5.4.1 -  
Our cameras are about 6 meters apart - both set at about 2 meters up with a lot of overlap in their coverage - they are two corners of a 6x6 meter room looking approximately into the center.  
No matter how long and how slow we walk around in circles the skeletons will not converge -  
they flicker about a lot and at best end up a couple of meters apart -  
Lighting is fairly diffuse and bright though there is a bit of shadow about…  
Just wondering if this is something that’s known with 5.4.1? - or i guess maybe one of the cameras is not working correctly - any hints about what we can do to track down the issue?  
Thanks

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 2, 2026, 12:21pm UTC](https://community.stereolabs.com/t/zed360-skeletons-not-converging/11764/2 "2026-10-02T12:21:33Z")

</div>

Hi @Rosss  
Please try to upgrade to ZED SDK v5.5 and verify if the problem is present also with the latest release.  
If that’s the case, please [record synchronized SVOs](https://docs.stereolabs.com/docs/development/zed-sdk/modules/camera/recording) from both cameras and share them with us to try to replicate and fix the issue.
