# Zed2i Orientation Drift in Y

**URL:** <https://community.stereolabs.com/t/zed2i-orientation-drift-in-y/2170>\
**Category:** ZED2\
**Created:** [February 24, 2023, 10:29pm UTC](https://community.stereolabs.com/t/zed2i-orientation-drift-in-y/2170 "2023-02-24T22:29:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![robots](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/r/48db29/32.png) [@robots](https://community.stereolabs.com/u/robots)\
**Post date:** [February 24, 2023, 10:29pm UTC](https://community.stereolabs.com/t/zed2i-orientation-drift-in-y/2170/1 "2023-02-24T22:29:31Z")

</div>

On 4 different Zed2i cameras the Y orientation drifts even when the camera is completely stationary. This has occurred with multiple different tripods and other mounting solutions across multiple locations. This makes the data mostly unusable.

I’ve attached a plot showing data recorded over a 1 minute period. I’ve also attached a csv with a subset of the data (full csv was too big to upload). There were big impacts nearby during this recording, but the same effect is observed at a stationary desk in an office. This was recorded with the ZED sensor viewer on the latest SDK

![image](https://community.stereolabs.com/uploads/default/original/2X/5/5a0d20af92af027d2c08cdb6e4153c7051db280c.png)  
[sensor\_data.csv](https://community.stereolabs.com/uploads/short-url/xpmQn6xcy1Ibsuf8J6IpOJAMhnJ.csv) (1.4 MB)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [February 25, 2023, 12:01am UTC](https://community.stereolabs.com/t/zed2i-orientation-drift-in-y/2170/2 "2023-02-25T00:01:08Z")

</div>

Hi @robots  
Try to recalibrate your cameras by placing them on the floor (a stable not vibrating surface is required) and running the ZED Calibration tool from the command line with the option `--calib_imu`

> [@Something's wrong with my Zed Mini IMU](https://community.stereolabs.com/t/somethings-wrong-with-my-zed-mini-imu/206/3):
>
> When you see the camera “spinning” in the “ZED Sensor Viewer” tool, that means that for some reason it lost the IMU calibration parameters. You can easily restore the IMU calibration running the “ZED Calibration” tool from the command line, adding the flag --cimu or --calib\_imu. Before running the calibration process please be sure that the camera is completely steady and placed on a horizontal surface. The re-calibration process is fast and fully automated, you can test if it worked correctl…
