# ZED X using PoE

**URL:** <https://community.stereolabs.com/t/zed-x-using-poe/5946>\
**Category:** ZED X\
**Created:** [May 9, 2024, 2:30pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946 "2024-05-09T14:30:47Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kris](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@Kris](https://community.stereolabs.com/u/Kris)\
**Post date:** [May 9, 2024, 2:30pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/1 "2024-05-09T14:30:48Z")

</div>

Hi,  
I am using a Jetson Orin NX 16 GB with PoE and a ZED X. The camera is not detected and zed.open() returns “CAMERA NOT DETECTED”. The Orin NX works as expected, but the ZED X camera does not seem to be powered. Measuring the voltage at the cable to the ZED X shows about ~0.02V compared to ~10V when using the socketed normal power cable to the Oring NX rather than PoE.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 9, 2024, 5:42pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/2 "2024-05-09T17:42:19Z")

</div>

Hi @Kris  
please run the command `sudo ZED_Diagnostic --dmesg` and send me the report file that it generates.

Does the ZED X work correctly if you power the ZED Box with the power jack?

---

<div class="post-metadata">

**Author:** ![camikva](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/c/858c86/32.png) [@camikva](https://community.stereolabs.com/u/camikva)\
**Post date:** [May 10, 2024, 8:13am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/3 "2024-05-10T08:13:59Z")

</div>

> [@Myzhar](#):
>
> ZED\_Diagnostic --dmesg

Hi  
[dmesg\_2.log](https://community.stereolabs.com/uploads/short-url/zSvDKwChPpUSMURWHjRT8CZ0TWD.log) (7.5 KB)

Here is the file. Yes the ZED X works correctly using the power jack.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 10, 2024, 8:18am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/4 "2024-05-10T08:18:49Z")

</div>

Please use `sudo` when running `ZED_Diagnostic --dmesg`, otherwise the diagnostic report does not contain the required information

---

<div class="post-metadata">

**Author:** ![camikva](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/c/858c86/32.png) [@camikva](https://community.stereolabs.com/u/camikva)\
**Post date:** [May 10, 2024, 8:22am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/5 "2024-05-10T08:22:13Z")

</div>

[dmesg\_4.log](https://community.stereolabs.com/uploads/short-url/3k9uPo1Cf6kMo0fhishgxinYtLM.log) (12.1 KB)

---

<div class="post-metadata">

**Author:** ![Kris](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@Kris](https://community.stereolabs.com/u/Kris)\
**Post date:** [May 10, 2024, 1:50pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/6 "2024-05-10T13:50:49Z")

</div>

I have tried changing the ethernet cable and with two different ZED X cameras, but still get the same result: Orin NX is working as expected, but no camera detected.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 10, 2024, 6:52pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/7 "2024-05-10T18:52:40Z")

</div>

> [@Myzhar](#):
>
> Does the ZED X work correctly if you power the ZED Box with the power jack?

What about this question?

---

<div class="post-metadata">

**Author:** ![Kris](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@Kris](https://community.stereolabs.com/u/Kris)\
**Post date:** [May 10, 2024, 6:55pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/8 "2024-05-10T18:55:27Z")

</div>

Yes everything works as expected then and the cameras are detected

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 10, 2024, 8:03pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/9 "2024-05-10T20:03:44Z")

</div>

Thank you for this information.  
I just reported the problem to the HW team.  
They will try to replicate and fix the issue.

I will update as soon as I have feedback.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 11, 2024, 11:08am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/10 "2024-05-11T11:08:14Z")

</div>

@Kris can you indicate the Power Mode you are using with your ZED Box when PoE+ powered?

---

<div class="post-metadata">

**Author:** ![Kris](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@Kris](https://community.stereolabs.com/u/Kris)\
**Post date:** [May 11, 2024, 11:13am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/11 "2024-05-11T11:13:37Z")

</div>

Hi, tried both 25W and MAXN. I see now that you mention it it should be limited to 15W? I will test this.

---

<div class="post-metadata">

**Author:** ![Kris](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@Kris](https://community.stereolabs.com/u/Kris)\
**Post date:** [May 11, 2024, 5:25pm UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/12 "2024-05-11T17:25:59Z")

</div>

Hi, tested 15W power setting with the same result of no cameras detected.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 14, 2024, 9:46am UTC](https://community.stereolabs.com/t/zed-x-using-poe/5946/13 "2024-05-14T09:46:33Z")

</div>

Hi @Kris  
please write an email to [support@stereolabs.com](mailto:support@stereolabs.com)
