# ZED X One Buffer Glitch

**URL:** <https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [March 29, 2026, 1:22am UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111 "2026-03-29T01:22:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![auc7us](https://community.stereolabs.com/user_avatar/community.stereolabs.com/auc7us/32/4156_2.png) [@auc7us](https://community.stereolabs.com/u/auc7us)\
**Post date:** [March 29, 2026, 1:22am UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111/1 "2026-03-29T01:22:36Z")

</div>

Using Zed X One, on jetson Orin AGX 64G, JetPack 6.2.2, ZED SDK 5.2.3, ZedLink Quad. Fresh Jetpack reflash with only ZED SDK on it.

Occasionally and undeterministically the attached video can be seen, the SDK seems to be fetching a 20 minutes old buffer from somewhere. Restarting jetson and capture card temporarily makes it go away, but it will come back. Already replaced GMSL cable, did not help.

[SN113866047.conf](https://community.stereolabs.com/uploads/short-url/yhtjzObaCmDTZFvYZcnrIGDVZl5.conf) (1.1 KB)

---

<div class="post-metadata">

**Author:** ![auc7us](https://community.stereolabs.com/user_avatar/community.stereolabs.com/auc7us/32/4156_2.png) [@auc7us](https://community.stereolabs.com/u/auc7us)\
**Post date:** [March 29, 2026, 1:29am UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111/2 "2026-03-29T01:29:09Z")

</div>

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/zmMkAHLIMhQhVNn15W9yDuULlqc.json) (25.8 KB)

---

<div class="post-metadata">

**Author:** ![auc7us](https://community.stereolabs.com/user_avatar/community.stereolabs.com/auc7us/32/4156_2.png) [@auc7us](https://community.stereolabs.com/u/auc7us)\
**Post date:** [March 30, 2026, 6:47pm UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111/3 "2026-03-30T18:47:20Z")

</div>

@Myzhar Can you please help me on this, there was another post shared a few days ago that was also not address by anyone.

---

<div class="post-metadata">

**Author:** ![auc7us](https://community.stereolabs.com/user_avatar/community.stereolabs.com/auc7us/32/4156_2.png) [@auc7us](https://community.stereolabs.com/u/auc7us)\
**Post date:** [April 13, 2026, 1:34pm UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111/4 "2026-04-13T13:34:09Z")

</div>

Hi, Can someone please address this and help me out? its been over 2 weeks. Thank you.

---

<div class="post-metadata">

**Author:** ![auc7us](https://community.stereolabs.com/user_avatar/community.stereolabs.com/auc7us/32/4156_2.png) [@auc7us](https://community.stereolabs.com/u/auc7us)\
**Post date:** [April 16, 2026, 10:57pm UTC](https://community.stereolabs.com/t/zed-x-one-buffer-glitch/11111/5 "2026-04-16T22:57:55Z")

</div>

Hi it’s really been hard to get this to work reliably. You guys are not addressing my requests for help after having spent over $4000 on your cameras. Any response would be appreciated we have no clue where we are going wrong.
