# Zed X enable minimum require?

**URL:** <https://community.stereolabs.com/t/zed-x-enable-minimum-require/6559>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [July 16, 2024, 7:29am UTC](https://community.stereolabs.com/t/zed-x-enable-minimum-require/6559 "2024-07-16T07:29:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![WolsYang](https://community.stereolabs.com/user_avatar/community.stereolabs.com/wolsyang/32/3315_2.png) [@WolsYang](https://community.stereolabs.com/u/WolsYang)\
**Post date:** [July 16, 2024, 7:29am UTC](https://community.stereolabs.com/t/zed-x-enable-minimum-require/6559/1 "2024-07-16T07:29:25Z")

</div>

Hi Zed team,  
We trying to porting 9296 with zed X on jetson.  
We try to test by cmd

```auto
v4l2-ctl -c bypass_mode=0 --stream-mmap

```

But got fail

```auto
[2769.797727] bwmgr API not supported
[2827.480555] bwmgr API not supported
[2830.004563] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms
[2830.013713] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel
[2830.024363] (NULL device *): vi_capture_control_message: NULL VI channel received
[2830.032093] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=2, csi_port=2
[2830.042761] (NULL device *): vi_capture_control_message: NULL VI channel received
[2830.050474] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 2 vc- 0
....(Same error loop)

```

```auto
cat /etc/nv_tegra_release 
# R35 (release), REVISION: 4.1, GCID: 33958178, BOARD: t186ref, EABI: aarch64, DATE: Tue Aug 1 19:57:35 UTC 2023

```

Do I need zed sdk to enable camera? Or should I control which gpio on 9296 to enable the cam

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 16, 2024, 10:52am UTC](https://community.stereolabs.com/t/zed-x-enable-minimum-require/6559/2 "2024-07-16T10:52:04Z")

</div>

Hi @WolsYang  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

Please write an email to [support@stereolabs.com](mailto:support@stereolabs.com). Add all the relevant information concerning your system, the GMSL2 capture card, the Jetson module, etc.
