# ZED X – Camera stream suddenly fails to start + ROI Calibration tool not working

**URL:** <https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380>\
**Category:** ZED X\
**Created:** [November 20, 2025, 5:04pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380 "2025-11-20T17:04:13Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 20, 2025, 5:04pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/1 "2025-11-20T17:04:13Z")

</div>

Hi everyone,  
I’m experiencing a sudden issue with my ZED X setup and I’m hoping someone can help clarify what might be happening.

Until mid-July everything was working perfectly. Today I reconnected my Jetson system and ran my usual ROI calibration script (`Instorelab_ROI_Calibration.sh`), but now the camera refuses to start.  
I have not changed any configuration or installed new software since then.

 ![image](https://community.stereolabs.com/uploads/default/original/2X/b/bea8667f127ddcabd79d2fdb68133528f46ef03a.png)

Below is the output I get in the terminal (also attached in the screenshot):

```auto
Detected ZED model: ZED X ZED X

# STEP 1: Starting SkeletonTracker …
Using the ZED resolution 'HD1200' defined in the environment variable DEFAULT_RESOLUTION …

# STEP 2: Starting the ROI Calibration Tool …
PYTHONPATH=/home/lm/instorelab/hipe_zed_stream_client python …
Camera Open: FAILURE
Exit program.

```

So the ROI Calibration script immediately fails because **the camera stream cannot be opened**.

### What I have already tested:

- Both ZED X cameras show up correctly in `ZED_Explorer --all` (status: AVAILABLE).

- The same script worked many times before (including in July).

- No updates or changes were manually installed by me.

- Python and ZED SDK packages seem correctly installed.

- Running from the internal SSD, not the external disk.

- Permissions are correct and the script is executable.

### My question:

Does anyone know what could cause **Camera Open: FAILURE** even though the ZED X devices are detected and appear as AVAILABLE?

Could this be related to:

- Argus / Jetson multimedia service failing?

- A driver crash?

- Some corrupted ZED SDK configuration?

- A missing dependency for GMSL camera streaming?

- A known issue with ZED X on Jetson after recent system restarts?

Any help, suggestions, or debugging steps would be highly appreciated.

Thanks a lot!

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 20, 2025, 5:19pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/2 "2025-11-20T17:19:27Z")

</div>

Hi @LM_AU

To assist you better, we need additional information regarding your device’s condition and system setup.

Please open a terminal console (`Ctrl+Alt+t`) and run these commands:

- `sudo ZED_Diagnostic --dmesg`
- `sudo ZED_Diagnostic -c`

After executing the commands, kindly send me the files `dmesg.log` and `ZED_Diagnostic_Results.json` located in the folder where the commands were run.

---

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 21, 2025, 8:40am UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/3 "2025-11-21T08:40:28Z")

</div>

Dear Walter,

Thank you for your response.

I have attached the file you requested to this email.

Kind regards,

Leonardo Mani

[cid:c6a38cae-0e12-43de-a61b-5bbe5c13879c]

* * *

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 21, 2025, 1:29pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/4 "2025-11-21T13:29:19Z")

</div>

Please upgrade your system:

- Install the latest [ZED SDK v5.1.1](https://www.stereolabs.com/developers/release). You are using v5.0.5
- Install the latest [ZED X Driver v1.3.2](https://www.stereolabs.com/developers/drivers). You are using v1.3.0

---

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 21, 2025, 3:45pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/5 "2025-11-21T15:45:53Z")

</div>

Dear Walter, as you suggested, I have now upgraded the system and am still encountering the same issue:

[cid:db3285b6-82ef-449b-b1b3-7fd9b005f317]

To investigate further, I ran a RAW streaming test on each of the four /dev/video\* endpoints assigned to the two ZED-X cameras:

- 

For Camera 1, both video nodes stream correctly (e.g., /dev/video0 and /dev/video1) → I receive several fps.  
\*  
For Camera 2, one video node streams correctly, but the other video node never starts streaming:

[cid:ff0863f7-c530-410a-88e6-2825eaaeee33]

When I run ZED\_Explorer, I can still see that both cameras work fine.

I’ve attached the two new files from ZED\_Diagnostic.

Best, Leonardo

* * *

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 21, 2025, 4:12pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/6 "2025-11-21T16:12:12Z")

</div>

I cannot see any problem with the information in the report file.

Can you try to open both cameras with the new ZED\_Studio application after rebooting the Jetson device?

---

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 21, 2025, 4:23pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/7 "2025-11-21T16:23:55Z")

</div>

Both of the cameras are working fine with the ZED Application.

[cid:187dd5a7-e376-4562-801f-93056b7c4ef9]

Something is wrong here?

[cid:3d1557ec-d923-428b-8caa-975a5940eda6]

But the issue with the calibration for the ROI persists

[cid:e9b817ac-c635-4e58-b9ac-47d8a854f635]

* * *

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 21, 2025, 4:47pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/8 "2025-11-21T16:47:21Z")

</div>

That Serial Number value is somehow weird.  
Can you check that 45500001 matches the value reported on the label on the camera?

---

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 21, 2025, 4:54pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/9 "2025-11-21T16:54:59Z")

</div>

Hi, the serial number is correct.

[cid:219cb862-0879-4c94-912b-4460a2412b70]

Everything was working fine the last time we used the sensor (July 2025), and since then, we have not changed anything in the code.

Have turned off the sensor again for a different project, and the first error I received was that the name was changed from “ZED-X” to “ZED X,” which was easy to fix. But then, for the rest, I have not been able to work with the sensors at all.

And I repeat: everything was working perfectly until July, and nothing has changed. What can we do now?

We urgently need to provide a service for a European institution before the end of the year.

Best, Leonardo

* * *

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 24, 2025, 1:39pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/10 "2025-11-24T13:39:07Z")

</div>

> [@LM\_AU](#):
>
> Have turned off the sensor again for a different project, and the first error I received was that the name was changed from “ZED-X” to “ZED X,” which was easy to fix. But then, for the rest, I have not been able to work with the sensors at all.

Where did this change happen?

> [@LM\_AU](#):
>
> And I repeat: everything was working perfectly until July, and nothing has changed. What can we do now?

Something changed at some point. Can you share your code?

---

<div class="post-metadata">

**Author:** ![LM\_AU](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/f14d63/32.png) [@LM\_AU](https://community.stereolabs.com/u/LM_AU)\
**Post date:** [November 24, 2025, 3:57pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/11 "2025-11-24T15:57:13Z")

</div>

Hi Walter,  
picking this up after our last messages. Here is a concise recap of what happened, what I changed, and what now consistently makes the calibration work on my side.  
Timeline (what changed)

- 

Last known good run: 16 July 2025.  
\*  
Back online: 18 November 2025 - I powered up the Jetson and started seeing calibration/stream errors that I had never seen before.  
\*  
As you noted, somewhere in between the device name surface changed from “ZED-X” to “ZED X” (I fixed that reference immediately).  
\*  
Per your advice on Nov 21, I updated to ZED SDK 5.1.1 and ZED-X Driver 1.3.2. Both cameras open fine in ZED tools, but my ROI script still failed at first.

My current working setup (Jetson)

- 

Python: 3.8.10 (dedicated venv .venv38)  
\*  
PyZED: 5.1 (wheel: pyzed-5.1-cp38-cp38-linux\_aarch64.whl)  
\*  
Key libs in this venv:  
\*  
numpy 1.24.4  
\*  
opencv-python 4.12.0.88  
\*  
pandas 2.0.3  
\*  
scipy 1.10.1  
\*  
shapely 2.0.7  
\*  
paho-mqtt 2.1.0  
\*  
python-dotenv 1.0.1  
\*  
Cameras: both ZED X units are reported AVAILABLE in ZED tools; I typically target SN 45500001 for the calibration flow.

What actually fixes the failure (minimal workaround)  
If I export only these two variables in the same shell before launching the calibration script, the camera opens and the ROI tool runs reliably:

export HIPE\_SRC\_ZED\_SERIAL\_NUMBER=45500001  
export DEFAULT\_RESOLUTION=HD1200  
./Instorelab\_ROI\_Calibration.sh

Why this seems to matter  
From my tests, failures were tied to ambiguous device selection and/or missing resolution defaults between the streaming app and the client. For example:

- 

Just activating a venv and running the script → often ended with Camera Open: FAILURE.  
\*  
Adding only HIPE\_SRC\_ZED\_SERIAL\_NUMBER → still failed.  
\*  
Adding only DEFAULT\_RESOLUTION → still failed.  
\*  
Adding both HIPE\_SRC\_ZED\_SERIAL\_NUMBER and DEFAULT\_RESOLUTION → consistently works (the client reports ZED Model, SN, resolution 1920×1200@15 FPS, and proceeds to calibration).

Given we once referenced the camera as “ZED-X” and later it appears as “ZED X,” my guess is that selection logic became sensitive to explicit serial and resolution being present. Once I force those two, everything aligns and the pipeline behaves.  
Questions for you

1. 

Does this match your understanding that explicit serial + explicit resolution is the minimal robust requirement to avoid selection conflicts (especially on Jetson + ZED X)?  
2.  
Would you recommend a permanent fix such as:  
\*  
reading serial/resolution from a single shared config that both streamer and client load, or  
\*  
hard-pinning them in the launcher scripts?  
3.  
Given the above, do you still suggest any extra upgrades (Python / OS), or is it acceptable to stay on Python 3.8 as long as I set serial and resolution explicitly?

Thank you best, Leonardo

* * *

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 24, 2025, 4:10pm UTC](https://community.stereolabs.com/t/zed-x-camera-stream-suddenly-fails-to-start-roi-calibration-tool-not-working/10380/12 "2025-11-24T16:10:52Z")

</div>

> [@LM\_AU](#):
>
> Does this match your understanding that explicit serial + explicit resolution is the minimal robust requirement to avoid selection conflicts (especially on Jetson + ZED X)?

Normally, the best way to avoid any selection conflict is by using the serial number of the camera.  
The resolution does not affect this.

The next version of the SDK will allow you to select the camera also by explicitly using the GMSL2 port, allowing you to unequivocally select a camera that is always connected to the same port/wire.
