# ZED Quad Link not detecting any cameras

**URL:** <https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447>\
**Category:** ZED X\
**Tags:** sdk, jetson\
**Created:** [July 18, 2025, 2:17pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447 "2025-07-18T14:17:08Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 18, 2025, 2:17pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/1 "2025-07-18T14:17:08Z")

</div>

I am currently working on integrating ZED X cameras using the Quad Link setup on the Jetson Orin AGX platform.

While the hardware setup is in place, I encountering difficulties in integrating the cameras with the Jetson system and initiating the video stream. I would greatly appreciate any guidance or support you could provide to help me resolve this issue and move forward efficiently.

For your reference, I’ve included more technical details about our current setup and the challenges I am facing below.

**Jetson model** : AGX Orin.

**ZED Link** : Quad Link.

**Camera Setup** : 3 - ZED X One , 2 - ZED X mini.

**Connection Type** : GMSL.

**SDK** : Latest ZED SDK and Link drivers were installed.

**Power**  **Supply** : Jetson → 19v Power, Quad Link - Power supply Station with 19v.

Since I cannot upload any files or paste a full log here, I am attaching the drive link where all the attachments are present.

[Attachments](https://drive.google.com/drive/folders/1Zl1Pbzw6LhBOs7NRdQZH32nw7BfKvykC?usp=sharing)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 18, 2025, 6:08pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/2 "2025-07-18T18:08:53Z")

</div>

Hi @snknitheesh  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

Please send pictures showing your capture card installed with all the connections.  
Please also follow the [installation](https://www.stereolabs.com/docs/embedded/zed-link/quad-jetson-orin-agx-devkit-setup) and [troubleshooting](https://www.stereolabs.com/docs/embedded/zed-link/troubleshooting) guides.

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 18, 2025, 6:11pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/3 "2025-07-18T18:11:58Z")

</div>

![IMG_6063](https://community.stereolabs.com/uploads/default/original/2X/6/6b5b69a69e096d79558e1ec9e5ced0d45bc5823c.jpeg)  
 ![IMG_6062](https://community.stereolabs.com/uploads/default/original/2X/0/0ac68433590061d0aded4a5c9505228762123d4d.jpeg)  
 ![IMG_6061](https://community.stereolabs.com/uploads/default/original/2X/7/703e6f3fb2c42a383409eba82d799f858043b5dc.jpeg)

I followed all the instructions perfectly and that can be seen in the image.

FYI, Power supply I used is a PSU and I set it to 19v manually and gave power to the board. Could it be because of that ? As seen from the image, power is being drawn. But it’s very less. Could it be the issue ?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 18, 2025, 6:20pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/4 "2025-07-18T18:20:05Z")

</div>

> [@snknitheesh](#):
>
> **Camera Setup** : 3 - ZED X One , 2 - ZED X mini.

Are they all ZED X One GS? I cannot understand from the picture if you are using a ZED X One 4K too.

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 18, 2025, 6:22pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/5 "2025-07-18T18:22:39Z")

</div>

Hi @Myzhar. It is a stack of 3 - ZED X one and 2 ZED X Mini. X one is connected in one set of 4 gsml and depth cam is set in a different set of 4 pin gsml.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 18, 2025, 6:25pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/6 "2025-07-18T18:25:03Z")

</div>

> [@snknitheesh](#):
>
> 3 - ZED X one

ZED X One GS or ZED X One 4K?

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 18, 2025, 6:26pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/7 "2025-07-18T18:26:16Z")

</div>

ZED X ONE GS is the I am using @Myzhar

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 18, 2025, 6:27pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/8 "2025-07-18T18:27:42Z")

</div>

Please run `sudo ZED_Diagnostic` and send the JSON report file that it generates.

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 18, 2025, 6:40pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/9 "2025-07-18T18:40:01Z")

</div>

Hi @Myzhar I have already attached that file in the drive and shared it in the first comment. You want me to resend it ?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 21, 2025, 9:15am UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/10 "2025-07-21T09:15:00Z")

</div>

I need it executed with `sudo`

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [July 21, 2025, 12:55pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/11 "2025-07-21T12:55:30Z")

</div>

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/1ZxLtdmY3ttBdSo7JFXGsdH6sEX.json) (63.9 KB)  
Hi @Myzhar . As requested, I ran it with sudo and this is the output. I even checked it by changing the power supply and got the same results.

I did the following debugging.

1. I removed the quad link card completely and fixed it on a different Jetson with jetpack 5.1.0 and installed specific Link Drivers for that to test it out. But it did not work. Faced the same issues.
2. I now changed it back to the same Jetson with the latest jetpack version and that is where I ran sudo ZED\_Diagnostic and sent u the results.
3. Even switching to new power supply did not work.
4. I have attached the video of the current setup with the new power supply [here.](https://drive.google.com/file/d/1TSPwXUgu0yxqVrxnrbRB3RUDM6RNkzmY/view?usp=sharing)

Could this be a hardware issue ?

---

<div class="post-metadata">

**Author:** ![LeoBrizi](https://community.stereolabs.com/user_avatar/community.stereolabs.com/leobrizi/32/6093_2.png) [@LeoBrizi](https://community.stereolabs.com/u/LeoBrizi)\
**Post date:** [April 15, 2026, 3:41pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/12 "2026-04-15T15:41:21Z")

</div>

How did you end up solving it?

---

<div class="post-metadata">

**Author:** ![snknitheesh](https://community.stereolabs.com/user_avatar/community.stereolabs.com/snknitheesh/32/4693_2.png) [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Post date:** [April 15, 2026, 4:16pm UTC](https://community.stereolabs.com/t/zed-quad-link-not-detecting-any-cameras/9447/13 "2026-04-15T16:16:38Z")

</div>

Turns out it was a hardware issue. Replacing it worked for me.
