# ZED mink Quad is not working.

**URL:** <https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648>\
**Category:** ZED X\
**Created:** [April 22, 2025, 12:22pm UTC](https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648 "2025-04-22T12:22:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![myunghwan](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/3ec8ea/32.png) [@myunghwan](https://community.stereolabs.com/u/myunghwan)\
**Post date:** [April 22, 2025, 12:22pm UTC](https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648/1 "2025-04-22T12:22:19Z")

</div>

My Zed Link Quad is not working. As far as I know, as connecting the external power, one LED in the ZED Link Quad should be on. But now, the LED is not on, and the connection with Jetson is also not working.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [April 22, 2025, 2:03pm UTC](https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648/2 "2025-04-22T14:03:09Z")

</div>

Hi @myunghwan

To assist you better, we need additional information regarding your device’s condition and system setup.

Please open a terminal console (`Ctrl+Alt+t`) and run these commands:

- `sudo ZED_Diagnostic --dmesg`
- `ZED_Diagnostic -c`

After executing the commands, kindly send me the files `dmesg.log` and `ZED_Diagnostic_Results.json` located in the folder where the commands were run.

Please also send pictures of your set up.

---

<div class="post-metadata">

**Author:** ![myunghwan](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/3ec8ea/32.png) [@myunghwan](https://community.stereolabs.com/u/myunghwan)\
**Post date:** [April 28, 2025, 3:26pm UTC](https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648/3 "2025-04-28T15:26:43Z")

</div>

I cannot upload files, since I am new user.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [April 29, 2025, 6:48am UTC](https://community.stereolabs.com/t/zed-mink-quad-is-not-working/8648/4 "2025-04-29T06:48:33Z")

</div>

Please send them to [support@stereolabs.com](mailto:support@stereolabs.com)
