# ZED Link Quad on AGX Orin Manual

**URL:** <https://community.stereolabs.com/t/zed-link-quad-on-agx-orin-manual/6509>\
**Category:** ZED X\
**Created:** [July 10, 2024, 1:15am UTC](https://community.stereolabs.com/t/zed-link-quad-on-agx-orin-manual/6509 "2024-07-10T01:15:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![woawo1213](https://community.stereolabs.com/user_avatar/community.stereolabs.com/woawo1213/32/3010_2.png) [@woawo1213](https://community.stereolabs.com/u/woawo1213)\
**Post date:** [July 10, 2024, 1:15am UTC](https://community.stereolabs.com/t/zed-link-quad-on-agx-orin-manual/6509/1 "2024-07-10T01:15:27Z")

</div>

Hi,  
I want to use a quad capture card, but I’m confused about which official manual to follow.

Link1: [ZED Link Quad on AGX Orin - Stereolabs](https://www.stereolabs.com/docs/get-started-with-zed-link/quad-jetson-orin-agx-devkit-setup)

Link #1 says to plug in the power adapter cable and apply power.

Link2: [Setting up ZED X on AGX Orin / Xavier Developer Kits - Stereolabs](https://www.stereolabs.com/docs/get-started-with-zed-x/jetson-agx-devkit-setup)

Link #2 says you don’t need to power the capture card separately.

Which is the correct manual?

Second, the capture card came with a GMSL2 1-4 M-F cable, which of the four connectors should I plug it into for the camera to work?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [July 10, 2024, 7:19am UTC](https://community.stereolabs.com/t/zed-link-quad-on-agx-orin-manual/6509/2 "2024-07-10T07:19:56Z")

</div>

Hi @woawo1213

> [@woawo1213](#):
>
> Link1: [ZED Link Quad on AGX Orin - Stereolabs](https://www.stereolabs.com/docs/get-started-with-zed-link/quad-jetson-orin-agx-devkit-setup)  
> Link #1 says to plug in the power adapter cable and apply power.

This is the correct guide to follow. The second link refers to a ZED Link DUO capture card.

> [@woawo1213](#):
>
> Second, the capture card came with a GMSL2 1-4 M-F cable, which of the four connectors should I plug it into for the camera to work?

All the wires work in the same way
