# ZED\_diagnostic fails and says capture card not detected

**URL:** <https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560>\
**Category:** ZED X\
**Tags:** sdk, jetson\
**Created:** [December 29, 2025, 11:25am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560 "2025-12-29T11:25:28Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![hamdan11](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/ce7236/32.png) [@hamdan11](https://community.stereolabs.com/u/hamdan11)\
**Post date:** [December 29, 2025, 11:25am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/1 "2025-12-29T11:25:29Z")

</div>

i am using zedx camera and everything was working fine and one day when i run the zed camera it says camera not detected and capture card not plugged in …. my dmesg logs are below … please help …

```auto
Created: Mon Dec 22 2025

###########################################
############ ZED SDK VERSION #############
###########################################

ZED SDK Version (Diag): 5.1.1
ZED SDK Version (RT): 5.1.1

###########################################
############ Linux Uname #############
###########################################

Linux harvested 5.15.148-tegra #1 SMP PREEMPT Mon Jun 16 08:24:48 PDT 2025 aarch64 aarch64 aarch64 GNU/Linux

###########################################
############ DMESG \[ZEDX\] LOG #############
###########################################

###########################################
############ DMESG \[MAX9x\] LOG #############
###########################################

\[13.564842\] sl_max96712: module verification failed: signature and/or required key missing - tainting kernel

###########################################
############ DMESG \[PCA\] LOG #############
###########################################

\[3.785228\] pca954x 2-0070: probe failed

###########################################
############ DMESG \[DTS\] LOG #############
###########################################

###########################################
############ DTB list original ###########
###########################################

/boot/dtb/kernel_tegra234-p3768-0000+p3767-0001-nv.dtb

###########################################
############ DTB list SLabs ###########
###########################################

board.py
extlinux.py
fio.py
Headers
Jetson
Linux
**pycache**
Utils
zlconfig

###########################################
############ EXTlinux file ###########
###########################################

TIMEOUT 30
DEFAULT Stereolabs

MENU TITLE L4T boot options

LABEL primary
MENU LABEL primary kernel
LINUX /boot/Image
INITRD /boot/initrd
APPEND ${cbootargs} root=PARTUUID=ba110521-9f2b-4b3c-89b2-77ed8f04e6e1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 video=efifb:off console=tty0

# When testing a custom kernel, it is recommended that you create a backup of

# the original kernel and add a new entry to this file so that the device can

# fallback to the original kernel. To do this:

# 

# 1, Make a backup of the original kernel

# sudo cp /boot/Image /boot/Image.backup

# 

# 2, Copy your custom kernel into /boot/Image

# 

# 3, Uncomment below menu setting lines for the original kernel

# 

# 4, Reboot

# LABEL backup

# MENU LABEL backup kernel

# LINUX /boot/Image.backup

# INITRD /boot/initrd

# APPEND ${cbootargs}

LABEL Stereolabs
MENU LABEL Stereolabs kernel
LINUX /boot/Image
FDT /boot/dtb/kernel_tegra234-p3768-0000+p3767-0001-nv.dtb
INITRD /boot/initrd
APPEND ${cbootargs} root=PARTUUID=ba110521-9f2b-4b3c-89b2-77ed8f04e6e1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 video=efifb:off console=tty0
OVERLAYS /boot/tegra234-p3768-camera-zedlink-duo-sl-overlay.dtbo

###########################################
############ Jetpack ###########
###########################################

# R36 (release), REVISION: 4.7, GCID: 42132812, BOARD: generic, EABI: aarch64, DATE: Thu Sep 18 22:54:44 UTC 2025

# KERNEL_VARIANT: oot

TARGET_USERSPACE_LIB_DIR=nvidia
TARGET_USERSPACE_LIB_DIR_PATH=usr/lib/aarch64-linux-gnu/nvidia

###########################################
############ Dpkg list ###########
###########################################

ii stereolabs-zedlink-duo 1.3.1-LI-MAX96712-all-L4T36.4.0 arm64 NVIDIA Kernel DTB Modified Package by Stereolabs

####################################
############ Driver list ###########
####################################

/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max96712/sl_max96712.ko==> exists
/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedx/sl_zedx.ko==> exists
/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedone4k/sl_zedxone_uhd.ko==> exists
/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedxpro/sl_zedxpro.ko==> exists
/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max9295/sl_max9295.ko==> exists

################################################
############ ZEDX Daemon Status LS #############
################################################

● zed_x_daemon.service - ZED-X Daemon service
Loaded: loaded (/etc/systemd/system/zed_x_daemon.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2025-12-22 14:23:06 IST; 1min 57s ago
Main PID: 5051 (ZEDX_Daemon)
Tasks: 5 (limit: 8808)
Memory: 940.0K
CPU: 216ms
CGroup: /system.slice/zed_x_daemon.service
└─5051 /usr/sbin/ZEDX_Daemon

Dec 22 14:23:06 harvested systemd\[1\]: Started ZED-X Daemon service.
Dec 22 14:23:06 harvested ZEDX_Daemon\[5051\]: \[“Mon Dec 22 14:23:06 2025” \]\[ZED-X Daemon\] Using TCP port (Read/Write): 20206 and 20207
Dec 22 14:23:06 harvested ZEDX_Daemon\[5051\]: \[“Mon Dec 22 14:23:06 2025” \]\[ZED-X Daemon\] \*\* Created Sub Endpoint “tcp://127.0.0.1:20206”
Dec 22 14:23:06 harvested ZEDX_Daemon\[5051\]: \[“Mon Dec 22 14:23:06 2025” \]\[ZED-X Daemon\] \*\* Created Pub Endpoint “tcp://127.0.0.1:20207”

################################################
############ ZEDX Driver State #############
################################################

Note : If the following drivers has a id-state <0, reboot is required

sl_zedxone_uhd 36864 0
sl_zedx 28672 0
sl_zedxpro 20480 0
sl_max9295 16384 3 sl_zedxpro,sl_zedxone_uhd,sl_zedx
sl_max96712 24576 4 sl_zedxpro,sl_zedxone_uhd,sl_max9295,sl_zedx
tegra_camera 217088 7 sl_zedxpro,nvhost_isp5,nvhost_nvcsi_t194,sl_zedxone_uhd,nv_hawk_owl,nvhost_vi5,sl_zedx
videodev 249856 7 v4l2_async,sl_zedxpro,videobuf2_v4l2,tegra_camera,sl_zedxone_uhd,videobuf2_common,sl_zedx

################################################
############ I2C Trace \[-l\] #############
################################################

i2c-0	i2c 3160000.i2c I2C adapter
i2c-1	i2c c240000.i2c I2C adapter
i2c-2	i2c 3180000.i2c I2C adapter
i2c-4	i2c Tegra BPMP I2C adapter I2C adapter
i2c-5	i2c 31b0000.i2c I2C adapter
i2c-7	i2c c250000.i2c I2C adapter
i2c-9	i2c NVIDIA SOC i2c adapter 0 I2C adapter

################################################
############ I2C Trace /dev/i2C-0 #############
################################################

 0 1 2 3 4 5 6 7 8 9 a b c d e f

00: – – – – – – – –
10: – – – – – – – – – – – – – – – –
20: – – – – – – – – – – – – – – – –
30: – – – – – – – – – – – – – – – –
40: – – – – – – – – – – – – – – – –
50: UU – – – – – – UU – – – – – – – –
60: – – – – – – – – – – – – – – – –
70: – – – – – – – –

################################################
############ I2C Trace /dev/i2C-1 #############
################################################

 0 1 2 3 4 5 6 7 8 9 a b c d e f

00: – – – – – – – –
10: – – – – – – – – – – – – – – – –
20: – – – – – UU – – – – – – – – – –
30: – – – – – – – – – – – – – – – –
40: UU – – – – – – – – – – – – – – –
50: – – – – – – – – – – – – – – – –
60: – – – – – – – – – – – – – – – –
70: – – – – – – – –

################################################
############ I2C Trace /dev/i2C-2 #############
################################################

 0 1 2 3 4 5 6 7 8 9 a b c d e f

00: – – – – – – – –
10: – – – – – – – – – – – – – – – –
20: – – – – – – – – – – – – – – – –
30: – – – – – – – – – – – – – – – –
40: – – – – – – – – – – – – – – – –
50: – – – – – – – – – – – – – – – –
60: – – – – – – – – – – – – – – – –
70: – – – – – – – –

> > No bus available at index 3
> > No bus available at index 6
> > ################################################
> > ############ I2C Trace /dev/i2C-7 #############
> > ################################################

 0 1 2 3 4 5 6 7 8 9 a b c d e f

00: – – – – – – – –
10: – – – – – – – – – – – – – – – –
20: – – – – – – – – – – – – – – – –
30: – – – – – – – – – – – – – – – –
40: – – – – – – – – – – – – – – – –
50: – – – – – – – – – – – – – – – –
60: – – – – – – – – – – – – – – – –
70: – – – – – – – –

> > No bus available at index 8
> > ################################################
> > ############ I2C Trace /dev/i2C-9 #############
> > ################################################

Error: Bus doesn’t support detection commands

> > No bus available at index 10
> > No bus available at index 11
> > No bus available at index 12
> > No bus available at index 13
> > No bus available at index 14
> > No bus available at index 15
> > No bus available at index 16
> > No bus available at index 30
> > No bus available at index 31
> > No bus available at index 32
> > No bus available at index 33
> > No bus available at index 34
> > No bus available at index 35
> > No bus available at index 36
> > No bus available at index 37
> > No bus available at index 38
> > No bus available at index 39
> > No bus available at index 40
> >

```

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [December 29, 2025, 2:06pm UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/2 "2025-12-29T14:06:26Z")

</div>

Hi @hamdan11  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

What type of Jetson are you using?  
Please send a picture of your setup so I can check all the connections.

---

<div class="post-metadata">

**Author:** ![hamdan11](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/ce7236/32.png) [@hamdan11](https://community.stereolabs.com/u/hamdan11)\
**Post date:** [December 30, 2025, 5:43am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/3 "2025-12-30T05:43:30Z")

</div>

hi.. im using jetson orin nx 8gb …

 ![IMG_0664](https://community.stereolabs.com/uploads/default/original/2X/d/d9de696890ff4e5a74e5a59cdab128a238826357.jpeg)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [December 30, 2025, 9:47am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/4 "2025-12-30T09:47:42Z")

</div>

The capture card is not correctly connected:

> **[ZED Link Duo on Orin Nano - Stereolabs](https://www.stereolabs.com/docs/embedded/zed-link/dual-jetson-orin-nano-devkit-setup)**
>
> This tutorial will help you set up the ZED Link Duo GMSL2 capture card, and use the Stereolabs GMSL2 cameras with the NVIDIA® Jetson™ Orin Nano Developer Kits.

The flat cables are inverted:

> **[ZED Link Duo on Orin Nano - Stereolabs](https://www.stereolabs.com/docs/embedded/zed-link/dual-jetson-orin-nano-devkit-setup)**
>
> This tutorial will help you set up the ZED Link Duo GMSL2 capture card, and use the Stereolabs GMSL2 cameras with the NVIDIA® Jetson™ Orin Nano Developer Kits.

Furthermore, one of the flat cables is not correctly plugged into the connector.

Are you using the correct cables? They do not look like the model indicated in the documentation:

```auto
2x FPC Camera Cable 22-pin 0.5mm Pitch to 15-pin 1.0mm Pitch (not included)*

```

---

<div class="post-metadata">

**Author:** ![hamdan11](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/ce7236/32.png) [@hamdan11](https://community.stereolabs.com/u/hamdan11)\
**Post date:** [December 30, 2025, 11:16am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/5 "2025-12-30T11:16:46Z")

</div>

the black part of the cable should be on the top right .. have connected it the same way … here is the picture of the cable im using …

 ![IMG_0665](https://community.stereolabs.com/uploads/default/original/2X/d/d3fe3a716f0bfd11792aa734bb4190ba8f182379.jpeg)

 ![IMG_0666](https://community.stereolabs.com/uploads/default/original/2X/2/200b5d18956f6208fb21de31120e1678cf981fdc.jpeg)

---

<div class="post-metadata">

**Author:** ![hamdan11](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/ce7236/32.png) [@hamdan11](https://community.stereolabs.com/u/hamdan11)\
**Post date:** [December 30, 2025, 11:41am UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/6 "2025-12-30T11:41:37Z")

</div>

also these were the cables i was using in my other setup and they are working fine … i changed the cables as well but the issue persists

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [December 30, 2025, 12:59pm UTC](https://community.stereolabs.com/t/zed-diagnostic-fails-and-says-capture-card-not-detected/10560/7 "2025-12-30T12:59:47Z")

</div>

The cables are good, maybe a little too long, but it should not be a problem.

One of the cables was not correctly plugged:

 ![image](https://community.stereolabs.com/uploads/default/original/2X/b/be930029ec2d619fa4e3d2b4199a0c31c0f7c6ee.jpeg)

Have you tried to switch the ports? They are not coherent with the indications of the documentation
