# Zed 2i is detected in USB but not getting video in Zed Explorer

**URL:** <https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134>\
**Category:** ZED2\
**Tags:** sdk\
**Created:** [October 10, 2025, 7:43am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134 "2025-10-10T07:43:44Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![vansh\_agg](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/v/73ab20/32.png) [@vansh\_agg](https://community.stereolabs.com/u/vansh_agg)\
**Post date:** [October 10, 2025, 7:43am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/1 "2025-10-10T07:43:44Z")

</div>

### **Title:** ZED 2i not detected on Ubuntu 22.04 with ZED SDK v5.0.7

**Hardware:**

- Camera: [Stereolabs](https://www.stereolabs.com/) ZED 2i

- GPU: NVIDIA GeForce RTX 3060 Mobile (Max-Q)

- USB: Direct connection to USB 3.0 port

**Software / Drivers:**

- Ubuntu 22.04

- NVIDIA driver: 550.163.01

- CUDA: 12.4

- ZED SDK: v5.0.7 (`ZED_SDK_Ubuntu22_cuda12.8_tensorrt10.9_v5.0.7.zstd.run`)

**Steps Taken:**

1. Installed ZED SDK v5.0.7 using `.run` installer.

2. Installed NVIDIA driver successfully; confirmed `nvidia-smi` works.

3. Verified Secure Boot is **disabled** in BIOS.

4. Checked USB detection:

```auto
lsusb | grep -i stereo
Bus 003 Device 005: ID 2b03:f881 STEREOLABS ZED-2i HID INTERFACE
Bus 003 Device 006: ID 2b03:f880 STEREOLABS ZED 2i

```

1. Checked kernel logs:

```auto
sudo dmesg | grep -i zed

```

- Shows USB connection but no ZED kernel module loaded.

1. Verified permissions and added user to `video` and `plugdev` groups.

**Problem:**

- `ZED_Explorer` and `/usr/local/zed/tools/ZED_Diagnostic` report **“Camera not detected”**.

- `lsmod | grep zed` returns **empty** , indicating the kernel module is not loaded.

- Tried reinstalling SDK, but camera still not accessible.

- [ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/8l483mv8vlf8ooJsuIdGV19uPBC.json) (6.5 KB)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 10, 2025, 9:38am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/2 "2025-10-10T09:38:15Z")

</div>

Hi @vansh_agg  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

From the diagnostic:

```auto
"glx_info": "OpenGL vendor string: AMD\nOpenGL renderer string: RENOIR (renoir, LLVM 15.0.7, DRM 3.57, 6.8.0-85-generic)\nOpenGL core profile version string: 4.6 (Core Profile) Mesa 23.2.1-1ubuntu3.1~22.04.3

```

This means that the discrete GPU is not used.

Please apply the fix described in this support page: [https://support.stereolabs.com/hc/en-us/articles/8422008229143-How-can-I-solve-ZED-SDK-OpenGL-issues-under-Ubuntu](https://support.stereolabs.com/hc/en-us/articles/8422008229143-How-can-I-solve-ZED-SDK-OpenGL-issues-under-Ubuntu)

---

<div class="post-metadata">

**Author:** ![vansh\_agg](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/v/73ab20/32.png) [@vansh\_agg](https://community.stereolabs.com/u/vansh_agg)\
**Post date:** [October 10, 2025, 9:50am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/3 "2025-10-10T09:50:01Z")

</div>

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/pPMrVCJfd7TaiRFt9xHd7orFeZW.json) (6.4 KB)  
i done with your suggestion this specific issue solve but something is still there which cause problem.  
new diagnostic results, please check

thank you

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 10, 2025, 9:55am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/4 "2025-10-10T09:55:47Z")

</div>

Hi @vansh_agg  
Please use `cheese` or `guvcview` to try to open the camera stream.  
Is it visible? Can you change the resolution and grab rate?

---

<div class="post-metadata">

**Author:** ![vansh\_agg](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/v/73ab20/32.png) [@vansh\_agg](https://community.stereolabs.com/u/vansh_agg)\
**Post date:** [October 10, 2025, 11:40am UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/5 "2025-10-10T11:40:24Z")

</div>

hey , i found the issue there is a mismatch in the cuda version i have installed 12.4 and for zed sdk i have installed 12.8 .

you please give me the zed\_sdk for cuda 12.4

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 10, 2025, 4:01pm UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/6 "2025-10-10T16:01:54Z")

</div>

> [@vansh\_agg](#):
>
> hey , i found the issue there is a mismatch in the cuda version i have installed 12.4 and for zed sdk i have installed 12.8 .

That should not be a problem. The major version is important, not the minor.

---

<div class="post-metadata">

**Author:** ![v\_agg](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/v/3bc359/32.png) [@v\_agg](https://community.stereolabs.com/u/v_agg)\
**Post date:** [October 13, 2025, 12:14pm UTC](https://community.stereolabs.com/t/zed-2i-is-detected-in-usb-but-not-getting-video-in-zed-explorer/10134/7 "2025-10-13T12:14:22Z")

</div>

i am also having same kind of issue on my ubuntu machine then i try on my windows but still facing the issue please help .

> [@Zed 2i is not Detected in zed diagnostic](https://community.stereolabs.com/t/zed-2i-is-not-detected-in-zed-diagnostic/10147):
>
> Zed 2i is works in the Zed explorer but not works in diagnostic, depth viewer, and other application also works in the windows camera and visible in the ports why this happen? can i share the diagnostic reports
