# Yocto support for ZED X camera

**URL:** <https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [January 15, 2024, 11:41am UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365 "2024-01-15T11:41:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mmuhiedd](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/838e76/32.png) [@mmuhiedd](https://community.stereolabs.com/u/mmuhiedd)\
**Post date:** [January 15, 2024, 11:41am UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365/1 "2024-01-15T11:41:01Z")

</div>

Hello !  
We are trying to use the ZED X mini camera on a Jetson board (Orin AGX) using a specific OS: balenaOS.  
This OS relies on Yocto.  
Therefore, the best to way to integrate the ZED X driver would be to use its yocto layer when building the OS image.  
Is there any yocto layer available for the ZED X mini ? If not, is it planned ?  
Thanks!

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [January 15, 2024, 11:42am UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365/2 "2024-01-15T11:42:46Z")

</div>

Hi @mmuhiedd  
Welcome to the Stereolabs community.

Please write an email to [support@stereolabs.com](mailto:support@stereolabs.com) adding all the useful details.

---

<div class="post-metadata">

**Author:** ![mmuhiedd](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/838e76/32.png) [@mmuhiedd](https://community.stereolabs.com/u/mmuhiedd)\
**Post date:** [January 15, 2024, 1:09pm UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365/3 "2024-01-15T13:09:29Z")

</div>

I’ll do it, thanks !

---

<div class="post-metadata">

**Author:** ![linh.nguyen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/l/ecccb3/32.png) [@linh.nguyen](https://community.stereolabs.com/u/linh.nguyen)\
**Post date:** [February 23, 2024, 12:00pm UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365/4 "2024-02-23T12:00:55Z")

</div>

I have the same wish, since our project also relies on yocto 🙂

---

<div class="post-metadata">

**Author:** ![gurbain](https://community.stereolabs.com/user_avatar/community.stereolabs.com/gurbain/32/1621_2.png) [@gurbain](https://community.stereolabs.com/u/gurbain)\
**Post date:** [June 11, 2024, 7:27am UTC](https://community.stereolabs.com/t/yocto-support-for-zed-x-camera/4365/5 "2024-06-11T07:27:46Z")

</div>

Hello,

I would like to revive this topic once more. I strongly believe this providing that yocto layer would enable installation of industrial-grade linux embedded, opening doors for the use of the ZED-X in industrial or commercial IoT sectors.

A layer for the the ZED SDK a well as a layer for your ZED boxes would be greatly appreciated.
