# Using Robotics 360 Perception Kit with Jetson Thor.

**URL:** <https://community.stereolabs.com/t/using-robotics-360-perception-kit-with-jetson-thor/11358>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [May 27, 2026, 3:03pm UTC](https://community.stereolabs.com/t/using-robotics-360-perception-kit-with-jetson-thor/11358 "2026-05-27T15:03:54Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tech](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/t/a9a28c/32.png) [@tech](https://community.stereolabs.com/u/tech)\
**Post date:** [May 27, 2026, 3:03pm UTC](https://community.stereolabs.com/t/using-robotics-360-perception-kit-with-jetson-thor/11358/1 "2026-05-27T15:03:54Z")

</div>

Hi everyone,

We are currently using the [Stereolabs](https://www.stereolabs.com/) Robotics 360 Perception Kit with a Jetson AGX Orin and four ZED X cameras connected through the ZED Link Quad capture card.

For our next research setup, we are considering adding a Jetson Thor. Our current idea is to connect all four ZED X cameras to the Orin, then send the camera data or processed perception results from the Orin to the Thor for heavier real-time processing.

Has anyone tried using Jetson AGX Orin and Jetson Thor together in this way?

What would be the recommended connection method between the two devices? Would 10GbE + ROS 2 be a good approach, or is there a better architecture for handling four ZED X cameras with low latency?

Any advice or experience would be greatly appreciated.

Thank you!
