# Troubles in zed x mini with jetson orin nano and link

**URL:** <https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [September 13, 2024, 11:22am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031 "2024-09-13T11:22:51Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 13, 2024, 11:22am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/1 "2024-09-13T11:22:51Z")

</div>

i had installed the right GMSL SDK ([stereolabs](https://www.stereolabs.com/)-zedlink-duo\_1.1.0-LI-MAX96712-L4T36.3.0\_arm64.deb) and ZED SDK (ZED\_SDK\_Tegra\_L4T36.3\_v4.1.3.zstd.run).

Adnd follwing [ZED Link Duo on Orin Nano - Stereolabs](https://www.stereolabs.com/docs/get-started-with-zed-link/dual-jetson-orin-nano-devkit-setup)

I can’t connect the camera, here are my device and dmesg.

```auto
[11407.686175] zedxone_uhd 10-001a: probing v4l2 sensor.
[12104.256977] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0028 unbind
[12104.257410] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0020 unbind
[12104.257566] zedx 9-0062: ZED-X serializer successfully removed
[12104.312111] sl_max96712 9-0029: print_sensor_info: camera zedx
[12104.312142] sl_max96712 9-0029: print_sensor_info: camera zedx
[12104.312235] sl_max96712 9-0029: print_sensor_info: camera zedx
[12104.312263] sl_max96712 9-0029: print_sensor_info: camera zedx
[12104.958652] sl_max96712 9-0029: sl_max96712_get_camera_model: zedx camera connected to this port
[12104.975476] sl_max96712 9-0029: print_sensor_info: camera zedx
[12104.992188] sl_max96712 9-0029: print_sensor_info: camera zedx
[12105.328402] zedx 9-0062: Driver Version : v1.1.0
[12105.328410] zedx 9-0062: Probing v4l2 sensor.
[12105.328414] zedx 9-0062: Driver Version : v1.1.0
[12105.547494] zedx 9-0062: ZED-X serializer detect success
[12105.547707] zedx 9-0042: Driver Version : v1.1.0
[12105.547715] zedx 9-0042: Probing v4l2 sensor.
[12105.547722] zedx 9-0042: Driver Version : v1.1.0
[12105.585488] zedx 9-0042: Single ZED-X detect error
[12105.585494] zedx 9-0042: zedx_probe: serializer initialization failed
[12105.585545] zedx: probe of 9-0042 failed with error -1
[12105.585596] zedx 9-0010: Driver Version : v1.1.0
[12105.585600] zedx 9-0010: Probing v4l2 sensor.
[12105.585602] zedx 9-0010: zedx_probe: ar0234 initialization failed
[12105.585620] zedx 9-0020: Driver Version : v1.1.0
[12105.585622] zedx 9-0020: Probing v4l2 sensor.
[12105.585780] zedx 9-0020: tegracam sensor driver:video1_v2.0.6
[12105.678760] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0020 bound
[12105.680004] zedx 9-0020: Detected ZED-X sensor
[12105.680126] zedx 9-0028: Driver Version : v1.1.0
[12105.680131] zedx 9-0028: Probing v4l2 sensor.
[12105.680363] zedx 9-0028: tegracam sensor driver:video0_v2.0.6
[12105.774733] tegra-camrtc-capture-vi tegra-capture-vi: subdev zedx 9-0028 bound
[12105.775372] zedx 9-0028: Detected ZED-X sensor
[12105.775542] zedx 10-0062: Driver Version : v1.1.0

```

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [September 13, 2024, 12:44pm UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/2 "2024-09-13T12:44:20Z")

</div>

Hi @han12580  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

Can you provide information concerning the carrier board that you are using?  
Can you send pictures of your setup?

Please also run the command `sudo ZED_Diagnostic --dmesg` and send the report log that it generates.

---

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 16, 2024, 8:01am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/3 "2024-09-16T08:01:16Z")

</div>

[dmesg.log](https://community.stereolabs.com/uploads/short-url/8my6wMVKeDbRXqHJliQMM9xifrZ.log) (30.6 KB)  
ZED X mini  
jetson orin nano  
ZED link duo  
8cm 15-22 pin CSI x2  
12V DC power

---

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 16, 2024, 8:28am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/4 "2024-09-16T08:28:13Z")

</div>

![Photo_0916_1d](https://community.stereolabs.com/uploads/default/original/2X/c/cbc7f2fde07fa9dcf9cf566587eccf16c8bc8aff.jpeg)  
 ![Photo_0916_3a](https://community.stereolabs.com/uploads/default/original/2X/5/5a704ce3f198e9dc3e2d8bb41e232135e3a10137.jpeg)  
here are my devices.  
when I use the tools It always shows “cannot open camera”.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [September 16, 2024, 9:30am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/5 "2024-09-16T09:30:23Z")

</div>

Hi @han12580  
the configuration seems good to me, but I noticed something that can cause your problem: are you using a Seeed Studio carrier board or another “not NVIDIA” carrier board?

---

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 16, 2024, 12:44pm UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/6 "2024-09-16T12:44:58Z")

</div>

Hi @Myzhar  
I use the official NVIDIA jetson orin nano Developer Kit. It is so strange that I have no idea about it. When I connect the camera I can get the information about camera, like SN, but i cannot open the camera. the expolre tool switch between waiting and opening. So Strange.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [September 16, 2024, 1:16pm UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/7 "2024-09-16T13:16:10Z")

</div>

I noticed that you have a flat cable connected to the GPIO port. Did you modify the GPIO settings in some way?

---

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 16, 2024, 1:37pm UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/8 "2024-09-16T13:37:24Z")

</div>

No change. I try setting the speed of the MIPI lanes [#](https://www.stereolabs.com/docs/get-started-with-zed-link/troubleshooting#set-the-speed-of-the-mipi-lanes), but i don’t konw how to change my speed of MIPI lanes. Does any device has error? camera? zed link? the 12V 2A DC power?

---

<div class="post-metadata">

**Author:** ![han12580](https://community.stereolabs.com/user_avatar/community.stereolabs.com/han12580/32/3516_2.png) [@han12580](https://community.stereolabs.com/u/han12580)\
**Post date:** [September 17, 2024, 6:16am UTC](https://community.stereolabs.com/t/troubles-in-zed-x-mini-with-jetson-orin-nano-and-link/7031/9 "2024-09-17T06:16:10Z")

</div>

Hi @Myzhar  
I solve the problem by reflashing my jetson orin nano!!! Thanks So Much!
