# SeeedStudio Orin NX j4012 compatibility with ZedX Cameras

**URL:** <https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [August 6, 2025, 2:17pm UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626 "2025-08-06T14:17:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mattiamedinno](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/9fc29f/32.png) [@mattiamedinno](https://community.stereolabs.com/u/mattiamedinno)\
**Post date:** [August 6, 2025, 2:17pm UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626/1 "2025-08-06T14:17:07Z")

</div>

We bought two zed X cameras, connected to the Zed link Duo (GMSL2), powered through the CSI of a **reComputer Industrial J4012 with Jetson Orin™ NX 16GB.**

However, zed cameras are not detected.

jetpack 6.1.0 L4T 36.4, with zed sdk 5.0.5

I tried installing ZedX drivers from [ZED X Camera Drivers | Stereolabs](https://www.stereolabs.com/en-it/developers/drivers) , either for Zed Link Duo and Zed Box Orin Nx 16Gb, but seems not working.

NB: the outputs of

```auto
sudo dmesg | grep -i zedx  
sudo dmesg | grep -i max9x

```

show nothing

I can’t really get what is going on and what are the problem with this approach, even though I was following the official guides on your website.

---

<div class="post-metadata">

**Author:** ![hbeaumont](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/67e7ee/32.png) [@hbeaumont](https://community.stereolabs.com/u/hbeaumont)\
**Post date:** [August 7, 2025, 9:58am UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626/2 "2025-08-07T09:58:34Z")

</div>

Hi @mattiamedinno ,

Thank you for reaching us. Could you please run the ZED\_Diagnostic tool and send us the generated json file ? This will help hardware team to reproduce and debug your issue.

Best regards,

---

<div class="post-metadata">

**Author:** ![mattiamedinno](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/9fc29f/32.png) [@mattiamedinno](https://community.stereolabs.com/u/mattiamedinno)\
**Post date:** [August 7, 2025, 1:18pm UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626/3 "2025-08-07T13:18:50Z")

</div>

Attached you’ll find the zed diagnostic results, and other useful logs.

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/ooMKzVsJnRxWkcjZcfq4A1RbfRC.json) (17.1 KB)

[dmesg.log](https://community.stereolabs.com/uploads/short-url/ks4qtbPfvGIE6nnjMTMgNrSNf9h.log) (11.0 KB)

---

<div class="post-metadata">

**Author:** ![hbeaumont](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/67e7ee/32.png) [@hbeaumont](https://community.stereolabs.com/u/hbeaumont)\
**Post date:** [August 11, 2025, 10:15am UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626/4 "2025-08-11T10:15:30Z")

</div>

Hi @mattiamedinno , I asked to the hardware team and I am sorry for your use case, but we do not support Seeed yet. We will may be add this in the future, but for now I cannot give you a publishing date.  
Sorry again,

Best regards
