# SeeedStudio A603 and GMSL capture card compatibility

**URL:** <https://community.stereolabs.com/t/seeedstudio-a603-and-gmsl-capture-card-compatibility/6842>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [August 19, 2024, 10:24am UTC](https://community.stereolabs.com/t/seeedstudio-a603-and-gmsl-capture-card-compatibility/6842 "2024-08-19T10:24:36Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![mattrouss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/mattrouss/32/2452_2.png) [@mattrouss](https://community.stereolabs.com/u/mattrouss)\
**Post date:** [August 21, 2024, 4:05pm UTC](https://community.stereolabs.com/t/seeedstudio-a603-and-gmsl-capture-card-compatibility/6842/5 "2024-08-21T16:05:49Z")

</div>

Hi @akiUlysses,

We currently support the boards from the third-party suppliers listed at the bottom of our driver page: [ZED X Camera Drivers | Stereolabs](https://www.stereolabs.com/en-fr/developers/drivers)

Any carrier board that is not on this list is unfortunately not supported, as we do not have the necessary resources required to handle the development and maintenance for all capture cards/carrier boards.

In order for you to use the ZED X with another capture card/carrier board, we would gladly share the source code of the ZED X/ZED X One driver, that you can customize for your configuration, or ask a third-party integrator if you are not familiar with kernel driver development.

Please send an email at [support@stereolabs.com](mailto:support@stereolabs.com) with a reference to this post and a Github account so that I can share with you the driver code, if you are interested.

---

_[View the full topic](https://community.stereolabs.com/t/seeedstudio-a603-and-gmsl-capture-card-compatibility/6842)._
