# Running ZED X on ARK Electronics Jetson PAB.

**URL:** <https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697>\
**Category:** ZED X\
**Created:** [January 26, 2026, 10:04pm UTC](https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697 "2026-01-26T22:04:09Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cwlin](https://community.stereolabs.com/user_avatar/community.stereolabs.com/cwlin/32/5708_2.png) [@cwlin](https://community.stereolabs.com/u/cwlin)\
**Post date:** [January 26, 2026, 10:04pm UTC](https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697/1 "2026-01-26T22:04:09Z")

</div>

Hi, I am trying to have the ZED X and ZED Link duo running on ARK Electronics’ Jetson PAB.I have everything connected, but the zed diagnostic tool cannot find the camera.

The LED on the Link duo board flashes when I restart the zed x service.

I am thinking there might be some difference in the I2C address, but I am not sure.

Can some one point to the right direction?

[ARK Jetson PAB Carrier – ARK Electronics](https://arkelectron.com/product/ark-jetson-pab-carrier/?srsltid=AfmBOoprfoFIFueKJdwgQ5wMApQQA1Bk7NyjHfFg8-LRiVz8tu16TsMq)

[ARK-Electronics/ark\_jetson\_kernel: Kernel source build instructions and scripts for the ARK Jetson Carrier](https://github.com/ARK-Electronics/ark_jetson_kernel/tree/main)

Thanks

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [January 29, 2026, 11:11am UTC](https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697/2 "2026-01-29T11:11:31Z")

</div>

Hi @cwlin  
Welcome to the [StereoLabs](https://www.stereolabs.com/) community.

> [@cwlin](#):
>
> ARK Jetson PAB Carrier – ARK Electronics

Unfortunately, this board is not natively supported by our GMSL2 drivers.

Other customers tried to use it; someone could have developed a custom driver:

- [ZED Duo Capture Card Compatible with 15-15pin CSI connector? - #2 by Myzhar](https://community.stereolabs.com/t/zed-duo-capture-card-compatible-with-15-15pin-csi-connector/10117/2)
- [ZED X One stereo\_calibration script is so slow, basically unusable](https://community.stereolabs.com/t/zed-x-one-stereo-calibration-script-is-so-slow-basically-unusable/9982)

---

<div class="post-metadata">

**Author:** ![cwlin](https://community.stereolabs.com/user_avatar/community.stereolabs.com/cwlin/32/5708_2.png) [@cwlin](https://community.stereolabs.com/u/cwlin)\
**Post date:** [January 29, 2026, 1:53pm UTC](https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697/3 "2026-01-29T13:53:13Z")

</div>

Hello @Myzhar ,

Thank you for confirming. Can you share the source code for your driver so I can modify it myself?

Thanks.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [January 29, 2026, 2:42pm UTC](https://community.stereolabs.com/t/running-zed-x-on-ark-electronics-jetson-pab/10697/4 "2026-01-29T14:42:05Z")

</div>

> [@cwlin](#):
>
> Thank you for confirming. Can you share the source code for your driver so I can modify it myself?

Please write an email to [support@stereolabs.com](mailto:support@stereolabs.com) with the request.
