# \[ROS2 Wrapper\] 4 ZED2i cameras same device in docker container

**URL:** <https://community.stereolabs.com/t/ros2-wrapper-4-zed2i-cameras-same-device-in-docker-container/2246>\
**Category:** ROS2\
**Tags:** multi-camera, ros, docker, jetson\
**Created:** [March 14, 2023, 12:58pm UTC](https://community.stereolabs.com/t/ros2-wrapper-4-zed2i-cameras-same-device-in-docker-container/2246 "2023-03-14T12:58:22Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 15, 2023, 10:07am UTC](https://community.stereolabs.com/t/ros2-wrapper-4-zed2i-cameras-same-device-in-docker-container/2246/11 "2023-03-15T10:07:17Z")

</div>

The ZED 2i when connected to the USB port creates two devices:

- `2b03:f880` → UVC video module (USB3)
- `2b03:f881` → HID sensors data module (USB2)

The fact that when you connect one camera another one stops to work make me think that this is also a power issue.

@adujardin[already suggested](https://community.stereolabs.com/t/motherboard-selection/2112/4) to be sure that the expansion cards are correctly powered. Is the power configuration correct?

---

_[View the full topic](https://community.stereolabs.com/t/ros2-wrapper-4-zed2i-cameras-same-device-in-docker-container/2246)._
