# Resolution of depth computing

**URL:** <https://community.stereolabs.com/t/resolution-of-depth-computing/11443>\
**Category:** ROS2\
**Tags:** jetson, depth\
**Created:** [June 16, 2026, 3:08pm UTC](https://community.stereolabs.com/t/resolution-of-depth-computing/11443 "2026-06-16T15:08:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lin-yuxiang](https://community.stereolabs.com/user_avatar/community.stereolabs.com/lin-yuxiang/32/6036_2.png) [@lin-yuxiang](https://community.stereolabs.com/u/lin-yuxiang)\
**Post date:** [June 16, 2026, 3:08pm UTC](https://community.stereolabs.com/t/resolution-of-depth-computing/11443/1 "2026-06-16T15:08:11Z")

</div>

Hi, I am using the ros2 wrapper with setting of:

```yaml
common_stereo.yaml:
    pub_resolution: ‘CUSTOM’
    pub_downscale_factor: 2

zedx.yaml:
    grab_resolution: 'HD1200'

```

For this setup, is the depth calculated by the resolution of HD1200 then downscale to 960x600, or should it just be computed on the resolution of downscaled resolution?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [June 17, 2026, 12:56pm UTC](https://community.stereolabs.com/t/resolution-of-depth-computing/11443/2 "2026-06-17T12:56:29Z")

</div>

> [@lin-yuxiang](#):
>
> For this setup, is the depth calculated by the resolution of HD1200 then downscale to 960x600, or should it just be computed on the resolution of downscaled resolution?

When using NEURAL depth modes, the depth map is extracted at a fixed resolution, then upscaled/downscaled to the current grab resolution.  
The processing depth resolution depends on the selected model: lower resolution for NEURAL\_LIGHT, higher resolution for NEURAL\_PLUS.
