# Recovery mode problem & links are not correct

**URL:** <https://community.stereolabs.com/t/recovery-mode-problem-links-are-not-correct/8456>\
**Category:** Software\
**Tags:** sdk, jetpack, jetson\
**Created:** [March 25, 2025, 7:28pm UTC](https://community.stereolabs.com/t/recovery-mode-problem-links-are-not-correct/8456 "2025-03-25T19:28:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![harunresit](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/a6a055/32.png) [@harunresit](https://community.stereolabs.com/u/harunresit)\
**Post date:** [March 25, 2025, 7:28pm UTC](https://community.stereolabs.com/t/recovery-mode-problem-links-are-not-correct/8456/1 "2025-03-25T19:28:37Z")

</div>

Hi everyone, while i’m trying to open docker container in zed box i couldn’t manage to run it with “–runtime”, “nvidia”, argument, so after some research i thought upgrading zed box’ OS to 22.04 from 20.04 could be a good idea. However after the upgrade I found that the docker doesn’t run even without any argument, which should easily work, due to some cgroup mismatch. As you can imagine, I decided to go back and followed the link below for that: [Reset your ZED Box Orin NX - Stereolabs](https://www.stereolabs.com/docs/get-started-with-zed-box-orin-nx/reset-update). As you can understand I’m trying to downgrade and doing it with USB flash drive. My device serial number begins with GTW-ONX1 and as mentioned I experience problem while trying force recovey but the link as mentioned " [using the stardard methods](https://www.stereolabs.com/docs/get-started-with-zed-box-orin-nx/#force-the-zed-box-in-recovery-mode). ⚠" is redirecting to a completely irrelevant page. So my main problem here I can’t switch it to recovery mode and I want to donwgrade it from Ubuntu 22.04 to Ubuntu 20.04. Thanks/Best Regards

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 25, 2025, 7:52pm UTC](https://community.stereolabs.com/t/recovery-mode-problem-links-are-not-correct/8456/2 "2025-03-25T19:52:13Z")

</div>

Hi @harunresit  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

Thank you for reporting the broken link. It has already been fixed and the updated is being deployed just now

Concerning your problem. please write an email to [support@stereolabs.com](mailto:support@stereolabs.com) adding all the relevant details and logs
