# Recommendation for Carrier Board supporting 40W MAXN\_SUPER for Orin NX & ZED link Capture Card Duo?

**URL:** <https://community.stereolabs.com/t/recommendation-for-carrier-board-supporting-40w-maxn-super-for-orin-nx-zed-link-capture-card-duo/10971>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [March 6, 2026, 6:59pm UTC](https://community.stereolabs.com/t/recommendation-for-carrier-board-supporting-40w-maxn-super-for-orin-nx-zed-link-capture-card-duo/10971 "2026-03-06T18:59:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bm.ai](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/b/ee7513/32.png) [@bm.ai](https://community.stereolabs.com/u/bm.ai)\
**Post date:** [March 6, 2026, 6:59pm UTC](https://community.stereolabs.com/t/recommendation-for-carrier-board-supporting-40w-maxn-super-for-orin-nx-zed-link-capture-card-duo/10971/1 "2026-03-06T18:59:53Z")

</div>

Hi everyone,

I currently own a Jetson Orin Nano Super Developer Kit, a ZED X camera, and a ZED link Capture Card Duo.

I am looking to **upgrade my setup to a Jetson Orin NX module** and need a new carrier board. I’ve been considering the **Waveshare Jetson Orin Nano / NX Super Dual Ethernet Base Board**. You can view the exact board here: [Waveshare JETSON-ORIN-IO-BASE-B](https://www.waveshare.com/jetson-orin-io-base-b.htm).

Could anyone confirm whether this specific Waveshare carrier board is compatible with the Capture Card Duo and the ZED X when running on an Orin NX?

If this board isn’t compatible due to the CSI connector layout or other hardware constraints, could you suggest alternative third-party carrier boards for the **Orin NX** that fully support the Capture Card Duo and **explicitly support “MAXN\_SUPER”**  **power modes at 40W** for maximum performance?

Thanks in advance for any help or recommendations!

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 6, 2026, 7:17pm UTC](https://community.stereolabs.com/t/recommendation-for-carrier-board-supporting-40w-maxn-super-for-orin-nx-zed-link-capture-card-duo/10971/2 "2026-03-06T19:17:40Z")

</div>

Hi @bm.ai  
Welcome to the [StereoLabs](https://www.stereolabs.com/) community.

> [@bm.ai](#):
>
> I’ve been considering the **Waveshare Jetson Orin Nano / NX Super Dual Ethernet Base Board**. You can view the exact board here: [Waveshare JETSON-ORIN-IO-BASE-B](https://www.waveshare.com/jetson-orin-io-base-b.htm).

You cannot use WaveShare devices with our ZED Link capture card. We do not support Waveshare carrier boards.

> [@bm.ai](#):
>
> If this board isn’t compatible due to the CSI connector layout or other hardware constraints, could you suggest alternative third-party carrier boards for the **Orin NX** that fully support the Capture Card Duo and **explicitly support “MAXN\_SUPER”**  **power modes at 40W** for maximum performance?

You could contact ConnectTech or Auvidea to ask for more information concerning their products supporting the Super mode and compatible with our devices.
