# Nvbuf\_utils: dmabuf\_fd -1 mapped entry NOT found

**URL:** <https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806>\
**Category:** ZED X\
**Created:** [May 13, 2025, 5:51am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806 "2025-05-13T05:51:38Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![maheshreddy](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c0e974/32.png) [@maheshreddy](https://community.stereolabs.com/u/maheshreddy)\
**Post date:** [May 13, 2025, 5:51am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806/1 "2025-05-13T05:51:38Z")

</div>

I’m using Jetpack 5.1.2 (L4T 35.4.1) and the ZED SDK 5.0 but still I get issues with nvbuf\_utils. Detailed error:  
`**[SVO] Hardware compression (NVENC) available** nvbuf_utils: dmabuf_fd -1 mapped entry NOT found nvbuf_utils: dmabuf_fd -1 mapped entry NOT found (Argus) Error Timeout: (propagating from src/rpc/socket/client/ClientSocketManager.cpp, function send(), line 137) (Argus) Error Timeout: (propagating from src/rpc/socket/client/SocketClientDispatch.cpp, function dispatch(), line 91) (Argus) Error FileOperationFailed: Failed socket read: Connection reset by peer (in src/rpc/socket/common/SocketUtils.cpp, function readSocket(), line 79) (Argus) Error FileOperationFailed: Unexpected error in reading socket (in src/rpc/socket/client/ClientSocketManager.cpp, function recvThreadCore(), line 277) (Argus) Error FileOperationFailed: Receive worker failure, notifying 2 waiting threads (in src/rpc/socket/client/ClientSocketManager.cpp, function recvThreadCore(), line 350) (Argus) Error FileOperationFailed: Client thread received an error from socket (in src/rpc/socket/client/ClientSocketManager.cpp, function send(), line 145) (Argus) Error FileOperationFailed: (propagating from src/rpc/socket/client/SocketClientDispatch.cpp, function dispatch(), line 91) Stack trace (most recent call last) in thread 3990: #5 Object "[0xffffffffffffffff]", at 0xffffffffffffffff, in #4 Object "/usr/lib/aarch64-linux-gnu/libc.so.6", at 0xffffbab1a66b, in #3 Object "/usr/lib/aarch64-linux-gnu/libpthread.so.0", at 0xffffbbb6c623, in #2 Object "/usr/lib/aarch64-linux-gnu/tegra/libnvargus_socketclient.so", at 0xffffbcf29837, in #1 Object "/usr/lib/aarch64-linux-gnu/tegra/libnvargus_socketclient.so", at 0xffffbcf29277, in #0 Object "/usr/lib/aarch64-linux-gnu/tegra/libnvcamerautils.so", at 0xffffba1e703c, in nvcamerautils::ConditionVariable::signal() const Segmentation fault (Address not mapped to object [(nil)]) Segmentation fault (core dumped)`  
What is the fix to this?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 13, 2025, 7:12am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806/2 "2025-05-13T07:12:34Z")

</div>

Hi @maheshreddy

To assist you better, we need additional information regarding your device’s condition and system setup.

Please open a terminal console (`Ctrl+Alt+t`) and run these commands:

- `sudo ZED_Diagnostic --dmesg`
- `ZED_Diagnostic -c`

After executing the commands, kindly send me the files `dmesg.log` and `ZED_Diagnostic_Results.json` located in the folder where the commands were run.

---

<div class="post-metadata">

**Author:** ![maheshreddy](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c0e974/32.png) [@maheshreddy](https://community.stereolabs.com/u/maheshreddy)\
**Post date:** [May 13, 2025, 8:51am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806/3 "2025-05-13T08:51:23Z")

</div>

[dmesg\_1.log](https://community.stereolabs.com/uploads/short-url/jgpUMB0aOUeePUMbn6MNdpYWhjN.log) (61.5 KB)  
[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/4LEcvSKYjGhXnyqA1C94YtuatyF.json) (22.9 KB)

---

<div class="post-metadata">

**Author:** ![maheshreddy](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c0e974/32.png) [@maheshreddy](https://community.stereolabs.com/u/maheshreddy)\
**Post date:** [May 14, 2025, 5:26am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806/4 "2025-05-14T05:26:27Z")

</div>

Hey @Myzhar, I tried using with docker I no more have the nvbuf\_utils error but  
`[ZED-X][Warning] Failed to connect to zed_x_daemon.`  
How do I fix these?  
[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/wBV4VqvH5ZK89MpZ9ABoWdQobvU.json) (5.0 KB)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 14, 2025, 11:04am UTC](https://community.stereolabs.com/t/nvbuf-utils-dmabuf-fd-1-mapped-entry-not-found/8806/5 "2025-05-14T11:04:03Z")

</div>

> [@maheshreddy](#):
>
> [ZED-X][Warning] Failed to connect to zed\_x\_daemon.

This is expected with Docker because the ZED X Daemon runs on the host.
