# Is it possible to perform re-focusing and calibration?

**URL:** <https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856>\
**Category:** ZED X\
**Tags:** multi-camera, calibration\
**Created:** [November 19, 2026, 6:46am UTC](https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856 "2026-11-19T06:46:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sekiwada0](https://community.stereolabs.com/user_avatar/community.stereolabs.com/sekiwada0/32/6589_2.png) [@sekiwada0](https://community.stereolabs.com/u/sekiwada0)\
**Post date:** [November 19, 2026, 6:46am UTC](https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856/1 "2026-11-19T06:46:30Z")

</div>

Dear support tem,  
I am using a ZED X Mini, with firmware version 2001.  
I intend to perform multi-camera calibration using two ZED cameras and ChArUco markers.  
The images captured at a distance of 2500 mm from the markers were blurry.  
Is it possible to adjust the focus and then re-run the calibration process?

 ![tmp0](https://community.stereolabs.com/uploads/default/original/2X/a/aa5e0f551ff2d4d463de0ab13dd0694907e88a90.png)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [November 19, 2026, 3:36pm UTC](https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856/2 "2026-11-19T15:36:09Z")

</div>

> [@sekiwada0](#):
>
> Is it possible to adjust the focus and then re-run the calibration process?

Unfortunately, this is not possible.

Can you send me a screenshoot from ZED Explorer to compare the focus of both lenses?
