# IMU rate is not stable on ZED-X

**URL:** <https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977>\
**Category:** ROS2\
**Tags:** jetson\
**Created:** [March 7, 2026, 8:30pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977 "2026-03-07T20:30:18Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 7, 2026, 8:30pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/1 "2026-03-07T20:30:18Z")

</div>

Hi,  
I collected a SVO at 60hz, when I publish the IMU, its all over the place rather than being 200 hz

jetson5@jetson5:~$ ros2 topic hz /zed/zed\_node/imu/data\_raw --window 200  
WARNING: topic [/zed/zed\_node/imu/data\_raw] does not appear to be published yet  
average rate: 140.944  
min: 0.000s max: 0.095s std dev: 0.01240s window: 144  
average rate: 147.153  
min: 0.000s max: 0.094s std dev: 0.01107s window: 200  
average rate: 146.419  
min: 0.000s max: 0.095s std dev: 0.01102s window: 200  
average rate: 159.635  
min: 0.000s max: 0.097s std dev: 0.01104s window: 200  
average rate: 156.046  
min: 0.000s max: 0.092s std dev: 0.01026s window: 200  
average rate: 153.565  
min: 0.000s max: 0.094s std dev: 0.01214s window: 200  
average rate: 155.754  
min: 0.000s max: 0.094s std dev: 0.01196s window: 200  
average rate: 147.448  
min: 0.000s max: 0.097s std dev: 0.01219s window: 200  
average rate: 142.785  
min: 0.000s max: 0.097s std dev: 0.01370s window: 200  
average rate: 149.882  
min: 0.000s max: 0.094s std dev: 0.01225s window: 200  
average rate: 143.311  
min: 0.000s max: 0.094s std dev: 0.01366s window: 200  
average rate: 145.530  
min: 0.000s max: 0.093s std dev: 0.01341s window: 200  
average rate: 149.512  
min: 0.000s max: 0.094s std dev: 0.01217s window: 200  
average rate: 139.039  
min: 0.000s max: 0.094s std dev: 0.01341s window: 200  
average rate: 144.051  
min: 0.000s max: 0.094s std dev: 0.01150s window: 200  
average rate: 153.913  
min: 0.000s max: 0.094s std dev: 0.01155s window: 200  
average rate: 154.659  
min: 0.000s max: 0.093s std dev: 0.01190s window: 200  
average rate: 143.501  
min: 0.000s max: 0.093s std dev: 0.01250s window: 200  
average rate: 154.576  
min: 0.000s max: 0.093s std dev: 0.01134s window: 200  
average rate: 134.959  
min: 0.000s max: 0.086s std dev: 0.01349s window: 200  
average rate: 142.139  
min: 0.000s max: 0.094s std dev: 0.01304s window: 200  
average rate: 155.763  
min: 0.000s max: 0.094s std dev: 0.01175s window: 200  
average rate: 150.004  
min: 0.000s max: 0.094s std dev: 0.01173s window: 200  
average rate: 159.955  
min: 0.000s max: 0.095s std dev: 0.01166s window: 200  
average rate: 158.214  
min: 0.000s max: 0.095s std dev: 0.01074s window: 200  
average rate: 148.953  
min: 0.000s max: 0.093s std dev: 0.01192s window: 200  
average rate: 151.321  
min: 0.000s max: 0.094s std dev: 0.01199s window: 200  
average rate: 146.640  
min: 0.000s max: 0.094s std dev: 0.01198s window: 200  
average rate: 157.064  
min: 0.000s max: 0.092s std dev: 0.01040s window: 200  
average rate: 142.941  
min: 0.000s max: 0.094s std dev: 0.01198s window: 200  
average rate: 145.537  
min: 0.000s max: 0.094s std dev: 0.01325s window: 200  
average rate: 155.549  
min: 0.000s max: 0.093s std dev: 0.01196s window: 200  
average rate: 147.410  
min: 0.000s max: 0.092s std dev: 0.01332s window: 200  
average rate: 141.260  
min: 0.000s max: 0.091s std dev: 0.01325s window: 200  
average rate: 146.438  
min: 0.000s max: 0.095s std dev: 0.01220s window: 200  
average rate: 140.699  
min: 0.000s max: 0.094s std dev: 0.01367s window: 200  
average rate: 142.611  
min: 0.000s max: 0.094s std dev: 0.01358s window: 200  
average rate: 154.006  
min: 0.000s max: 0.094s std dev: 0.01209s window: 200  
average rate: 140.612  
min: 0.000s max: 0.094s std dev: 0.01368s window: 200  
average rate: 146.107  
min: 0.000s max: 0.094s std dev: 0.01232s window: 200  
average rate: 144.749  
min: 0.000s max: 0.094s std dev: 0.01362s window: 200  
average rate: 146.444  
min: 0.000s max: 0.094s std dev: 0.01325s window: 200  
average rate: 141.382  
min: 0.000s max: 0.093s std dev: 0.01300s window: 200  
average rate: 150.557  
min: 0.000s max: 0.088s std dev: 0.01150s window: 200  
average rate: 141.330  
min: 0.000s max: 0.084s std dev: 0.01256s window: 200  
average rate: 147.759  
min: 0.000s max: 0.097s std dev: 0.01219s window: 200  
average rate: 156.252  
min: 0.000s max: 0.095s std dev: 0.01208s window: 200  
average rate: 158.135  
min: 0.000s max: 0.094s std dev: 0.01180s window: 200  
average rate: 161.817  
min: 0.000s max: 0.093s std dev: 0.01042s window: 200  
average rate: 140.543  
min: 0.000s max: 0.094s std dev: 0.01327s window: 200  
average rate: 140.520  
min: 0.000s max: 0.093s std dev: 0.01332s window: 200  
average rate: 161.838  
min: 0.000s max: 0.094s std dev: 0.01206s window: 200  
average rate: 145.951  
min: 0.000s max: 0.091s std dev: 0.01214s window: 200  
average rate: 148.728  
min: 0.000s max: 0.093s std dev: 0.01198s window: 200  
average rate: 149.808  
min: 0.000s max: 0.090s std dev: 0.01166s window: 200  
average rate: 152.425  
min: 0.000s max: 0.095s std dev: 0.01199s window: 200  
average rate: 147.813  
min: 0.000s max: 0.094s std dev: 0.01314s window: 200  
average rate: 144.322  
min: 0.000s max: 0.093s std dev: 0.01324s window: 200  
average rate: 140.085  
min: 0.000s max: 0.094s std dev: 0.01330s window: 200  
average rate: 142.158  
min: 0.000s max: 0.094s std dev: 0.01312s window: 200  
average rate: 142.033  
min: 0.000s max: 0.094s std dev: 0.01320s window: 200  
average rate: 150.433  
min: 0.000s max: 0.094s std dev: 0.01188s window: 200  
average rate: 144.195  
min: 0.000s max: 0.094s std dev: 0.01359s window: 200  
average rate: 153.137  
min: 0.000s max: 0.092s std dev: 0.01178s window: 200  
average rate: 162.511  
min: 0.000s max: 0.091s std dev: 0.01043s window: 200  
average rate: 137.199  
min: 0.000s max: 0.095s std dev: 0.01476s window: 200  
average rate: 148.247  
min: 0.000s max: 0.092s std dev: 0.01275s window: 200  
average rate: 153.334  
min: 0.000s max: 0.095s std dev: 0.01227s window: 200  
average rate: 150.876  
min: 0.000s max: 0.095s std dev: 0.01234s window: 200  
average rate: 150.235  
min: 0.000s max: 0.094s std dev: 0.01219s window: 200  
average rate: 147.092  
min: 0.000s max: 0.092s std dev: 0.01116s window: 200  
average rate: 1.538  
min: 0.000s max: 128.662s std dev: 9.07448s window: 200  
average rate: 1.539  
min: 0.000s max: 128.662s std dev: 9.07452s window: 200  
average rate: 152.923  
min: 0.000s max: 0.094s std dev: 0.01073s window: 200  
average rate: 142.440  
min: 0.000s max: 0.094s std dev: 0.01205s window: 200  
average rate: 148.400  
min: 0.000s max: 0.098s std dev: 0.01233s window: 200  
average rate: 144.234  
min: 0.000s max: 0.098s std dev: 0.01280s window: 200  
average rate: 156.841  
min: 0.000s max: 0.089s std dev: 0.01132s window: 200  
average rate: 154.635  
min: 0.000s max: 0.095s std dev: 0.01219s window: 200  
average rate: 149.423  
min: 0.000s max: 0.095s std dev: 0.01057s window: 200  
average rate: 145.319  
min: 0.000s max: 0.083s std dev: 0.01011s window: 200  
average rate: 141.204  
min: 0.000s max: 0.092s std dev: 0.01273s window: 200  
average rate: 156.632  
min: 0.000s max: 0.092s std dev: 0.01115s window: 200  
average rate: 152.166  
min: 0.000s max: 0.095s std dev: 0.01202s window: 200  
average rate: 159.183  
min: 0.000s max: 0.019s std dev: 0.00698s window: 200  
average rate: 142.846  
min: 0.000s max: 0.018s std dev: 0.00758s window: 200  
average rate: 141.522  
min: 0.000s max: 0.018s std dev: 0.00764s window: 200  
average rate: 144.890  
min: 0.000s max: 0.019s std dev: 0.00772s window: 200  
average rate: 146.786  
min: 0.000s max: 0.019s std dev: 0.00768s window: 200  
average rate: 144.510  
min: 0.000s max: 0.021s std dev: 0.00769s window: 200  
average rate: 145.510  
min: 0.000s max: 0.021s std dev: 0.00774s window: 200  
average rate: 133.218  
min: 0.000s max: 0.083s std dev: 0.01009s window: 200  
average rate: 126.794  
min: 0.000s max: 0.083s std dev: 0.01232s window: 200  
average rate: 153.027  
min: 0.000s max: 0.088s std dev: 0.01177s window: 200  
average rate: 149.613  
min: 0.000s max: 0.083s std dev: 0.01117s window: 200  
average rate: 138.158  
min: 0.000s max: 0.085s std dev: 0.01276s window: 200  
average rate: 153.552  
min: 0.000s max: 0.087s std dev: 0.01149s window: 200  
average rate: 137.600  
min: 0.000s max: 0.099s std dev: 0.01383s window: 200  
average rate: 148.905  
min: 0.000s max: 0.088s std dev: 0.01181s window: 200  
average rate: 143.089  
min: 0.000s max: 0.093s std dev: 0.01243s window: 200  
average rate: 146.501  
min: 0.000s max: 0.091s std dev: 0.01307s window: 200  
average rate: 137.181  
min: 0.000s max: 0.094s std dev: 0.01369s window: 200  
average rate: 136.510  
min: 0.000s max: 0.094s std dev: 0.01491s window: 200  
average rate: 149.128  
min: 0.000s max: 0.088s std dev: 0.01271s window: 200  
average rate: 144.126  
min: 0.000s max: 0.086s std dev: 0.01219s window: 200  
average rate: 142.077  
min: 0.000s max: 0.089s std dev: 0.01236s window: 200  
average rate: 128.940  
min: 0.000s max: 0.098s std dev: 0.01392s window: 200  
average rate: 150.500  
min: 0.000s max: 0.082s std dev: 0.01062s window: 200  
average rate: 134.306  
min: 0.000s max: 0.098s std dev: 0.01310s window: 200  
average rate: 135.280  
min: 0.000s max: 0.098s std dev: 0.01484s window: 200  
average rate: 147.147  
min: 0.000s max: 0.094s std dev: 0.01202s window: 200  
average rate: 131.017  
min: 0.000s max: 0.094s std dev: 0.01339s window: 200  
average rate: 141.346  
min: 0.000s max: 0.094s std dev: 0.01243s window: 200  
average rate: 148.313  
min: 0.000s max: 0.081s std dev: 0.01073s window: 200  
average rate: 141.336  
min: 0.000s max: 0.066s std dev: 0.01096s window: 200  
average rate: 139.991  
min: 0.000s max: 0.074s std dev: 0.01136s window: 200  
average rate: 152.080  
min: 0.000s max: 0.086s std dev: 0.01138s window: 200  
average rate: 140.369  
min: 0.000s max: 0.092s std dev: 0.01247s window: 200  
average rate: 123.865  
min: 0.000s max: 0.092s std dev: 0.01622s window: 200  
average rate: 140.675  
min: 0.000s max: 0.092s std dev: 0.01391s window: 200  
average rate: 140.291  
min: 0.000s max: 0.090s std dev: 0.01362s window: 200  
average rate: 153.475  
min: 0.000s max: 0.088s std dev: 0.01122s window: 200  
average rate: 143.311  
min: 0.000s max: 0.095s std dev: 0.01376s window: 200  
average rate: 135.695  
min: 0.000s max: 0.091s std dev: 0.01466s window: 200  
average rate: 131.510  
min: 0.000s max: 0.090s std dev: 0.01521s window: 200  
average rate: 137.967  
min: 0.000s max: 0.090s std dev: 0.01464s window: 200  
average rate: 152.875  
min: 0.000s max: 0.091s std dev: 0.01228s window: 200  
average rate: 140.669  
min: 0.000s max: 0.089s std dev: 0.01232s window: 200  
average rate: 149.046  
min: 0.000s max: 0.092s std dev: 0.01185s window: 200  
average rate: 150.117  
min: 0.000s max: 0.090s std dev: 0.01176s window: 200  
average rate: 147.990  
min: 0.000s max: 0.084s std dev: 0.01154s window: 200  
average rate: 149.388  
min: 0.000s max: 0.094s std dev: 0.01235s window: 200  
average rate: 143.502  
min: 0.000s max: 0.094s std dev: 0.01300s window: 200

how to resolve it?  
Thanks!

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 9, 2026, 8:58am UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/2 "2026-03-09T08:58:34Z")

</div>

How di you record the SVO?  
Have you checked the IMU frequency using other tools, e.g. [ZED Sensor Viewer](https://www.stereolabs.com/docs/development/zed-tools/zed-sensor-viewer)?

---

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 9, 2026, 1:47pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/3 "2026-03-09T13:47:55Z")

</div>

Hi

This is how I recorded the SVO at 60 FPS

```auto
########################################################################

Copyright (c) 2022, STEREOLABS.

All rights reserved.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

“AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

########################################################################
import sys
import pyzed.sl as sl
from signal import signal, SIGINT
import argparse
import os

cam = sl.Camera()

#Handler to deal with CTRL+C properly
def handler(signal_received, frame):
cam.disable_recording()
cam.close()
sys.exit(0)

signal(SIGINT, handler)

def main(opt):
init = sl.InitParameters()
init.depth_mode = sl.DEPTH_MODE.NONE # Set configuration parameters for the ZED
init.camera_fps = opt.fps # Set the framerate from argument
init.async_image_retrieval = False; # This parameter can be used to record SVO in camera FPS even if the grab loop is running at a lower FPS (due to compute for ex.)

status = cam.open(init) 
if status > sl.ERROR_CODE.SUCCESS: 
    print("Camera Open", status, "Exit program.")
    exit(1)
    
recording_param = sl.RecordingParameters(opt.output_svo_file, sl.SVO_COMPRESSION_MODE.H265) # Enable recording with the filename specified in argument
err = cam.enable_recording(recording_param)
if err != sl.ERROR_CODE.SUCCESS:
    print("Recording ZED : ", err)
    exit(1)

runtime = sl.RuntimeParameters()
print(f"SVO is Recording at {opt.fps} FPS, use Ctrl-C to stop.") # Start recording SVO, stop with Ctrl-C command
frames_recorded = 0

while True:
    if cam.grab(runtime) <= sl.ERROR_CODE.SUCCESS : # Check that a new image is successfully acquired
        frames_recorded += 1
        print("Frame count: " + str(frames_recorded), end="\r")

if name == “main”:
parser = argparse.ArgumentParser()
parser.add_argument(‘–output_svo_file’, type=str, help=‘Path to the SVO file that will be written’, required=True)
parser.add_argument(‘–fps’, type=int, help=‘Camera framerate (e.g. 15, 30, 60, 100)’, default=30)
opt = parser.parse_args()
if not opt.output_svo_file.endswith((“.svo”, “.svo2”)):
print("–output_svo_file parameter should be a .svo file but is not : ", opt.output_svo_file, “Exit program.”)
exit()
main(opt)

```

The Zed\_Sensor\_Viewer says that accel, gyro, orientation and temp are at 189 Hz and not 200 Hz

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 10, 2026, 10:46am UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/4 "2026-03-10T10:46:23Z")

</div>

Are you using the Jetson in MAXN mode with `jetsonclocks` running when you record the SVO files?

---

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 11, 2026, 5:15pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/5 "2026-03-11T17:15:30Z")

</div>

Hi, yes, all the data is recorded with the MAXN setting

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 11, 2026, 5:36pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/6 "2026-03-11T17:36:08Z")

</div>

Is the Jetson performing other tasks while recording the SVO file?  
Is depth enabled?  
Is `jetsonclocks` running?

---

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 11, 2026, 5:43pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/7 "2026-03-11T17:43:13Z")

</div>

Hi, only the above script is running, collecting the SVO. Jetson clocks runs on each bootup and depth was not enabled.

---

<div class="post-metadata">

**Author:** ![mattrouss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/mattrouss/32/2452_2.png) [@mattrouss](https://community.stereolabs.com/u/mattrouss)\
**Post date:** [March 16, 2026, 5:16pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/8 "2026-03-16T17:16:16Z")

</div>

Hi @hey_you,

Can you confirm that you are using the latest ZED SDK 5.2.2 and ZED X Driver 1.4.1, as well as using this sample when recording? [zed-sdk/recording/recording/single camera at master · stereolabs/zed-sdk · GitHub](https://github.com/stereolabs/zed-sdk/tree/master/recording/recording/single%20camera)

Can you share the result of this small diagnostic tool as well  
[zed\_svo\_diagnostic.zip](https://community.stereolabs.com/uploads/short-url/i2ebY3ROKy46Eh0xtXCSualcoE0.zip) (5.3 KB)

---

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 16, 2026, 5:19pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/9 "2026-03-16T17:19:17Z")

</div>

> [@mattrouss](#):
>
> ZED SDK 5.2.2 and ZED X Driver 1.4.1

Hi,  
I was using ZED SDK 5.2.1 and ZED X Driver 1.4.1. The site for data collection is 4 hours away, and for low-rate reasons, I won’t be able to use any of the collected data for testing purposes.

Thanks

---

<div class="post-metadata">

**Author:** ![mattrouss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/mattrouss/32/2452_2.png) [@mattrouss](https://community.stereolabs.com/u/mattrouss)\
**Post date:** [March 17, 2026, 9:00am UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/10 "2026-03-17T09:00:47Z")

</div>

Hi @hey_you,

The issue can either happen during recording, or replaying the data. To pinpoint what the issue is, we would need to make sure this is not a software issue. Please let me know once you are able to use the tools samples I’ve shared, as these have been validated internally in our test benches to provide 200Hz IMU recording on the latest ZED SDK version 5.2.2.

---

<div class="post-metadata">

**Author:** ![hey\_you](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/h/77aa72/32.png) [@hey\_you](https://community.stereolabs.com/u/hey_you)\
**Post date:** [March 18, 2026, 3:53pm UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/11 "2026-03-18T15:53:50Z")

</div>

will let you know, once I am able to test it

Thanks!

---

<div class="post-metadata">

**Author:** ![Tanaykedia](https://community.stereolabs.com/user_avatar/community.stereolabs.com/tanaykedia/32/6525_2.png) [@Tanaykedia](https://community.stereolabs.com/u/Tanaykedia)\
**Post date:** [October 5, 2026, 7:09am UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/12 "2026-10-05T07:09:47Z")

</div>

worth separating the measurement from the node too. at 200 hz `ros2 topic hz` (python) can read low and bursty on its own, and min 0.000s looks like messages arriving in batches. i wrote ros2\_pulse, which you LD\_PRELOAD into the zed wrapper process. it counts publishes on imu/data\_raw from inside the node, no subscriber. if that says ~200 the drop is in hz or transport, if it says ~140 the wrapper really publishes at 140, which points back at recording vs replay like mattrouss said. [GitHub - TanayK07/ros2\_pulse: Near-zero-overhead ROS 2 topic/node frequency probe (inter + intra process) via an LD\_PRELOAD tracetools shim. · GitHub](https://github.com/TanayK07/ros2_pulse)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 5, 2026, 10:26am UTC](https://community.stereolabs.com/t/imu-rate-is-not-stable-on-zed-x/10977/13 "2026-10-05T10:26:24Z")

</div>

Hi @Tanaykedia  
Welcome to the [StereoLabs](https://www.stereolabs.com/) community.

Thank you for your tool, looks really interesting.
