# improvment of Zed X 2.2mm in no light scenaios

**URL:** <https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671>\
**Category:** ZED X\
**Created:** [August 26, 2026, 8:45am UTC](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671 "2026-08-26T08:45:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jai](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/5f9b8f/32.png) [@Jai](https://community.stereolabs.com/u/Jai)\
**Post date:** [August 26, 2026, 8:45am UTC](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671/1 "2026-08-26T08:45:06Z")

</div>

Hey everyone,

I’m currently developing an autonomous UGV intended primarily for nighttime and low/zero-light operations. I’m using a **[Stereolabs](https://www.stereolabs.com/) ZED X (2.2mm wide-angle lens)** as the primary vision sensor for depth estimation and VIO/SLAM.

Because the ZED X is a passive stereo camera, performance in total darkness is a major concern due to feature starvation and high sensor noise from auto-exposure gain.

I’m evaluating the best hardware setup to make passive stereo viable in complete darkness and would love your input on two main options:

1. **Active Texture / Pseudo-Random Pattern Projector (NIR / 850nm or 940nm):**

2. **Visible LED Floodlights / Diffused Spot Illumination:**

**Questions for the community:**

- Has anyone successfully run passive stereo / ZED X in pitch-black outdoor conditions? What illumination setup worked best for you?

- If using a pattern projector, did you need external synchronization/strobing to avoid motion blur or frame-rate drops?

- Does a high-CRI diffused LED floodlight perform better than structured light once range exceeds 5–10 meters on a wide-angle lens?

- Are there alternative sensor-fusion approaches you’d recommend (e.g., thermal stereo, 2D/3D LiDAR assist, or IMU-heavy VIO tuning) for dark environments?

Any advice, hardware recommendations, or lessons learned would be greatly appreciated!

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![Jai](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/5f9b8f/32.png) [@Jai](https://community.stereolabs.com/u/Jai)\
**Post date:** [August 27, 2026, 4:13am UTC](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671/2 "2026-08-27T04:13:44Z")

</div>

@Myzhar hey could you please help me with the above mentioned problem.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [August 28, 2026, 10:29am UTC](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671/3 "2026-08-28T10:29:55Z")

</div>

Hi @Jai  
Welcome to the [StereoLabs](https://www.stereolabs.com/) community.

> [@Jai](#):
>
> I’m currently developing an autonomous UGV intended primarily for nighttime and low/zero-light operations.

This is a challenging operating conditions for our cameras because they do not have active projectors. Passive stereo vision requires visual features to extract depth information, even when using AI.

> [@Jai](#):
>
> Because the ZED X is a passive stereo camera, performance in total darkness is a major concern due to feature starvation and high sensor noise from auto-exposure gain.

This is the point.

> [@Jai](#):
>
> Active Texture / Pseudo-Random Pattern Projector (NIR / 850nm or 940nm):

This is not feasible. All the ZED cameras are provided with IR filters to avoid sunlight saturation (reddish image issue), so these frequencies of IR light are blocked.

> [@Jai](#):
>
> Visible LED Floodlights / Diffused Spot Illumination:

This is the only working solution. We recommend using diffused light, not spot light.

> [@Jai](#):
>
> Has anyone successfully run passive stereo / ZED X in pitch-black outdoor conditions? What illumination setup worked best for you?

Customers working in full dark conditions use diffused LED ligths.  
It’s important that the FoV of the camera is homogeneously illuminated to not create unwanted depth artifacts.

> [@Jai](#):
>
> If using a pattern projector, did you need external synchronization/strobing to avoid motion blur or frame-rate drops?

This is a good practice. ZED Link capture cards provide strobo signals:

- [ZED Link Mono GPIO Triggering | StereoLabs](https://docs.stereolabs.com/docs/products/embedded/zed-link-capture-card/zed-link-mono/zed-link-mono-gpio-triggering)
- [ZED Link Duo GPIO Triggering | StereoLabs](https://docs.stereolabs.com/docs/products/embedded/zed-link-capture-card/zed-link-duo/zed-link-duo-gpio-triggering)
- [ZED Link Quad GPIO Triggering | StereoLabs](https://docs.stereolabs.com/docs/products/embedded/zed-link-capture-card/zed-link-quad/zed-link-quad-gpio-triggering)

> [@Jai](#):
>
> Does a high-CRI diffused LED floodlight perform better than structured light once range exceeds 5–10 meters on a wide-angle lens?

This performs better in any case.
