# How to fabricate my own cables for the ZED X

**URL:** <https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008>\
**Category:** ZED X\
**Created:** [May 14, 2024, 6:35pm UTC](https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008 "2024-05-14T18:35:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mau\_ve](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@mau\_ve](https://community.stereolabs.com/u/mau_ve)\
**Post date:** [May 14, 2024, 6:35pm UTC](https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008/1 "2024-05-14T18:35:58Z")

</div>

Hi, can someone point me out on the direction of how to fabricate my own cables for the Zed X?  
Do Zed work with preferred suppliers for coax cable, FAKRA connectors, and tools?

Can I use any coaxial cable as long as it fits the FAKRA connector on the Zed and Capture card?  
Is the max supported distance between the ZED X and Capture card limited to 15 meters? Can it go further?

How about Waterproof connectors for the Zed X?  
I would like to use these on extreme environments, water, cold, heat, dust, vibration, etc…

Are these FAKRA connectors used by the Zed X waterproof?

Thank you for the information!

---

<div class="post-metadata">

**Author:** ![mau\_ve](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@mau\_ve](https://community.stereolabs.com/u/mau_ve)\
**Post date:** [May 22, 2024, 4:27pm UTC](https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008/2 "2024-05-22T16:27:26Z")

</div>

Any one has a recommendation for FAKRA and Coax cables suppliers for the Zed X?

---

<div class="post-metadata">

**Author:** ![multicore-manticore](https://community.stereolabs.com/user_avatar/community.stereolabs.com/multicore-manticore/32/1656_2.png) [@multicore-manticore](https://community.stereolabs.com/u/multicore-manticore)\
**Post date:** [May 24, 2024, 12:40am UTC](https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008/3 "2024-05-24T00:40:53Z")

</div>

I am running with these cables. I assume others work too.

[https://www.digikey.co.nz/en/products/detail/amphenol-rf/095FJZFPZAHM500/13536006](https://www.digikey.co.nz/en/products/detail/amphenol-rf/095FJZFPZAHM500/13536006)

---

<div class="post-metadata">

**Author:** ![mau\_ve](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/c5a1d2/32.png) [@mau\_ve](https://community.stereolabs.com/u/mau_ve)\
**Post date:** [October 29, 2024, 10:29pm UTC](https://community.stereolabs.com/t/how-to-fabricate-my-own-cables-for-the-zed-x/6008/4 "2024-10-29T22:29:47Z")

</div>

Thank you for the reference.  
I would like to make my custom length cables.

As I understand Amphenol sells these FAKRA Z connectors, and all the tools needed.

Anyone knows the specification for fe coaxial cables used for the Zed?

Thanks!
