# GMSL2 Cables Don't Fit

**URL:** <https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877>\
**Category:** ZED X\
**Created:** [May 22, 2025, 2:21pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877 "2025-05-22T14:21:06Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![robots](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/r/48db29/32.png) [@robots](https://community.stereolabs.com/u/robots)\
**Post date:** [May 22, 2025, 2:21pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/1 "2025-05-22T14:21:06Z")

</div>

I’ve purchased multiple [Robotics 360° Perception Kit](https://community.stereolabs.com/t/how-to-use-the-360-perception-kit/7680) and [GMSL2 1-to-4 Female-to-Male Fakra Cable | Stereolabs](https://www.stereolabs.com/store/products/gmsl2-1-to-4-fakra-cable). On the most recent batches I have been unable to physically plug in the 1M-4F cable into the quad link card. I have tried across 4 Fakra cables and 2 link cards. None of my colleagues have been able to connect it either - even when applying up to ~30lb of force.

 ![image](https://community.stereolabs.com/uploads/default/original/2X/1/1458b33151684175a9e4dbca2c9f1b0080726b25.jpeg)  
 ![image](https://community.stereolabs.com/uploads/default/original/2X/b/b28b9768cdb8c2d2b44866b1aff28cd3f42332e6.jpeg)  
 ![image](https://community.stereolabs.com/uploads/default/original/2X/4/44e1fc1c181e831f40e4de1d8d4d46c3d83b82eb.jpeg)  
 ![image](https://community.stereolabs.com/uploads/default/original/2X/6/699153aa05a4fd29b4ed647ada7b068915923404.jpeg)  
 ![image](https://community.stereolabs.com/uploads/default/original/2X/4/4d4a53a0b30b2982cbced2b2713eaffebb184eeb.jpeg)

Am I ordering the wrong cables or could there be some tolerance issues in the latest batch? Our best guess is the pin holes on the adapter cable are too tight. This question feels silly, but I can’t figure out what we’re doing wrong.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 22, 2025, 2:47pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/2 "2025-05-22T14:47:24Z")

</div>

Hi @robots  
Please write an email to [support@stereolabs.com](mailto:support@stereolabs.com)  
Our team will investigate the cause of your issue.

---

<div class="post-metadata">

**Author:** ![system](https://community.stereolabs.com/uploads/default/original/2X/7/703c26fe16845a046a5c896e226e5f728ea313a0.svg) [@system](https://community.stereolabs.com/u/system)\
**Post date:** [May 22, 2025, 3:41pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/3 "2025-05-22T15:41:14Z")

</div>

Hi,

Thanks for your email.

We have identified an issue between our cable and the capture card.  
It appears that the pins on this batch are too small, making it impossible to properly connect the cable.

We sincerely apologize for the inconvenience and are doing everything we can to resolve this issue as quickly as possible.

Sincerely,

Damien  
Orders & Shipping  
[Stereolabs](https://www.stereolabs.com/) Support

---

<div class="post-metadata">

**Author:** ![robots](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/r/48db29/32.png) [@robots](https://community.stereolabs.com/u/robots)\
**Post date:** [May 22, 2025, 4:12pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/4 "2025-05-22T16:12:11Z")

</div>

Thank you for the quick response. We have identified 6 problematic cables so far.

1. 4x from order 33962 placed by [matt@picklerobot.com](mailto:matt@picklerobot.com)
2. 2x from order 33675 placed by [ariana@picklerobot.com](mailto:ariana@picklerobot.com)

We have also ordered 2 cables from an alternate vendor ([https://www.digikey.com/en/products/detail/amphenol-rf/095-820-199M200/24814137?gad\_source=1&gad\_campaignid=20232005509&gbraid=0AAAAADrbLlj-DK02\_w3xAdH7Ouvvvpj8N&gclid=Cj0KCQjwlrvBBhDnARIsAHEQgOS11PKBkrRvVlCG3W53B2AsVgVQxASXW3F7A4QUA8-lvOJYTJLjEAgaAsQmEALw\_wcB&gclsrc=aw.ds](https://www.digikey.com/en/products/detail/amphenol-rf/095-820-199M200/24814137?gad_source=1&gad_campaignid=20232005509&gbraid=0AAAAADrbLlj-DK02_w3xAdH7Ouvvvpj8N&gclid=Cj0KCQjwlrvBBhDnARIsAHEQgOS11PKBkrRvVlCG3W53B2AsVgVQxASXW3F7A4QUA8-lvOJYTJLjEAgaAsQmEALw_wcB&gclsrc=aw.ds)) as this is a blocking issue for us at the time where we are investigating the ZedX cameras for our next product. Do you have any estimate of when a working batch will be ready to ship? Not expecting exact dates, but it’d help us to know if this will take a few weeks or a few months to resolve.

Also are there any cables from a known good batch that could be shipped to us? Even 2 working cables would unblock lots of our work as we’re planning to install 6-8 cameras per system.

Best,  
Matt Pearce

---

<div class="post-metadata">

**Author:** ![robots](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/r/48db29/32.png) [@robots](https://community.stereolabs.com/u/robots)\
**Post date:** [May 22, 2025, 4:17pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/5 "2025-05-22T16:17:39Z")

</div>

Could you also clarify if the issue is with the cable or the capture card?

Thank you for the quick response. We have identified 6 problematic cables so far.

1. 4x from order 33962 placed by [matt@picklerobot.com](mailto:matt@picklerobot.com)
2. 2x from order 33675 placed by [ariana@picklerobot.com](mailto:ariana@picklerobot.com)

We have also ordered 2 cables from an alternate vendor ([https://www.digikey.com/en/products/detail/amphenol-rf/095-820-199M200/24814137?gad\_source=1&gad\_campaignid=20232005509&gbraid=0AAAAADrbLlj-DK02\_w3xAdH7Ouvvvpj8N&gclid=Cj0KCQjwlrvBBhDnARIsAHEQgOS11PKBkrRvVlCG3W53B2AsVgVQxASXW3F7A4QUA8-lvOJYTJLjEAgaAsQmEALw\_wcB&gclsrc=aw.ds](https://www.digikey.com/en/products/detail/amphenol-rf/095-820-199M200/24814137?gad_source=1&gad_campaignid=20232005509&gbraid=0AAAAADrbLlj-DK02_w3xAdH7Ouvvvpj8N&gclid=Cj0KCQjwlrvBBhDnARIsAHEQgOS11PKBkrRvVlCG3W53B2AsVgVQxASXW3F7A4QUA8-lvOJYTJLjEAgaAsQmEALw_wcB&gclsrc=aw.ds)) as this is a blocking issue for us at the time where we are investigating the ZedX cameras for our next product. Do you have any estimate of when a working batch will be ready to ship? Not expecting exact dates, but it’d help us to know if this will take a few weeks or a few months to resolve.

Also are there any cables from a known good batch that could be shipped to us? Even 2 working cables would unblock lots of our work as we’re planning to install 6-8 cameras per system.

Best,  
Matt Pearce

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [May 22, 2025, 4:17pm UTC](https://community.stereolabs.com/t/gmsl2-cables-dont-fit/8877/6 "2025-05-22T16:17:41Z")

</div>

Hi @robots  
Please send the information by email to [support@stereolabs.com](mailto:support@stereolabs.com) for a quick resolution of the problem
