# Does Zedbox mini support MAXN\_MODE and MAXN\_SUPER?

**URL:** <https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664>\
**Category:** Hardware\
**Tags:** jetson\
**Created:** [August 12, 2025, 7:37am UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664 "2025-08-12T07:37:07Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pepsipower](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/p/977dab/32.png) [@pepsipower](https://community.stereolabs.com/u/pepsipower)\
**Post date:** [August 12, 2025, 7:37am UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664/1 "2025-08-12T07:37:07Z")

</div>

Hello,

I am using the ZEDBOX Orin NX 16GB for our project. Our algorithm and logic currently run in **MAXN\_MODE** , as I was informed that the ZEDBOX Orin NX does not support **MAXN\_SUPER** mode because of COTS peri board.

> [@Jetpack 6.1 or 6.2 flash for zebox orin NX 16gb](https://community.stereolabs.com/t/jetpack-6-1-or-6-2-flash-for-zebox-orin-nx-16gb/8161/5):
>
> Hi again @Myzhar, Thank you for the quick answer slight_smile This sounds perfect! Will the script also enable MAXN SUPER and/or "25W REFERENCE POWER MODES?

I would like to confirm whether the ZEDBOX Mini supports both **MAXN\_MODE** and **MAXN\_SUPER** mode, provided that our system can maintain the SoC temperature within safe limits?

Thank you for your support.

---

<div class="post-metadata">

**Author:** ![mattrouss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/mattrouss/32/2452_2.png) [@mattrouss](https://community.stereolabs.com/u/mattrouss)\
**Post date:** [August 12, 2025, 4:12pm UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664/2 "2025-08-12T16:12:32Z")

</div>

Hi @pepsipower,

I can confirm that the ZED Box Mini _ **does not** _ support the MAXN\_SUPER mode as it was not designed to support the higher temperature safely.

---

<div class="post-metadata">

**Author:** ![pepsipower](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/p/977dab/32.png) [@pepsipower](https://community.stereolabs.com/u/pepsipower)\
**Post date:** [August 19, 2025, 2:54am UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664/3 "2025-08-19T02:54:53Z")

</div>

Thank you for the confirmation.

---

<div class="post-metadata">

**Author:** ![pepsipower](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/p/977dab/32.png) [@pepsipower](https://community.stereolabs.com/u/pepsipower)\
**Post date:** [August 25, 2025, 8:54am UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664/4 "2025-08-25T08:54:44Z")

</div>

I’ve just powered up a brand new Zedbox Mini and noticed the **Power Mode** option in the GUI. I was able to choose among the following modes:

- 0: MAXN SUPER

- 1: 10W

- 2: 15W

- 3: 25W

- 4: 40W

As you mentioned, the Zedbox Mini does not support **MAXN SUPER** , but it does support **MAXN MODE**. However, I couldn’t find an option to select MAXN MODE. Should I re-flash the Zedbox Mini?

---

<div class="post-metadata">

**Author:** ![mattrouss](https://community.stereolabs.com/user_avatar/community.stereolabs.com/mattrouss/32/2452_2.png) [@mattrouss](https://community.stereolabs.com/u/mattrouss)\
**Post date:** [August 25, 2025, 1:48pm UTC](https://community.stereolabs.com/t/does-zedbox-mini-support-maxn-mode-and-maxn-super/9664/5 "2025-08-25T13:48:09Z")

</div>

Hi @pepsipower ,

Yes I would recommend flashing the box following these instructions, the flash procedure sets up the nvpmodels with a MAXN mode.

> **[Flash your ZED Box Mini - Stereolabs](https://www.stereolabs.com/docs/embedded/zed-box-mini/reset-update)**
>
> Should I flash my ZED Box Mini? # The ZED Box Mini is shipped with a pre-configured operating system and drivers optimized for its hardware.
