# Disabling IMU on GMSL ZED X / X One

**URL:** <https://community.stereolabs.com/t/disabling-imu-on-gmsl-zed-x-x-one/11815>\
**Category:** Software\
**Tags:** sdk\
**Created:** [October 26, 2026, 4:32pm UTC](https://community.stereolabs.com/t/disabling-imu-on-gmsl-zed-x-x-one/11815 "2026-10-26T16:32:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![corentinartaud](https://community.stereolabs.com/user_avatar/community.stereolabs.com/corentinartaud/32/5938_2.png) [@corentinartaud](https://community.stereolabs.com/u/corentinartaud)\
**Post date:** [October 26, 2026, 4:32pm UTC](https://community.stereolabs.com/t/disabling-imu-on-gmsl-zed-x-x-one/11815/1 "2026-10-26T16:32:33Z")

</div>

Can the IMU be disabled on GMSL ZED X / X One if it is unused?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 26, 2026, 10:47pm UTC](https://community.stereolabs.com/t/disabling-imu-on-gmsl-zed-x-x-one/11815/2 "2026-10-26T22:47:40Z")

</div>

Hi @corentinartaud,  
Welcome to the [StereoLabs](https://www.stereolabs.com/) community.

> [@corentinartaud](#):
>
> Can the IMU be disabled on GMSL ZED X / X One if it is unused?

No, the IMU of the [ZED X](https://www.stereolabs.com/products/zed-x) and the [ZED X One](https://www.stereolabs.com/products/zed-x-one) cannot be disabled; it is always powered and running at the hardware level, and its data stream is handled by the ZED X Driver and the ZED SDK with negligible overhead.

If you do not need inertial data, simply do not call `getSensorsData`, and set [`PositionalTrackingParameters::enable_imu_fusion`](https://www.stereolabs.com/docs/api/structsl_1_1PositionalTrackingParameters.html) to `false` if you use Positional Tracking without the IMU contribution.

More details about the sensors module are available in the [online documentation](https://www.stereolabs.com/docs/sensors).

Can you share the reason why you want to disable it? This will help me suggest the best configuration for your use case.

---

<div class="post-metadata">

**Author:** ![colorfulcms](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/c/8491ac/32.png) [@colorfulcms](https://community.stereolabs.com/u/colorfulcms)\
**Post date:** [October 27, 2026, 4:21pm UTC](https://community.stereolabs.com/t/disabling-imu-on-gmsl-zed-x-x-one/11815/3 "2026-10-27T16:21:37Z")

</div>

If the worry is CPU load or power draw, it may be worth measuring before assuming the IMU is the cause. As Myzhar says, it only produces data that nothing reads unless you call getSensorsData, so the cost should be small. If you also use positional tracking, turning off IMU fusion lets you compare tracking quality and CPU usage with and without it. A quick look at tegrastats or top with and without the sensors calls would show whether there is any real difference on your setup. If you can share what you are trying to save, such as latency, power or CPU, people here can probably suggest something more specific.
