# Dead Pixels across ZED cameras

**URL:** <https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821>\
**Category:** Hardware\
**Created:** [October 27, 2026, 10:59pm UTC](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821 "2026-10-27T22:59:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![s.ven](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/s/839c29/32.png) [@s.ven](https://community.stereolabs.com/u/s.ven)\
**Post date:** [October 27, 2026, 10:59pm UTC](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821/1 "2026-10-27T22:59:58Z")

</div>

Hello,

I’ve noticed that there are pixels on every one of our cameras that has some artifact that resembles a dead / stuck pixel.

**Example images:**

 ![Screenshot 2026-10-27 at 3.41.33 PM](https://community.stereolabs.com/uploads/default/original/2X/e/eadfa1e72491dd3b2efa5a2d49a859e0a288ec81.jpeg)

 ![Screenshot 2026-10-27 at 3.44.29 PM](https://community.stereolabs.com/uploads/default/original/2X/0/0a3260be75774808daf289a8cd4d26026bc36576.jpeg)

 ![Screenshot 2026-10-27 at 3.43.43 PM](https://community.stereolabs.com/uploads/default/original/2X/2/2d9370fa0823f15c6fdacb1757a8ffd40ed0e482.jpeg)

These pixels are usually white, sometimes red. It is not noise, as they remain in the same spot in the image across power cycles and even in well-lit environments.

**Backstory:**

I’ve tried many different combinations of capture cards, cameras, SDK versions, etc. Factory calibrations are present and used. Some of these capture cards are brand new, some of these cameras are brand new (for example our ZED X One S), yet no matter which configuration we have, we always see these “dead” pixels.

**What We’ve Done:**

- Tweak **every** possible setting (ie. auto exposure, auto gain, FPS, resolution)
- Experiment in high and low lighting environments
- Reseat the capture cards
- Change 4-1 Fakra wires
- Change between different ZED X Minis, ZED X 4K’s, different ZED X One S’.
- Change capture cards (multiple duos, multiple quads)
- Have a single vs multiple cameras connected
- Save images vs using ZED\_Explorer directly
- See if temperature was affecting how many of these “dead” pixels we see.
- Ensured the lens is clear

**Notes:**

We use the default power cable from Nvidia to power our Jetson AGX Orin 64gb dev kit and follow all mounting instructions from [Stereolabs](https://www.stereolabs.com/) for the capture cards.

Has anyone seen this before / is this a known issue or accepted?

**Cameras** : ZED X One 4K, ZED X ONE S (wide), ZED X MINI (4mm)

**Capture Cards** : Quad, Duo

**SDK Versions** : 5.0.7, 5.4.1, 5.5.1

**Jetpack** : 6.2.1 (L4T 36.4.4)

**Factory Calibration:**

```auto
[CAM_FHD1200]
fx=459.1515889785598
fy=459.121726585473
cx=958.81073051658
cy=603.6656314455588

[CAM_FHD]
fx=459.1515889785598
fy=459.121726585473
cx=958.81073051658
cy=543.66563144556

[CAM_SVGA]
fx=229.57579448928
fy=229.56086329274
cx=479.40536525829
cy=301.83281572278

[DISTO]
k1=0.07025877298616764
k2=0.007032183875637834
k3=-0.0022965599263144788
k4=-0.00028069517501942
k5=0
k6=0
p1=0
p2=0

[MISC]
Sensor_ID=1

```

**Diagnostic File:**

```auto
{
"AI Models": {
"info": [
"MULTI CLASS DETECTION is not optimized",
"MULTI CLASS MEDIUM DETECTION is not optimized",
"MULTI CLASS ACCURATE DETECTION is not optimized",
"HUMAN BODY FAST DETECTION is not optimized",
"HUMAN BODY MEDIUM DETECTION is not optimized",
"HUMAN BODY ACCURATE DETECTION is not optimized",
"HUMAN BODY 38 FAST DETECTION is not optimized",
"HUMAN BODY 38 MEDIUM DETECTION is not optimized",
"HUMAN BODY 38 ACCURATE DETECTION is not optimized",
"PERSON HEAD DETECTION is not optimized",
"PERSON HEAD ACCURATE DETECTION is not optimized",
"REID ASSOCIATION is not optimized",
"NEURAL LIGHT DEPTH is not optimized",
"NEURAL DEPTH is not optimized",
"NEURAL PLUS DEPTH is not optimized",
"NEURAL DEPTH INT8 is not optimized"
]
},
"CUDA Operations": {
"cudaDeviceCount": 1,
"cudaDriverVersion": 12060,
"cudaDriverVersionString": "12.6",
"cudaGetDeviceCountResult": 0,
"cudaRuntimeLoaded": true,
"cudaRuntimeVersion": 12060,
"cudaRuntimeVersionString": "12.6",
"cudaTestVersion": "1.0",
"gpuTests": [
{
"clockRateMHz": 1300,
"computeCapability": "8.7",
"computeCapabilityMajor": 8,
"computeCapabilityMinor": 7,
"freeResult": 0,
"freeSuccess": true,
"gpuId": 0,
"gpuName": "Orin",
"mallocResult": 0,
"mallocSuccess": true,
"memcpyD2HResult": 0,
"memcpyD2HSuccess": true,
"memcpyH2DResult": 0,
"memcpyH2DSuccess": true,
"memoryBusWidthBits": 256,
"memoryClockRateMHz": 1300,
"memsetResult": 0,
"memsetSuccess": true,
"multiProcessorCount": 16,
"pciBusId": 0,
"pciDeviceId": 0,
"pciDomainId": 0,
"setDeviceResult": 0,
"testElements": 1048576,
"testPassed": true,
"testSizeBytes": 4194304,
"totalGlobalMemMB": 62839,
"validationPassed": true
}
],
"testSizeMB": 1,
"valid": [
"GPU 0 (Orin): CUDA operations working correctly"
]
},
"GMSL DRIVER": {
"GMSL driver": "ii stereolabs-zedlink-quad 1.4.4-SL-MAX96712-L4T36.4.0 arm64 NVIDIA Kernel DTB Modified Package by Stereolabs\n"
},
"Graphics Card": {
"deviceCount": 1,
"deviceDriverVersion": 12060,
"devices": [
{
"arch": "Ampere",
"computeCapability": "8.7",
"cores": 2048,
"name": "Orin",
"totalMemoryBytes": "65891651584",
"totalMemoryMB": 62839.17578125
}
],
"glx_info": "",
"initResult": 0,
"valid": [
"Graphics card: Orin"
]
},
"Log Kernel Trace (for ZED X)": {
"dmesg": {
"DMESG [DTS] LOG ": [
"dmesg: read kernel buffer failed: Operation not permitted"
],
"DMESG [MAX9x] LOG": [
"dmesg: read kernel buffer failed: Operation not permitted"
],
"DMESG [PCA] LOG ": [
"dmesg: read kernel buffer failed: Operation not permitted"
],
"DMESG [ZEDX] LOG": [
"dmesg: read kernel buffer failed: Operation not permitted"
],
"DTB list SLabs": [
"board.py",
"extlinux.py",
"fio.py",
"Headers",
"Jetson",
"Linux",
"pycache",
"Utils",
"zlconfig"
],
"DTB list original": [
"/boot/dtb/kernel_tegra234-p3737-0000+p3701-0005-nv.dtb"
],
"Dpkg list Stereolabs": [
"ii stereolabs-zedlink-quad 1.4.4-SL-MAX96712-L4T36.4.0 arm64 NVIDIA Kernel DTB Modified Package by Stereolabs"
],
"Dpkg list zed": [
],
"Driver list": {
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max9295/sl_max9295.ko": "exists",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max9296/max9296.ko": "not found",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max9296/sl_max9296.ko": "not found",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max96712/max96712.ko": "not found",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/max96712/sl_max96712.ko": "exists",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedone4k/sl_zedxone_uhd.ko": "exists",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedx/max96712.ko": "not found",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedx/sl_zedx.ko": "exists",
"/usr/lib/modules/5.15.148-tegra/kernel/drivers/stereolabs/zedxpro/sl_zedxpro.ko": "not found"
},
"EXTlinux file": [
"TIMEOUT 30",
"DEFAULT Stereolabs",
"MENU TITLE L4T boot options",
"LABEL primary",
" MENU LABEL primary kernel",
" LINUX /boot/Image",
" INITRD /boot/initrd",
" APPEND ${cbootargs} root=PARTUUID=ef05a66d-bdb8-4a82-aebb-a826d50e69d8 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 video=efifb:off console=tty0 ",
"# When testing a custom kernel, it is recommended that you create a backup of",
"# the original kernel and add a new entry to this file so that the device can",
"# fallback to the original kernel. To do this:",
"#",
"# 1, Make a backup of the original kernel",
"# sudo cp /boot/Image /boot/Image.backup",
"#",
"# 2, Copy your custom kernel into /boot/Image",
"#",
"# 3, Uncomment below menu setting lines for the original kernel",
"#",
"# 4, Reboot",
"# LABEL backup",
"# MENU LABEL backup kernel",
"# LINUX /boot/Image.backup",
"# INITRD /boot/initrd",
"# APPEND ${cbootargs}",
"LABEL Stereolabs",
"\tMENU LABEL Stereolabs kernel",
"\tLINUX /boot/Image",
"\tFDT /boot/dtb/kernel_tegra234-p3737-0000+p3701-0005-nv.dtb",
"\tINITRD /boot/initrd",
"\tAPPEND ${cbootargs} root=PARTUUID=ef05a66d-bdb8-4a82-aebb-a826d50e69d8 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 video=efifb:off console=tty0",
"\tOVERLAYS /boot/tegra234-p3737-camera-zedlink-quad-sl-overlay.dtbo"
],
"I2C Trace list": {
"I2C Trace /dev/i2C-0": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: UU -- -- -- -- -- UU -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: -- -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-1": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: UU -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: UU UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: -- -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-10": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-11": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-12": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- 28 -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-13": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- 18 19 UU -- UU -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- ",
"30: UU -- -- -- -- -- -- -- UU -- -- UU 3c -- -- -- ",
"40: -- -- -- -- UU -- -- -- -- 49 -- UU 4c -- -- -- ",
"50: -- -- -- -- 54 55 -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- UU -- -- -- -- 68 69 -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-14": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-15": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-16": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- ",
"20: -- -- -- -- -- -- -- -- 28 -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-2": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-3": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: -- -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-6": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: -- -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-7": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: -- -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-8": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: -- -- -- -- -- -- -- -- -- -- UU -- UU -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- ",
"30: UU -- -- -- -- -- -- -- UU -- -- UU -- -- -- -- ",
"40: -- -- -- -- UU -- -- -- -- -- -- UU -- -- -- -- ",
"50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"60: -- -- -- UU -- -- -- -- -- -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
],
"I2C Trace /dev/i2C-9": [
" 0 1 2 3 4 5 6 7 8 9 a b c d e f",
"00: -- -- -- -- -- -- -- -- ",
"10: UU -- -- -- -- -- -- -- 18 -- -- -- -- -- -- -- ",
"20: -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- ",
"30: -- -- -- -- -- -- -- -- -- -- -- UU 3c -- -- -- ",
"40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ",
"50: -- -- -- -- -- -- 56 57 -- -- -- -- -- -- -- -- ",
"60: -- -- -- -- -- -- UU -- 68 -- -- -- -- -- -- -- ",
"70: UU -- -- -- -- -- -- -- "
]
},
"Jetpack": [
"# R36 (release), REVISION: 4.4, GCID: 41062509, BOARD: generic, EABI: aarch64, DATE: Mon Jun 16 16:07:13 UTC 2025",
"# KERNEL_VARIANT: oot",
"TARGET_USERSPACE_LIB_DIR=nvidia",
"TARGET_USERSPACE_LIB_DIR_PATH=usr/lib/aarch64-linux-gnu/nvidia"
],
"Linux_uname": [
"Linux walle-orin 5.15.148-tegra #1 SMP PREEMPT Mon Jun 16 08:24:48 PDT 2025 aarch64 aarch64 aarch64 GNU/Linux"
],
"ZED SDK Version": {
"Diag": "5.5.1",
"RT": "5.5.1"
},
"ZEDX Daemon Status LS": [
"● zed_x_daemon.service - ZED-X Daemon service",
" Loaded: loaded (/etc/systemd/system/zed_x_daemon.service; enabled; vendor preset: enabled)",
" Active: active (running) since Thu 1970-01-01 00:00:56 UTC; 56 years 9 months ago",
" Main PID: 3246 (ZEDX_Daemon)",
" Tasks: 5 (limit: 74765)",
" Memory: 1.3M",
" CPU: 4.614s",
" CGroup: /system.slice/zed_x_daemon.service",
" └─3246 /usr/sbin/ZEDX_Daemon",
"Jan 01 00:00:56 walle-orin systemd[1]: Started ZED-X Daemon service."
],
"ZEDX Driver State": [
"sl_zedxone_uhd 40960 0",
"sl_zedx 36864 1",
"sl_zedxhdr 24576 0",
"sl_max9295 16384 3 sl_zedxhdr,sl_zedxone_uhd,sl_zedx",
"sl_max96712 36864 4 sl_zedxhdr,sl_zedxone_uhd,sl_max9295,sl_zedx",
"tegra_camera 217088 13 nvhost_isp5,nvhost_nvcsi_t194,sl_zedxhdr,sl_zedxone_uhd,nv_hawk_owl,nvhost_vi5,sl_zedx",
"videodev 249856 11 v4l2_async,sl_zedxhdr,videobuf2_v4l2,tegra_camera,sl_zedxone_uhd,videobuf2_common,sl_zedx"
],
"i2C Trace": [
"i2c-0\ti2c \t3160000.i2c \tI2C adapter",
"i2c-1\ti2c \tc240000.i2c \tI2C adapter",
"i2c-2\ti2c \t3180000.i2c \tI2C adapter",
"i2c-3\ti2c \t3190000.i2c \tI2C adapter",
"i2c-4\ti2c \tTegra BPMP I2C adapter \tI2C adapter",
"i2c-5\ti2c \t31b0000.i2c \tI2C adapter",
"i2c-6\ti2c \t31c0000.i2c \tI2C adapter",
"i2c-7\ti2c \tc250000.i2c \tI2C adapter",
"i2c-8\ti2c \t31e0000.i2c \tI2C adapter",
"i2c-9\ti2c \ti2c-2-mux (chan_id 0) \tI2C adapter",
"i2c-10\ti2c \ti2c-2-mux (chan_id 1) \tI2C adapter",
"i2c-11\ti2c \ti2c-2-mux (chan_id 2) \tI2C adapter",
"i2c-12\ti2c \ti2c-2-mux (chan_id 3) \tI2C adapter",
"i2c-13\ti2c \ti2c-8-mux (chan_id 0) \tI2C adapter",
"i2c-14\ti2c \ti2c-8-mux (chan_id 1) \tI2C adapter",
"i2c-15\ti2c \ti2c-8-mux (chan_id 2) \tI2C adapter",
"i2c-16\ti2c \ti2c-8-mux (chan_id 3) \tI2C adapter",
"i2c-17\ti2c \tNVIDIA SOC i2c adapter 0 \tI2C adapter"
]
}
},
"Processor": {
"L4T version": "36.4.4",
"OS": "Ubuntu 22.04.5 LTS ",
"avxSupported": false,
"coreCount": "12",
"cpu": " ARMv8 Processor rev 1 (v8l)",
"datetime": "2026-10-26 11:09:17 PM",
"hyperThreading": "0",
"motherboard": "Jetson, NVIDIA",
"platform": "NVIDIA Jetson (L4T)",
"ramCapacity": "65.891652",
"ramUsage": "",
"ramUsed": "18.709217",
"threadCount": "12",
"valid": [
"Processor: ARMv8 Processor rev 1 (v8l)",
"Motherboard: Jetson, NVIDIA"
]
},
"USB Camera": {
"CorruptedFirmware": [
],
"GMSL driver": [
],
"GMSLList": [
{
"Serial": "302077685",
"id": 0,
"path": "/dev/i2c-9",
"state": "Available"
},
{
"Serial": "57570010",
"Sub Model": "ZED-XG Mini",
"id": 1,
"path": "/dev/i2c-13",
"state": "Available"
},
{
"Serial": "314450192",
"Sub Model": "ZED-XG Mini",
"id": 2,
"path": "/dev/i2c-13",
"state": "Available"
},
{
"Serial": "57570010",
"id": 1,
"path": "/dev/i2c-13",
"state": "Available"
},
{
"Serial": "314450192",
"id": 2,
"path": "/dev/i2c-13",
"state": "Available"
}
],
"InternalDevicesCount (GMSL)": [
],
"InternalDevicesCount (USB)": [
],
"USBList": [
{
"USB_path": "/3",
"idProduct": "0x0420",
"idVendor": "0x0bda"
},
{
"USB_path": "/4/3",
"idProduct": "0x9091",
"idVendor": "0x1199"
},
{
"USB_path": "/4/1",
"idProduct": "0xea70",
"idVendor": "0x10c4"
},
{
"USB_path": "/4",
"idProduct": "0x5420",
"idVendor": "0x0bda"
},
{
"USB_path": "/3",
"idProduct": "0x3549",
"idVendor": "0x13d3"
}
],
"ZEDCount": [
],
"ZEDs": [
]
},
"ZED SDK": {
"CUDA Toolkit version": "V12.6.68 -->located in /usr/local/cuda-12.6/bin/nvcc",
"CUDA loading": false,
"GPU Driver Version": "Driver Version : 540.4.0",
"GPU Performance": " Performance State : N/A",
"ZED SDK Version (Diag)": "5.5.1",
"ZED SDK Version (RT)": "5.5.1",
"ai": {
"checkAI": true,
"cudaVersion": 12060,
"tensorVersion": 100300
},
"binFiles": [
"libsl_ai.so",
"libsl_zed.so"
],
"resourcesFiles": [
"neural_depth_5.3.model",
"neural_depth_5.3.model2",
"neural_depth_light_5.2.model",
"neural_depth_light_5.3.model2"
],
"resourcesFilesExpected": [
"objects_performance_3.2"
],
"valid": [
"ZED SDK version: 5.5.1",
"CUDA version: V12.6.68"
]
}
}

```

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 29, 2026, 2:10pm UTC](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821/2 "2026-10-29T14:10:37Z")

</div>

Hi @s.ven,

> Has anyone seen this before / is this a known issue or accepted?

Yes, this is known and accepted. Isolated defective (hot or stuck) pixels can be present on the image sensor from production, and can also appear during the lifetime of the camera. They should not affect depth, positional tracking, or object detection results. A sensor is considered defective only when there is a cluster of 2 or more adjacent defective pixels; in that case, please write to [support@stereolabs.com](mailto:support@stereolabs.com) with the camera serial number and a ZED\_Explorer image showing the cluster.

The sensor of the [ZED X Mini](https://www.stereolabs.com/store/products/zed-x-mini-stereo-camera) and the [ZED X One](https://www.stereolabs.com/products/zed-x-one) S/GS also supports a runtime dead pixel correction. It is disabled by default because, with exposure values very close to the frame time, it can create flickering. For a ZED X One S:

```auto
sudo i2cset -y -f <bus> 0x10 0x31 0xe1 0x0F i

```

`<bus>` is the number in the `path` reported for the camera in the `GMSLList` section of your diagnostic file, for example `9` for `/dev/i2c-9`. The command does not apply to the ZED X One 4K, which uses a different sensor. For the ZED X Mini, both sensors must be configured; let me know if you want to test it and I’ll share the addresses for your configuration.

---

<div class="post-metadata">

**Author:** ![s.ven](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/s/839c29/32.png) [@s.ven](https://community.stereolabs.com/u/s.ven)\
**Post date:** [October 29, 2026, 4:24pm UTC](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821/3 "2026-10-29T16:24:50Z")

</div>

Thank you @Myzhar. The defects do not appear as clusters larger than 1 pixel in the cases we have seen so far.
