# Crash with a ZED-X-One stereo rig

**URL:** <https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315>\
**Category:** ZED X\
**Tags:** jetson\
**Created:** [March 12, 2025, 9:29am UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315 "2025-03-12T09:29:23Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![matanj](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/9d8465/32.png) [@matanj](https://community.stereolabs.com/u/matanj)\
**Post date:** [March 12, 2025, 9:29am UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/1 "2025-03-12T09:29:23Z")

</div>

Hi,  
We are having an issue with the Zed X one.

While streaming 2 Zed X One cameras by the Media server and opening the virtual camera by the Zed Depth Viewer, any depth mode different than Performance mode makes the entire setup crash and shutdown.

We are using Hardware which is somewhat similar to the ZED BOX:  
Jetson Orin NX 16gb  
Jetson Orin Dev kit carrier board  
Capture Card Duo  
We use two 8cm MIPI cables (the crashes occur also with 4cm cables).

Regarding the SW, we use:  
L4t 35.3.1  
SDK 4.2.5  
Driver 1.2.2 for Duo  
[SN100655726.conf](https://community.stereolabs.com/uploads/short-url/uMCQjq7aaSKcL6HpjWdHBbXJfBC.conf) (1.3 KB)  
[virtual\_xone\_config.json](https://community.stereolabs.com/uploads/short-url/oRdkYCKMHpBIfD8Ivvc4JnFtAiM.json) (119 Bytes)

Attached also the virtual camera json file and generated calibration file.

Can you please help with any insights that may resolve the problem?  
Many thanks

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 12, 2025, 10:41am UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/2 "2025-03-12T10:41:26Z")

</div>

> [@matanj](#):
>
> While streaming 2 Zed X One cameras by the Media server and opening the virtual camera by the Zed Depth Viewer, any depth mode different than Performance mode makes the entire setup crash and shutdown.

Please run `ZED_Diagnostic` and send the report file that it generates.

Did you upgrade the ZED SDK to v4.2.5?

---

<div class="post-metadata">

**Author:** ![matanj](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/9d8465/32.png) [@matanj](https://community.stereolabs.com/u/matanj)\
**Post date:** [March 12, 2025, 12:35pm UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/3 "2025-03-12T12:35:19Z")

</div>

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/gxqyzWEFpDoTSktp6z1trfwoR2p.json) (4.8 KB)  
Thanks for your rapid reply.  
The SDK version is 4.2.5.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 13, 2025, 12:03pm UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/4 "2025-03-13T12:03:52Z")

</div>

Everything seems OK.  
Are you using the Jetson in MAX N power mode with the `jetson_clocks` script running?

---

<div class="post-metadata">

**Author:** ![matanj](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/m/9d8465/32.png) [@matanj](https://community.stereolabs.com/u/matanj)\
**Post date:** [March 13, 2025, 2:31pm UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/5 "2025-03-13T14:31:29Z")

</div>

We use the MAX N mode but do not run the `jetson_clocks` script… Should we run it?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [March 13, 2025, 5:16pm UTC](https://community.stereolabs.com/t/crash-with-a-zed-x-one-stereo-rig/8315/6 "2025-03-13T17:16:26Z")

</div>

Yes, you should maximize the performance of your Jetson
