# Capture card and zed X not detected

**URL:** <https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898>\
**Category:** ZED X\
**Created:** [April 2, 2024, 10:16am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898 "2024-04-02T10:16:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![vijayreddysamula](https://community.stereolabs.com/user_avatar/community.stereolabs.com/vijayreddysamula/32/2780_2.png) [@vijayreddysamula](https://community.stereolabs.com/u/vijayreddysamula)\
**Post date:** [April 2, 2024, 10:16am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898/1 "2024-04-02T10:16:59Z")

</div>

Hi [Stereolabs](https://www.stereolabs.com/) community,  
I have a Jetson orin 32 GB development kit flashed with Jetpack 5.1.2. I have flashed on eMMC. I have installed ZED SDK 4.0.8 and Corresponding ZEDX Drivers. But i cannot access the capture card or ZED X camera after installing everything.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [April 2, 2024, 10:20am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898/2 "2024-04-02T10:20:00Z")

</div>

Hi @vijayreddysamula  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

Please run the command `sudo ZED_Diagnostic --dmesg` and send the `dmseg.log` report file that it generates to [support@stereolabs.com](mailto:support@stereolabs.com)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [April 2, 2024, 10:32am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898/3 "2024-04-02T10:32:11Z")

</div>

Hi Vijay,  
thanks for the pictures.  
I noticed that you are using the Quad GMSL2 capture card.  
The driver that you downloaded from the website does not support it yet, the new drivers will be released in the next few days,

Meantime, you can use this beta version: [https://drive.google.com/file/d/14z2yEHM2W3v7rDg\_CkOk1IPGSwa0YjFl/view?usp=drive\_link](https://drive.google.com/file/d/14z2yEHM2W3v7rDg_CkOk1IPGSwa0YjFl/view?usp=drive_link)  
Please install it and reboot the Jetson to access your ZED X camera.

Best regards,

Walter

**Walter Lucetti**  
_Senior Computer Engineer_  
SDK / Robotics / HW  
[Stereolabs](https://www.stereolabs.com/) Support

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [April 2, 2024, 10:34am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898/4 "2024-04-02T10:34:03Z")

</div>

Vijay,  
I also just noted that you did not connect the power cable to the capture card (J10).  
The ZED Link Quad requires external 9V-19V to work correctly.

Best regards

Walter

**Walter Lucetti**  
_Senior Computer Engineer_  
SDK / Robotics / HW  
[Stereolabs](https://www.stereolabs.com/) Support

---

<div class="post-metadata">

**Author:** ![vijayreddysamula](https://community.stereolabs.com/user_avatar/community.stereolabs.com/vijayreddysamula/32/2780_2.png) [@vijayreddysamula](https://community.stereolabs.com/u/vijayreddysamula)\
**Post date:** [April 8, 2024, 9:24am UTC](https://community.stereolabs.com/t/capture-card-and-zed-x-not-detected/4898/5 "2024-04-08T09:24:55Z")

</div>

Hi Walter,  
Thank you for the help. Everything is working fine.
