# Cannot Initialize the Camera

**URL:** <https://community.stereolabs.com/t/cannot-initialize-the-camera/10174>\
**Category:** ZED X\
**Created:** [October 17, 2025, 9:02am UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174 "2025-10-17T09:02:33Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Julen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@Julen](https://community.stereolabs.com/u/Julen)\
**Post date:** [October 17, 2025, 9:02am UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/1 "2025-10-17T09:02:33Z")

</div>

Good Evening,

I am using a Jetson AGX Orin Dev Kit (64 Gb) with a dual stereo and four cameras connected.

ZED Explorer -a detects all cameras, but when trying to open the cameras with ZED\_Depth Viewer or ZED\_Explorer,it opens the first, but with the second it fails. I get:

```bash
[ZED][ERROR] [ZED] Cannot initialize the camera.   
nvbuf_utils: dmabuf_fd -1 mapped entry NOT found 
nvbuf_utils: dmabuf_fd -1 mapped entry NOT found 

```

Attached the Diagnosis files

[dmesg.log](https://community.stereolabs.com/uploads/short-url/dIi7glblRfshPw7exw57PgGWbOO.log) (84.0 KB)

[ZED\_Diagnostic\_Results.json](https://community.stereolabs.com/uploads/short-url/94ek6Dqi67a53sz1dCEmJR0kdnK.json) (23.6 KB)

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 17, 2025, 3:15pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/2 "2025-10-17T15:15:23Z")

</div>

Hi @Julen  
Welcome to the [Stereolabs](https://www.stereolabs.com/) community.

You are using 4 ZED X cameras connected to a ZED Link Duo capture card.  
The problem could be caused by the fact that both ZED Explorer and ZED Depth Viewer are trying to open the cameras at 60 FPS in HD resolution, which is not supported for this configuration as explained here:

> **[ZED Link capture cards - Stereolabs](https://www.stereolabs.com/docs/embedded/zed-link#multi-camera-combinations)**
>
> If you recently purchased a Stereolabs ZED Link GMSL2 capture card, congratulations! This guide aims to help you become acquainted with the GMSL2 protocol and to give you the essential information you …

---

<div class="post-metadata">

**Author:** ![Julen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@Julen](https://community.stereolabs.com/u/Julen)\
**Post date:** [October 17, 2025, 3:16pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/3 "2025-10-17T15:16:06Z")

</div>

Do you have a suggestion on how can I debug the situation?

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 17, 2025, 3:17pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/4 "2025-10-17T15:17:59Z")

</div>

You could try to launch the multi-camera example

> **[zed-sdk/depth sensing/multi camera at master · stereolabs/zed-sdk](https://github.com/stereolabs/zed-sdk/tree/master/depth%20sensing/multi%20camera)**
>
> ⚡️The spatial perception framework for rapidly building smart robots and spaces - stereolabs/zed-sdk

---

<div class="post-metadata">

**Author:** ![Julen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@Julen](https://community.stereolabs.com/u/Julen)\
**Post date:** [October 17, 2025, 3:30pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/5 "2025-10-17T15:30:23Z")

</div>

The error seems to persist when running the multi\_camera example:

`tmr-user@ubuntu:~/code/zed-sdk/depth sensing/multi camera/python$ python multi_camera.py`  
`Running…`  
`Opening ZED 55289125`  
`[2025-10-17 15:23:51 UTC][ZED][INFO] Logging level INFO`  
`[2025-10-17 15:23:51 UTC][ZED][INFO] [Init] Depth mode: NEURAL`  
`[2025-10-17 15:23:55 UTC][ZED][INFO] [Init] Camera FW version: 2001`  
`[2025-10-17 15:23:55 UTC][ZED][INFO] [Init] Video mode: HD1080@30`  
`[2025-10-17 15:23:55 UTC][ZED][INFO] [Init] Serial Number: S/N 55289125`  
`Optimized model not found, trying to download it…`  
`[2025-10-17 15:23:57 UTC][ZED][INFO] Please wait while the AI model is being optimized for your graphics card`  
`This operation will be run only once and may take a few minutes`  
`Optimizing neural_depth_5.3 | 100.0% [===================>] ETA: 0min 0s`  
`Opening ZED 47395504`  
`[2025-10-17 15:28:43 UTC][ZED][INFO] Logging level INFO`  
`[2025-10-17 15:28:44 UTC][ZED][INFO] [Init] Depth mode: NEURAL`  
`[2025-10-17 15:29:06 UTC][ZED][ERROR] [ZED] Cannot initialize the camera.`  
`nvbuf_utils: dmabuf_fd -1 mapped entry NOT found`  
`nvbuf_utils: dmabuf_fd -1 mapped entry NOT found`

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 17, 2025, 3:31pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/6 "2025-10-17T15:31:48Z")

</div>

Are you working in headless mode?

[https://support.stereolabs.com/hc/en-us/articles/28103346502167-Why-can-t-I-use-the-ZED-X-camera-with-ssh-X-in-headless-mode](https://support.stereolabs.com/hc/en-us/articles/28103346502167-Why-can-t-I-use-the-ZED-X-camera-with-ssh-X-in-headless-mode)

---

<div class="post-metadata">

**Author:** ![Julen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@Julen](https://community.stereolabs.com/u/Julen)\
**Post date:** [October 17, 2025, 3:33pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/7 "2025-10-17T15:33:30Z")

</div>

No. My current setup has both a monitor,a keyboard and a mouse connected to the jetson board

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 17, 2025, 3:35pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/8 "2025-10-17T15:35:45Z")

</div>

Please try to run the command `sudo service zed_x_daemon restart` before trying to open the cameras again.  
This will reset the ZED X Driver in case you plugged/unplugged cameras while the host was already booted. GMSL2 cameras are not plug-and-play; you cannot change the hardware configuration while the host is running.

---

<div class="post-metadata">

**Author:** ![Julen](https://community.stereolabs.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@Julen](https://community.stereolabs.com/u/Julen)\
**Post date:** [October 17, 2025, 3:39pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/9 "2025-10-17T15:39:33Z")

</div>

It seems the error to persist.

Given 4 cameras connected, I can read two but the other two I cannot. I can read camera 1 and camera 3, but no 2 and 4

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 17, 2025, 3:44pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/10 "2025-10-17T15:44:09Z")

</div>

Th

> [@Julen](#):
>
> Given 4 cameras connected, I can read two but the other two I cannot. I can read camera 1 and camera 3, but no 2 and 4

This normally happens with old ZED X Driver or SDK versions, but you are using the latest.

I’m checking with the HW team what can be the cause of the problem.

---

<div class="post-metadata">

**Author:** ![Myzhar](https://community.stereolabs.com/user_avatar/community.stereolabs.com/myzhar/32/11_2.png) [@Myzhar](https://community.stereolabs.com/u/Myzhar)\
**Post date:** [October 20, 2025, 1:01pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174/11 "2025-10-20T13:01:07Z")

</div>

Please double check whether the capture card is correctly plugged in, and the cameras too.  
These types of problems appear only with bad connections.
