# ZED2

**URL:** https://community.stereolabs.com/c/hw/zed2/15.md

[Latest](https://community.stereolabs.com/latest.md) · [Categories](https://community.stereolabs.com/categories.md) · [Tags](https://community.stereolabs.com/tags.md)

---

## [About the ZED2 category](https://community.stereolabs.com/t/about-the-zed2-category/42)

<div class="topic-metadata">

**Author:** [@adujardin](https://community.stereolabs.com/u/adujardin)\
**Replies:** 0

</div>

---

## [NEURAL depth mode silently disabled after a camera-grab error burst — fps rises above the NEURAL ceiling, no error surfaced](https://community.stereolabs.com/t/neural-depth-mode-silently-disabled-after-a-camera-grab-error-burst-fps-rises-above-the-neural-ceiling-no-error-surfaced/11545)

<div class="topic-metadata">

**Author:** [@jeff.crouse](https://community.stereolabs.com/u/jeff.crouse)\
**Replies:** 8\
**Last updated:** [October 7, 2026, 5:19pm UTC](https://community.stereolabs.com/t/neural-depth-mode-silently-disabled-after-a-camera-grab-error-burst-fps-rises-above-the-neural-ceiling-no-error-surfaced/11545 "2026-10-07T17:19:59Z")

</div>

\# NEURAL depth mode silently disabled after a camera-grab error burst — fps rises above the NEURAL ceiling, no error surfaced \*\*Setup:\*\* ZED Box Mini (Jetson Orin, JetPack 6.2 / L4T 36.4), ZED SDK 5.x, Python bindings (…

---

## [ZED 2i camera (SDK 5.4.1) regularly disconnects](https://community.stereolabs.com/t/zed-2i-camera-sdk-5-4-1-regularly-disconnects/11706)

<div class="topic-metadata">

**Author:** [@aschreiberuiuc](https://community.stereolabs.com/u/aschreiberuiuc)\
**Replies:** 2\
**Last updated:** [September 10, 2026, 5:49pm UTC](https://community.stereolabs.com/t/zed-2i-camera-sdk-5-4-1-regularly-disconnects/11706 "2026-09-10T17:49:04Z")

</div>

Hi, I have a ZED 2i camera that I’m using with an NVIDIA Jetson Thor. It is connected via USB. I am using ZED SDK 5.4.1. After about 1-5 minutes of streaming video (720p, with the issue occurring at 15 FPS and 30 FPS), …

---

## [Hardware requirements for recording from 3 Zed 2i cameras](https://community.stereolabs.com/t/hardware-requirements-for-recording-from-3-zed-2i-cameras/11709)

<div class="topic-metadata">

**Author:** [@dkilic](https://community.stereolabs.com/u/dkilic)\
**Replies:** 2\
**Last updated:** [September 10, 2026, 6:18am UTC](https://community.stereolabs.com/t/hardware-requirements-for-recording-from-3-zed-2i-cameras/11709 "2026-09-10T06:18:31Z")

</div>

I want to record time-synced videos from 3 Zed 2i cameras. They are physically close to each other, such that I think a single PC that connects to all of them is the easiest way to achieve that. My questions pertains on …

---

## [ZED 2 Calibration File Error ](https://community.stereolabs.com/t/zed-2-calibration-file-error/11055)

<div class="topic-metadata">

**Author:** [@JawaliI](https://community.stereolabs.com/u/JawaliI)\
**Replies:** 5\
**Last updated:** [August 27, 2026, 9:19am UTC](https://community.stereolabs.com/t/zed-2-calibration-file-error/11055 "2026-08-27T09:19:00Z")

</div>

I recently tried running one of the ZED tutorials on a Jetson Nano using legacy ZED binocular camera hardware (I think it’s the ZED 2), and have encountered a persistent camera calibration error. This error persisted des…

---

## [imu noise parameters](https://community.stereolabs.com/t/imu-noise-parameters/11644)

<div class="topic-metadata">

**Author:** [@Francesco](https://community.stereolabs.com/u/Francesco)\
**Replies:** 1\
**Last updated:** [August 24, 2026, 4:11pm UTC](https://community.stereolabs.com/t/imu-noise-parameters/11644 "2026-08-24T16:11:29Z")

</div>

Hi Stereolabs team, i am using a ZED i2 and i need the following parameters: -accelleration bias random walk -gyroscope bias random walk. If it is possible i need the reference frame of imu with respect to zed\_camrer…

---

## [How to perform external/multi-camera calibration with two ZED 2i cameras? Has anyone tried this?](https://community.stereolabs.com/t/how-to-perform-external-multi-camera-calibration-with-two-zed-2i-cameras-has-anyone-tried-this/11650)

<div class="topic-metadata">

**Author:** [@jithu](https://community.stereolabs.com/u/jithu)\
**Replies:** 3\
**Last updated:** [August 24, 2026, 9:39am UTC](https://community.stereolabs.com/t/how-to-perform-external-multi-camera-calibration-with-two-zed-2i-cameras-has-anyone-tried-this/11650 "2026-08-24T09:39:20Z")

</div>

I am working on a setup with two ZED 2i cameras mounted externally at fixed positions around my workspace. I would like to determine the relative position and orientation (extrinsic parameters) of the two cameras accurat…

---

## [Zed 2i, camera tracking + scanned mesh for post workflow with unreal engine and resolve](https://community.stereolabs.com/t/zed-2i-camera-tracking-scanned-mesh-for-post-workflow-with-unreal-engine-and-resolve/11421)

<div class="topic-metadata">

**Author:** [@ninosignups](https://community.stereolabs.com/u/ninosignups)\
**Replies:** 7\
**Last updated:** [July 22, 2026, 4:25pm UTC](https://community.stereolabs.com/t/zed-2i-camera-tracking-scanned-mesh-for-post-workflow-with-unreal-engine-and-resolve/11421 "2026-07-22T16:25:10Z")

</div>

Hello, I’m exploring using the Zen 2i in an indie vfx workflow and had a few questions: I’m scoping a film shoot where I would need to mount the zed 2i to a cinema camera (probably RED). I want to record the 6dof of the…

---

## [Periodically "CAMERA NOT DETECTED"](https://community.stereolabs.com/t/periodically-camera-not-detected/11553)

<div class="topic-metadata">

**Author:** [@Bink](https://community.stereolabs.com/u/Bink)\
**Replies:** 2\
**Last updated:** [July 18, 2026, 8:41am UTC](https://community.stereolabs.com/t/periodically-camera-not-detected/11553 "2026-07-18T08:41:27Z")

</div>

In our in-production installation with 3 PC’s + 3 ZED 2i cameras installed for rock-climbing walls, we’re periodically hitting an issue where a camera will lose connectivity to the computer. It doesn’t appear to be isol…

---

## [Quantifying ZED depth offset against solvePnP — looking for reduction strategies](https://community.stereolabs.com/t/quantifying-zed-depth-offset-against-solvepnp-looking-for-reduction-strategies/11452)

<div class="topic-metadata">

**Author:** [@rokl](https://community.stereolabs.com/u/rokl)\
**Replies:** 6\
**Last updated:** [July 13, 2026, 3:42pm UTC](https://community.stereolabs.com/t/quantifying-zed-depth-offset-against-solvepnp-looking-for-reduction-strategies/11452 "2026-07-13T15:42:17Z")

</div>

Hi, In the future i need to manually combine multiple Zed Cameras, so for starters i though id check the PCD accuracies and also try to find some calibration tool → cv2 checkboard seems useful here so now i wanted to c…

---

## [Rotation System for ZED 2i](https://community.stereolabs.com/t/rotation-system-for-zed-2i/11491)

<div class="topic-metadata">

**Author:** [@AfonsoProenca23](https://community.stereolabs.com/u/AfonsoProenca23)\
**Replies:** 5\
**Last updated:** [July 3, 2026, 4:13pm UTC](https://community.stereolabs.com/t/rotation-system-for-zed-2i/11491 "2026-07-03T16:13:23Z")

</div>

We recently purchased a ZED 2i camera for a robotics rover project. We are currently designing a custom mount and would like the camera to rotate automatically through 360° to increase its field of view. We have attache…

---

## [Strange image corruption when recording svo files](https://community.stereolabs.com/t/strange-image-corruption-when-recording-svo-files/11468)

<div class="topic-metadata">

**Author:** [@sothos](https://community.stereolabs.com/u/sothos)\
**Replies:** 7\
**Last updated:** [July 3, 2026, 3:34pm UTC](https://community.stereolabs.com/t/strange-image-corruption-when-recording-svo-files/11468 "2026-07-03T15:34:49Z")

</div>

I was having some issues with spatial mapping where it seemed like for whatever reason the tracking would simply just believe that the yaw is now 40 degrees different than the previous frame and it was producing several …

---

## [Zed 2i depth viewer showing nothing, while Zed diagnostics and Zed explorer seem to be working fine](https://community.stereolabs.com/t/zed-2i-depth-viewer-showing-nothing-while-zed-diagnostics-and-zed-explorer-seem-to-be-working-fine/11497)

<div class="topic-metadata">

**Author:** [@tz3423](https://community.stereolabs.com/u/tz3423)\
**Replies:** 3\
**Last updated:** [July 3, 2026, 3:26pm UTC](https://community.stereolabs.com/t/zed-2i-depth-viewer-showing-nothing-while-zed-diagnostics-and-zed-explorer-seem-to-be-working-fine/11497 "2026-07-03T15:26:58Z")

</div>

Hello, I am not able to see any points in the Zed Depth Viewer, but Zed explorer and Zed diagnostics seems to be working fine. I am running Windows 11. Anything I can do to resolve this problem? { “AI Models”: { …

---

## [Zed 2 camera not found in diagnostic, crashes in Explorer on record](https://community.stereolabs.com/t/zed-2-camera-not-found-in-diagnostic-crashes-in-explorer-on-record/11462)

<div class="topic-metadata">

**Author:** [@ninosignups](https://community.stereolabs.com/u/ninosignups)\
**Replies:** 4\
**Last updated:** [June 30, 2026, 12:49pm UTC](https://community.stereolabs.com/t/zed-2-camera-not-found-in-diagnostic-crashes-in-explorer-on-record/11462 "2026-06-30T12:49:58Z")

</div>

I can see the camera in Zed Explorer working, but it crashes when I try and record, regardless of recording settings. Initially I receive an error: ”Cannot record SVO. Make sure you have administrator rights, enough sto…

---

## [ZED 2i Calibration and Skeleton Tracking](https://community.stereolabs.com/t/zed-2i-calibration-and-skeleton-tracking/10648)

<div class="topic-metadata">

**Author:** [@sachithwelarathna](https://community.stereolabs.com/u/sachithwelarathna)\
**Replies:** 14\
**Last updated:** [June 26, 2026, 4:11pm UTC](https://community.stereolabs.com/t/zed-2i-calibration-and-skeleton-tracking/10648 "2026-06-26T16:11:36Z")

</div>

Hi StereoLabs team and community, I am working with multiple ZED 2i cameras for skeleton tracking (tracking distances between 2–10 m, testing one camera at a time under normal lighting conditions but for calibration I u…

---

## [About AI model in depth viewer](https://community.stereolabs.com/t/about-ai-model-in-depth-viewer/11451)

<div class="topic-metadata">

**Author:** [@EthanLee](https://community.stereolabs.com/u/EthanLee)\
**Replies:** 4\
**Last updated:** [June 22, 2026, 9:18pm UTC](https://community.stereolabs.com/t/about-ai-model-in-depth-viewer/11451 "2026-06-22T21:18:22Z")

</div>

Hi there,After installing the ZED SDK on Windows, Explorer and Studio run normally, but the Depth Viewer keeps popping up this window indefinitely, and I can’t click any UI buttons. Diagnostic shows that the AI ​​model c…

---

## [ZZED 2i Not Detected and Blue LED Not Turning On](https://community.stereolabs.com/t/zzed-2i-not-detected-and-blue-led-not-turning-on/11434)

<div class="topic-metadata">

**Author:** [@Unn-Phakapol-S](https://community.stereolabs.com/u/Unn-Phakapol-S)\
**Replies:** 5\
**Last updated:** [June 15, 2026, 4:46pm UTC](https://community.stereolabs.com/t/zzed-2i-not-detected-and-blue-led-not-turning-on/11434 "2026-06-15T16:46:09Z")

</div>

Hello everyone, I have been using a ZED 2i camera with a Jetson AGX Orin for a few months without any major issues. However, one day the ZED 2i was suddenly no longer detected by the system, and the blue LED on the came…

---

## [Headless firmware update?](https://community.stereolabs.com/t/headless-firmware-update/9686)

<div class="topic-metadata">

**Author:** [@nfntn](https://community.stereolabs.com/u/nfntn)\
**Replies:** 4\
**Last updated:** [June 5, 2026, 3:36pm UTC](https://community.stereolabs.com/t/headless-firmware-update/9686 "2026-06-05T15:36:10Z")

</div>

Hi, Is it possible to conduct ZED2i firmware updates without using the ZED\_Explorer UI? I couldn’t find any information on this in the documentation. If not, is it planned to be supported? Best, Noé

---

## [Viability of using fibre optic USB 3.2 gen2 cables?](https://community.stereolabs.com/t/viability-of-using-fibre-optic-usb-3-2-gen2-cables/11405)

<div class="topic-metadata">

**Author:** [@Bink](https://community.stereolabs.com/u/Bink)\
**Replies:** 1\
**Last updated:** [June 5, 2026, 10:13am UTC](https://community.stereolabs.com/t/viability-of-using-fibre-optic-usb-3-2-gen2-cables/11405 "2026-06-05T10:13:02Z")

</div>

I had planned to use StereoLabs 10 meter USB 3.1 type-c dual screw locking cables for use with the ZED 2i cameras, however circumstances saw the cameras ordered from another supplier without the cables, and the StereoLab…

---

## [ZED 2i: Severe magenta/purple image corruption after bright sunlight exposure](https://community.stereolabs.com/t/zed-2i-severe-magenta-purple-image-corruption-after-bright-sunlight-exposure/11388)

<div class="topic-metadata">

**Author:** [@dweinlader](https://community.stereolabs.com/u/dweinlader)\
**Replies:** 3\
**Last updated:** [June 3, 2026, 12:50pm UTC](https://community.stereolabs.com/t/zed-2i-severe-magenta-purple-image-corruption-after-bright-sunlight-exposure/11388 "2026-06-03T12:50:00Z")

</div>

Key observations: The issue has been observed on a large number of cameras. We have nearly 200 ZED 2i units deployed, so this does not appear to be a failure of a single camera. I have observed this issue using bot…

---

## [ZED 2 vs ZED 2i 10m cable option for underwater ROV — latency concerns](https://community.stereolabs.com/t/zed-2-vs-zed-2i-10m-cable-option-for-underwater-rov-latency-concerns/11365)

<div class="topic-metadata">

**Author:** [@Juhyunnn0](https://community.stereolabs.com/u/Juhyunnn0)\
**Replies:** 1\
**Last updated:** [May 28, 2026, 2:55pm UTC](https://community.stereolabs.com/t/zed-2-vs-zed-2i-10m-cable-option-for-underwater-rov-latency-concerns/11365 "2026-05-28T14:55:26Z")

</div>

Hello everyone, I am working on an underwater robotics project using the ZED 2 camera. We are planning to deploy the camera in a waterproof housing mounted on an ROV, and we need a cable length of approximately 10 meter…

---

## [ZED 2 Camera not recognized on Jetson AGX Xavier](https://community.stereolabs.com/t/zed-2-camera-not-recognized-on-jetson-agx-xavier/11257)

<div class="topic-metadata">

**Author:** [@BachThu](https://community.stereolabs.com/u/BachThu)\
**Replies:** 1\
**Last updated:** [May 4, 2026, 9:46am UTC](https://community.stereolabs.com/t/zed-2-camera-not-recognized-on-jetson-agx-xavier/11257 "2026-05-04T09:46:02Z")

</div>

Hi Stereolabs Support Team, I am writing to report a recognition issue with my ZED 2 camera when connected to a Jetson AGX Xavier. To provide some context, the camera and its cable are perfectly fine. When connected to…

---

## [Tracking 15-20 people — what performance issues will I hit?](https://community.stereolabs.com/t/tracking-15-20-people-what-performance-issues-will-i-hit/11080)

<div class="topic-metadata">

**Author:** [@scottbraddon](https://community.stereolabs.com/u/scottbraddon)\
**Replies:** 1\
**Last updated:** [March 24, 2026, 6:44pm UTC](https://community.stereolabs.com/t/tracking-15-20-people-what-performance-issues-will-i-hit/11080 "2026-03-24T18:44:24Z")

</div>

Hey, I’m new here so apologies if this post lacks nuance but please let me know if you need clarification. I’m looking at using 6-8 ZED 2i cameras to track 15-20 people in a room at the same time. Planning to use Fusio…

---

## [Issues with ZED\_Calibration tool after inaccurate factory transforms](https://community.stereolabs.com/t/issues-with-zed-calibration-tool-after-inaccurate-factory-transforms/11034)

<div class="topic-metadata">

**Author:** [@MickleG](https://community.stereolabs.com/u/MickleG)\
**Replies:** 1\
**Last updated:** [March 20, 2026, 7:21pm UTC](https://community.stereolabs.com/t/issues-with-zed-calibration-tool-after-inaccurate-factory-transforms/11034 "2026-03-20T19:21:07Z")

</div>

We recently purchased 3 Zed 2i cameras and are measuring road surfaces at a distance of 1-3 meters away. We originally tried using the factory calibrations for the cameras, but these have proven to be inaccurate (depth r…

---

## [SDK nonfunctional with ZED 2i LINUX](https://community.stereolabs.com/t/sdk-nonfunctional-with-zed-2i-linux/11021)

<div class="topic-metadata">

**Author:** [@jeff1](https://community.stereolabs.com/u/jeff1)\
**Replies:** 1\
**Last updated:** [March 13, 2026, 11:23pm UTC](https://community.stereolabs.com/t/sdk-nonfunctional-with-zed-2i-linux/11021 "2026-03-13T23:23:21Z")

</div>

The newest version 5.2.2 is still non-functional with the 2i camera. Here is the diagnostics file I’ve followed the guideline regarding USB-PORT 3.0+, installing the correct cuda/tensorRT versions as well. Any leads on …

---

## [Zed SDK diagnostic crashing](https://community.stereolabs.com/t/zed-sdk-diagnostic-crashing/10935)

<div class="topic-metadata">

**Author:** [@Edwu](https://community.stereolabs.com/u/Edwu)\
**Replies:** 15\
**Last updated:** [March 13, 2026, 2:39pm UTC](https://community.stereolabs.com/t/zed-sdk-diagnostic-crashing/10935 "2026-03-13T14:39:17Z")

</div>

Hi, I Installed SDK Windows. I’m downloaded the CUDA separately. When i try to use Zed SDK diagnostic it crashed during camera detection step. Couldn’t even create the diagnostic report. Any idea why?

---

## [Calibration failed](https://community.stereolabs.com/t/calibration-failed/10945)

<div class="topic-metadata">

**Author:** [@Edwu](https://community.stereolabs.com/u/Edwu)\
**Replies:** 1\
**Last updated:** [March 4, 2026, 10:00am UTC](https://community.stereolabs.com/t/calibration-failed/10945 "2026-03-04T10:00:11Z")

</div>

Hi, I used the SDK calibration. I tried three times. every time at the end it says unsuccessful calibration. ZED calibration did not manage to perform a good calibration. Please try again. If this error persists. please …

---

## [ZED 2i camera not detected by Ubuntu 22.04](https://community.stereolabs.com/t/zed-2i-camera-not-detected-by-ubuntu-22-04/10878)

<div class="topic-metadata">

**Author:** [@Alessandro94](https://community.stereolabs.com/u/Alessandro94)\
**Replies:** 5\
**Last updated:** [March 2, 2026, 1:25pm UTC](https://community.stereolabs.com/t/zed-2i-camera-not-detected-by-ubuntu-22-04/10878 "2026-03-02T13:25:40Z")

</div>

Hi, I’m testing a ZED 2i camera, but unfortunately, the camera does not power on when connected — no LEDs light up, and it is not detected by the system. I am using Ubuntu 22.04. I have installed the ZED SDK and used th…

---

## [Camera can't be detected](https://community.stereolabs.com/t/camera-cant-be-detected/10925)

<div class="topic-metadata">

**Author:** [@Edwu](https://community.stereolabs.com/u/Edwu)\
**Replies:** 1\
**Last updated:** [February 28, 2026, 4:49am UTC](https://community.stereolabs.com/t/camera-cant-be-detected/10925 "2026-02-28T04:49:58Z")

</div>

Hi guys. I have installed Zed SDK. when i try to open calibration it shows Camera Not Detected : a ZED camera must be connected to perform a calibration. anyone has any ideas why?

---

## [ZED 2i camera not detected by Ubuntu 22.04](https://community.stereolabs.com/t/zed-2i-camera-not-detected-by-ubuntu-22-04/10879)

<div class="topic-metadata">

**Author:** [@Alessandro94](https://community.stereolabs.com/u/Alessandro94)\
**Replies:** 1\
**Last updated:** [February 24, 2026, 11:16am UTC](https://community.stereolabs.com/t/zed-2i-camera-not-detected-by-ubuntu-22-04/10879 "2026-02-24T11:16:08Z")

</div>

Hi, I’m testing a ZED 2i camera, but unfortunately, the camera does not power on when connected — no LEDs light up, and it is not detected by the system. I am using Ubuntu 22.04. I have installed the ZED SDK and used th…

[Next page](https://community.stereolabs.com/c/hw/zed2/15.md?page=1)
