# ZED X

**URL:** https://community.stereolabs.com/c/hw/zed-x/19.md?page=3

[Latest](https://community.stereolabs.com/latest.md) · [Categories](https://community.stereolabs.com/categories.md) · [Tags](https://community.stereolabs.com/tags.md)

**Page:** 4

---

## [Camera not detected Capture Card is on](https://community.stereolabs.com/t/camera-not-detected-capture-card-is-on/10307)

<div class="topic-metadata">

**Author:** [@tillwald](https://community.stereolabs.com/u/tillwald)\
**Replies:** 3\
**Last updated:** [November 14, 2025, 5:03pm UTC](https://community.stereolabs.com/t/camera-not-detected-capture-card-is-on/10307 "2025-11-14T17:03:13Z")

</div>

I am running a Jetson Orin AGX connected to a Stereolabs ZED Link Capture Card Quad. I have four ZedXOne GMSL cameras connected to this setup. The problem is that the cameras are not being detected. Running the command Z…

---

## [Low imu frequency (190Hz, unstable) of ZED X1 GS with Jetson NX16Gb on ZED mini carrierboard.](https://community.stereolabs.com/t/low-imu-frequency-190hz-unstable-of-zed-x1-gs-with-jetson-nx16gb-on-zed-mini-carrierboard/10139)

<div class="topic-metadata">

**Author:** [@kubaplonka](https://community.stereolabs.com/u/kubaplonka)\
**Replies:** 17\
**Last updated:** [November 14, 2025, 1:33pm UTC](https://community.stereolabs.com/t/low-imu-frequency-190hz-unstable-of-zed-x1-gs-with-jetson-nx16gb-on-zed-mini-carrierboard/10139 "2025-11-14T13:33:25Z")

</div>

Good afternoon, I have 2 (sn300473976 and sn309573082) x1 gs cameras (stereo configuration) both have the same problem on all 3 topics: Accelerometer Gyroscope Orientation The data comes at a lower frequency than rep…

---

## [Does ZED X One works on Drive AGX Thor Developer Kit?](https://community.stereolabs.com/t/does-zed-x-one-works-on-drive-agx-thor-developer-kit/10288)

<div class="topic-metadata">

**Author:** [@shpark98](https://community.stereolabs.com/u/shpark98)\
**Replies:** 5\
**Last updated:** [November 10, 2025, 10:31am UTC](https://community.stereolabs.com/t/does-zed-x-one-works-on-drive-agx-thor-developer-kit/10288 "2025-11-10T10:31:34Z")

</div>

Does ZED X One works on Drive AGX Thor Developer Kit?

---

## [Getting ZED X video feed on Raspberry Pi via capture card](https://community.stereolabs.com/t/getting-zed-x-video-feed-on-raspberry-pi-via-capture-card/10268)

<div class="topic-metadata">

**Author:** [@alexblackeyed](https://community.stereolabs.com/u/alexblackeyed)\
**Replies:** 3\
**Last updated:** [November 6, 2025, 11:12am UTC](https://community.stereolabs.com/t/getting-zed-x-video-feed-on-raspberry-pi-via-capture-card/10268 "2025-11-06T11:12:58Z")

</div>

Hi everyone, Would it be possible to get the live RGB feed from a ZED X camera using a capture card connected to a Raspberry Pi, without using the ZED SDK (no need for any depth data or anything, just plain video)? I ha…

---

## [ZED Camera Setup for Long-Range Object Detection](https://community.stereolabs.com/t/zed-camera-setup-for-long-range-object-detection/10279)

<div class="topic-metadata">

**Author:** [@NivC](https://community.stereolabs.com/u/NivC)\
**Replies:** 5\
**Last updated:** [November 6, 2025, 9:58am UTC](https://community.stereolabs.com/t/zed-camera-setup-for-long-range-object-detection/10279 "2025-11-06T09:58:52Z")

</div>

Hi everyone, I’m considering using a pair of ZED X One 4K cameras mounted with a custom baseline of 1–2 meters for a stereo setup. The goal is to detect and estimate the distance of a boat in open sea, approximately 2 …

---

## [ZED X SVO2 Timestamps incorrect](https://community.stereolabs.com/t/zed-x-svo2-timestamps-incorrect/10271)

<div class="topic-metadata">

**Author:** [@Waelyn](https://community.stereolabs.com/u/Waelyn)\
**Replies:** 1\
**Last updated:** [November 5, 2025, 2:41pm UTC](https://community.stereolabs.com/t/zed-x-svo2-timestamps-incorrect/10271 "2025-11-05T14:41:45Z")

</div>

Hi folks, I’m recording with 4 ZED Xs on an AGX orin, ZED SDK 5.1, latest ZED X driver, etc. I’ve been getting weird timestamp issues playing back from SVO files. The timestamps of my cameras seem to be using std::stea…

---

## [Jetson Orin ZED X One gmsl2 cannot detect ](https://community.stereolabs.com/t/jetson-orin-zed-x-one-gmsl2-cannot-detect/10245)

<div class="topic-metadata">

**Author:** [@Harin](https://community.stereolabs.com/u/Harin)\
**Replies:** 1\
**Last updated:** [November 4, 2025, 6:49pm UTC](https://community.stereolabs.com/t/jetson-orin-zed-x-one-gmsl2-cannot-detect/10245 "2025-11-04T18:49:27Z")

</div>

Our environments are like below. Jetson Orin developer kit Ubuntu 22.04 + Cuda 12.6 Link duo capture card Jetpack 36.4.0 We flashed 36.4.0 version on Jetson orin devkit, and we intsalled zed x drivers 1.3.2 versio (ht…

---

## [Multi-Camera Fusion Help: Two ZED cameras (one facing up, one facing down, non-overlapping) on Jetson — how to align point clouds and detections into one coordinate system?](https://community.stereolabs.com/t/multi-camera-fusion-help-two-zed-cameras-one-facing-up-one-facing-down-non-overlapping-on-jetson-how-to-align-point-clouds-and-detections-into-one-coordinate-system/10216)

<div class="topic-metadata">

**Author:** [@Minion-s](https://community.stereolabs.com/u/Minion-s)\
**Replies:** 1\
**Last updated:** [October 28, 2025, 9:34am UTC](https://community.stereolabs.com/t/multi-camera-fusion-help-two-zed-cameras-one-facing-up-one-facing-down-non-overlapping-on-jetson-how-to-align-point-clouds-and-detections-into-one-coordinate-system/10216 "2025-10-28T09:34:21Z")

</div>

I’m currently working on a drone / inspection project equipped with two ZED cameras (ZED X / ZED 2, etc.) — one camera is facing upward (to detect high obstacles or sky objects), and the other is facing downward (for gro…

---

## [Cannot Initialize the Camera](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174)

<div class="topic-metadata">

**Author:** [@Julen](https://community.stereolabs.com/u/Julen)\
**Replies:** 10\
**Last updated:** [October 20, 2025, 1:01pm UTC](https://community.stereolabs.com/t/cannot-initialize-the-camera/10174 "2025-10-20T13:01:07Z")

</div>

Good Evening, I am using a Jetson AGX Orin Dev Kit (64 Gb) with a dual stereo and four cameras connected. ZED Explorer -a detects all cameras, but when trying to open the cameras with ZED\_Depth Viewer or ZED\_Explorer,i…

---

## [Benchmarking ZED X Cameras (4x) with NVIDIA Jetson AGX Orin 64GB – Body Tracking & 3D Scene Reconstruction](https://community.stereolabs.com/t/benchmarking-zed-x-cameras-4x-with-nvidia-jetson-agx-orin-64gb-body-tracking-3d-scene-reconstruction/10138)

<div class="topic-metadata">

**Author:** [@onit](https://community.stereolabs.com/u/onit)\
**Replies:** 1\
**Last updated:** [October 14, 2025, 6:45pm UTC](https://community.stereolabs.com/t/benchmarking-zed-x-cameras-4x-with-nvidia-jetson-agx-orin-64gb-body-tracking-3d-scene-reconstruction/10138 "2025-10-14T18:45:17Z")

</div>

Hi everyone, I’m planning a setup with four ZED X cameras connected via GMSL2 Fakra cables and a Quad Capture Card with a Jetson AGX Orin 64GB (see Robotics 360° Perception Kit). My goal is to run it with preferably 19…

---

## [Camera test in Diagnostics tool fails saying 'camera not detected'](https://community.stereolabs.com/t/camera-test-in-diagnostics-tool-fails-saying-camera-not-detected/10049)

<div class="topic-metadata">

**Author:** [@Krishna57](https://community.stereolabs.com/u/Krishna57)\
**Replies:** 8\
**Last updated:** [October 10, 2025, 9:21am UTC](https://community.stereolabs.com/t/camera-test-in-diagnostics-tool-fails-saying-camera-not-detected/10049 "2025-10-10T09:21:14Z")

</div>

Hi everyone, I recently purchased a ZED X Series GMSL2 Stereo Camera and have been trying to get it up and running on my Jetson Orin Nano using the mono capture card. I’ve followed all the official setup instructions…

---

## [Custom Calibration Request: 360-Degree Vision System (Non-Overlapping ZED-X Cameras)](https://community.stereolabs.com/t/custom-calibration-request-360-degree-vision-system-non-overlapping-zed-x-cameras/10010)

<div class="topic-metadata">

**Author:** [@Mbarek](https://community.stereolabs.com/u/Mbarek)\
**Replies:** 3\
**Last updated:** [October 1, 2025, 11:02am UTC](https://community.stereolabs.com/t/custom-calibration-request-360-degree-vision-system-non-overlapping-zed-x-cameras/10010 "2025-10-01T11:02:59Z")

</div>

Hello StereoLabs Team and Community, I am building a 360-degree vision system using four ZED-X cameras with mixed focal lengths: two at 2.2mm and two at 4mm. The key challenge in my setup is that the cameras are mounted…

---

## [\[ZED\]\[Encoding\] Critical Error : No Video Enc \[enc\_0\]](https://community.stereolabs.com/t/zed-encoding-critical-error-no-video-enc-enc-0/7058)

<div class="topic-metadata">

**Author:** [@han12580](https://community.stereolabs.com/u/han12580)\
**Replies:** 7\
**Last updated:** [September 29, 2025, 5:55pm UTC](https://community.stereolabs.com/t/zed-encoding-critical-error-no-video-enc-enc-0/7058 "2025-09-29T17:55:57Z")

</div>

I cannot record on GPU. When I use the H.264 or H.265, It shows this han@ubuntu:/usr/local/zed/tools$ sudo ./ZED\_Explorer \[sudo\] password for han: QStandardPaths: XDG\_RUNTIME\_DIR not set, defaulting to '/tmp/runtime-r…

---

## [ZED DUO cannot run Normal](https://community.stereolabs.com/t/zed-duo-cannot-run-normal/9937)

<div class="topic-metadata">

**Author:** [@wangchunyi120](https://community.stereolabs.com/u/wangchunyi120)\
**Replies:** 1\
**Last updated:** [September 25, 2025, 6:55pm UTC](https://community.stereolabs.com/t/zed-duo-cannot-run-normal/9937 "2025-09-25T18:55:34Z")

</div>

I use a Jetson AGX Orin Platform ，And a ZEDX camera，use ZED DUO CAPTURE CARD，But I can't detect the Camera, seems like the device tree is not OK. Environment JetPack 6.0 L4T 36.3.0 Ubuntu 22.04 (Jammy Jellyfis…

---

## [ZEDX camera error with Jetson orin nano](https://community.stereolabs.com/t/zedx-camera-error-with-jetson-orin-nano/9911)

<div class="topic-metadata">

**Author:** [@Kiruthiga](https://community.stereolabs.com/u/Kiruthiga)\
**Replies:** 1\
**Last updated:** [September 16, 2025, 5:00pm UTC](https://community.stereolabs.com/t/zedx-camera-error-with-jetson-orin-nano/9911 "2025-09-16T17:00:40Z")

</div>

Hi, I’ve installed the ZED SDK compatible with JetPack 6.2 and the ZED Link Mono driver to access the camera on a Jetson Orin Nano. I’m encountering below error while accessing camera and ZED Explorer is unable to retrie…

---

## [Lenses Compatible with the Zedx one ](https://community.stereolabs.com/t/lenses-compatible-with-the-zedx-one/9901)

<div class="topic-metadata">

**Author:** [@Farah](https://community.stereolabs.com/u/Farah)\
**Replies:** 1\
**Last updated:** [September 16, 2025, 2:05pm UTC](https://community.stereolabs.com/t/lenses-compatible-with-the-zedx-one/9901 "2025-09-16T14:05:22Z")

</div>

Does the camera accept S-mount lenses other than those listed on your website?

---

## [ zedx detect error in my device ](https://community.stereolabs.com/t/zedx-detect-error-in-my-device/9706)

<div class="topic-metadata">

**Author:** [@Que121](https://community.stereolabs.com/u/Que121)\
**Replies:** 10\
**Last updated:** [September 5, 2025, 3:30pm UTC](https://community.stereolabs.com/t/zedx-detect-error-in-my-device/9706 "2025-09-05T15:30:08Z")

</div>

I using Duo card and orin nano with ZED x, I do think my connection and power supply is correct, but I cannnot get my streaming in this condition.

---

## [ZED X Camera Error](https://community.stereolabs.com/t/zed-x-camera-error/9665)

<div class="topic-metadata">

**Author:** [@nweg](https://community.stereolabs.com/u/nweg)\
**Replies:** 16\
**Last updated:** [September 2, 2025, 4:01pm UTC](https://community.stereolabs.com/t/zed-x-camera-error/9665 "2025-09-02T16:01:55Z")

</div>

Hello, I get the following error when trying to start one of our ZED X cameras using ZED\_Explorer \*\* \[SVO\] Hardware compression (NVENC) available \*\* nvbuf\_utils: dmabuf\_fd -1 mapped entry NOT found nvbuf\_utils: dmab…

---

## [Frame tear for zed x mini camera](https://community.stereolabs.com/t/frame-tear-for-zed-x-mini-camera/9743)

<div class="topic-metadata">

**Author:** [@lukechen](https://community.stereolabs.com/u/lukechen)\
**Replies:** 2\
**Last updated:** [August 27, 2025, 4:20pm UTC](https://community.stereolabs.com/t/frame-tear-for-zed-x-mini-camera/9743 "2025-08-27T16:20:55Z")

</div>

Hi engineering team! I am using zed x mini camera with zed link duo on jetson orin nano. I used the python API to grab images and publish them into compressed images in ros2, which I later collected to be a rosbag and ru…

---

## [ZED X stream crashing with multiple cameras](https://community.stereolabs.com/t/zed-x-stream-crashing-with-multiple-cameras/9754)

<div class="topic-metadata">

**Author:** [@ali](https://community.stereolabs.com/u/ali)\
**Replies:** 2\
**Last updated:** [August 27, 2025, 2:36pm UTC](https://community.stereolabs.com/t/zed-x-stream-crashing-with-multiple-cameras/9754 "2025-08-27T14:36:36Z")

</div>

I am experiencing an issue with cameras/streaming crashing with my camera system. Here is a (hopefully) detailed description of the system I have currently: I have 3 cameras (2x ZED X Mini, 1x ZED X) connected to an Nv…

---

## [Unable to connect ZEDX cameras on Jetson Orin AGX](https://community.stereolabs.com/t/unable-to-connect-zedx-cameras-on-jetson-orin-agx/9641)

<div class="topic-metadata">

**Author:** [@mfruhner](https://community.stereolabs.com/u/mfruhner)\
**Replies:** 2\
**Last updated:** [August 13, 2025, 7:19am UTC](https://community.stereolabs.com/t/unable-to-connect-zedx-cameras-on-jetson-orin-agx/9641 "2025-08-13T07:19:35Z")

</div>

Hey, we purchased your ZED Link Duo card and installed it to our Jetson Orin AGX. We connect two ZED X cameras and install SDK 5.0.5 and ZEDX Driver 1.3.1. The cameras get detected, however, we are not able to get dat…

---

## [SeeedStudio Orin NX j4012 compatibility with ZedX Cameras](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626)

<div class="topic-metadata">

**Author:** [@mattiamedinno](https://community.stereolabs.com/u/mattiamedinno)\
**Replies:** 3\
**Last updated:** [August 11, 2025, 10:15am UTC](https://community.stereolabs.com/t/seeedstudio-orin-nx-j4012-compatibility-with-zedx-cameras/9626 "2025-08-11T10:15:30Z")

</div>

We bought two zed X cameras, connected to the Zed link Duo (GMSL2), powered through the CSI of a reComputer Industrial J4012 with Jetson Orin™ NX 16GB. However, zed cameras are not detected. jetpack 6.1.0 L4T 36.4, wit…

---

## [ZED X Capture Card Duo Not Detected & Overheating After SDK 5.0.5, ZED Link 1.3.1 Update on jetson orin nano running on JetPack 6.2.1](https://community.stereolabs.com/t/zed-x-capture-card-duo-not-detected-overheating-after-sdk-5-0-5-zed-link-1-3-1-update-on-jetson-orin-nano-running-on-jetpack-6-2-1/9596)

<div class="topic-metadata">

**Author:** [@Hamdan](https://community.stereolabs.com/u/Hamdan)\
**Replies:** 14\
**Last updated:** [August 5, 2025, 12:30pm UTC](https://community.stereolabs.com/t/zed-x-capture-card-duo-not-detected-overheating-after-sdk-5-0-5-zed-link-1-3-1-update-on-jetson-orin-nano-running-on-jetpack-6-2-1/9596 "2025-08-05T12:30:45Z")

</div>

After updating my ZED SDK to v5.0.5 and the driver to 1.3.1 on my Jetson Orin (JetPack 6.2.1), my capture card duo has started behaving abnormally. The camera was working fine on the previous setup, but since the update,…

---

## [Zedx cameras not detected](https://community.stereolabs.com/t/zedx-cameras-not-detected/8972)

<div class="topic-metadata">

**Author:** [@ThuanTerraForce](https://community.stereolabs.com/u/ThuanTerraForce)\
**Replies:** 3\
**Last updated:** [July 21, 2025, 3:15pm UTC](https://community.stereolabs.com/t/zedx-cameras-not-detected/8972 "2025-07-21T15:15:39Z")

</div>

Hello, Three of our ZEDx cameras are not functioning. While the Jetson board detects the I²C device and loads the ZEDx driver, it consistently fails to initialize the AR0234 sensor. Here’s a relevant dmesg excerpt: zed…

---

## [How to improve point cloud frame rate on Orin NX (16GB) + ZED X via GMSL2 Capture Card Mono](https://community.stereolabs.com/t/how-to-improve-point-cloud-frame-rate-on-orin-nx-16gb-zed-x-via-gmsl2-capture-card-mono/9408)

<div class="topic-metadata">

**Author:** [@Lincoln\_Liu](https://community.stereolabs.com/u/Lincoln_Liu)\
**Replies:** 2\
**Last updated:** [July 16, 2025, 11:21am UTC](https://community.stereolabs.com/t/how-to-improve-point-cloud-frame-rate-on-orin-nx-16gb-zed-x-via-gmsl2-capture-card-mono/9408 "2025-07-16T11:21:34Z")

</div>

Hi all, I’m currently using the ZED X camera with a GMSL2 Capture Card Mono connected to an NVIDIA Jetson Orin NX (16GB), running on the official NVIDIA Orin Nano Dev Kit carrier board. I’m using ROS and the Stereolabs …

---

## [360 degree person tracking usnig zedx and Jetson Orin AGX](https://community.stereolabs.com/t/360-degree-person-tracking-usnig-zedx-and-jetson-orin-agx/9362)

<div class="topic-metadata">

**Author:** [@Alireza](https://community.stereolabs.com/u/Alireza)\
**Replies:** 3\
**Last updated:** [July 12, 2025, 11:00am UTC](https://community.stereolabs.com/t/360-degree-person-tracking-usnig-zedx-and-jetson-orin-agx/9362 "2025-07-12T11:00:49Z")

</div>

Hi I am using Jetson Orin AGX and a zedx with no issues. I like to extend the robot’s FOV to 360 degrees. I am considering using 4 "zed x"s, buying 3 more, with a Quad card. Do I need or recommended to buy anything e…

---

## [ZED X not working with Orin NX and Link Mono](https://community.stereolabs.com/t/zed-x-not-working-with-orin-nx-and-link-mono/9306)

<div class="topic-metadata">

**Author:** [@nicooblisz](https://community.stereolabs.com/u/nicooblisz)\
**Replies:** 1\
**Last updated:** [July 8, 2025, 12:29pm UTC](https://community.stereolabs.com/t/zed-x-not-working-with-orin-nx-and-link-mono/9306 "2025-07-08T12:29:51Z")

</div>

I’ve setup a ZED X with a NVIDIA Jetson Orin Nano Dev. Kit and the ZED Link Mono Capture Card. ZED\_Explorer doesn’t detect a camera and dmesg shows a lot of errors. I can’t upload images but the hardware is connected ac…

---

## [Zed X One 4K overexposed during daytime direct lighting outdoor conditions](https://community.stereolabs.com/t/zed-x-one-4k-overexposed-during-daytime-direct-lighting-outdoor-conditions/9260)

<div class="topic-metadata">

**Author:** [@Lrnts](https://community.stereolabs.com/u/Lrnts)\
**Replies:** 2\
**Last updated:** [July 6, 2025, 5:44pm UTC](https://community.stereolabs.com/t/zed-x-one-4k-overexposed-during-daytime-direct-lighting-outdoor-conditions/9260 "2025-07-06T17:44:54Z")

</div>

Hello, I am reaching out regarding an overexposure issue during the daytime with direct lighting conditions in an outdoor environment. I am using the Zed X One 4K GMSL camera with the Zed Link Duo capture card on Jetson…

---

## [Zedx Mono on Orin NX + Seedstudio A603](https://community.stereolabs.com/t/zedx-mono-on-orin-nx-seedstudio-a603/9179)

<div class="topic-metadata">

**Author:** [@grizzi](https://community.stereolabs.com/u/grizzi)\
**Replies:** 1\
**Last updated:** [June 26, 2025, 12:16pm UTC](https://community.stereolabs.com/t/zedx-mono-on-orin-nx-seedstudio-a603/9179 "2025-06-26T12:16:55Z")

</div>

Hello, I have been trying, unsuccessfully, to connect to the ZEDx mini over the Zen Link Mono card using on the Jetson Orin NX featuring a seedstudio a603 carrier board. I have followed the instructions as for the Orin…

---

## [ZED X One Lens Swap](https://community.stereolabs.com/t/zed-x-one-lens-swap/9165)

<div class="topic-metadata">

**Author:** [@jdcast](https://community.stereolabs.com/u/jdcast)\
**Replies:** 1\
**Last updated:** [June 25, 2025, 6:42pm UTC](https://community.stereolabs.com/t/zed-x-one-lens-swap/9165 "2025-06-25T18:42:26Z")

</div>

I have some zed x one cameras with a the 2.2mm lens option installed. I’d like to know if it’s possible to swap out that lens for another M12 s-mount lens? I’ve seen this older post and I’m not sure if this means that …

[Previous page](https://community.stereolabs.com/c/hw/zed-x/19.md?page=2)

[Next page](https://community.stereolabs.com/c/hw/zed-x/19.md?page=4)
