# ZED X

**URL:** https://community.stereolabs.com/c/hw/zed-x/19.md

[Latest](https://community.stereolabs.com/latest.md) · [Categories](https://community.stereolabs.com/categories.md) · [Tags](https://community.stereolabs.com/tags.md)

---

## [About the ZED X category](https://community.stereolabs.com/t/about-the-zed-x-category/4156)

<div class="topic-metadata">

**Author:** [@adujardin](https://community.stereolabs.com/u/adujardin)\
**Replies:** 0

</div>

---

## [Is it possible to perform re-focusing and calibration?](https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856)

<div class="topic-metadata">

**Author:** [@sekiwada0](https://community.stereolabs.com/u/sekiwada0)\
**Replies:** 1\
**Last updated:** [November 19, 2026, 3:36pm UTC](https://community.stereolabs.com/t/is-it-possible-to-perform-re-focusing-and-calibration/11856 "2026-11-19T15:36:09Z")

</div>

Dear support tem, I am using a ZED X Mini, with firmware version 2001. I intend to perform multi-camera calibration using two ZED cameras and ChArUco markers. The images captured at a distance of 2500 mm from the mark…

---

## [Latency ZED X Mini / GSML2](https://community.stereolabs.com/t/latency-zed-x-mini-gsml2/9999)

<div class="topic-metadata">

**Author:** [@Wikingererik2001](https://community.stereolabs.com/u/Wikingererik2001)\
**Replies:** 13\
**Last updated:** [November 17, 2026, 6:11pm UTC](https://community.stereolabs.com/t/latency-zed-x-mini-gsml2/9999 "2026-11-17T18:11:57Z")

</div>

Hi together, what are the current latencies for using your GSML2 cameras, especially ZED X mini? (in combination with 1) Your capture cards or 2) ZED Box mini directly I read you had some problems with that one year ag…

---

## [Is ZED X One S compatible with Holoscan sensor bridge?](https://community.stereolabs.com/t/is-zed-x-one-s-compatible-with-holoscan-sensor-bridge/11847)

<div class="topic-metadata">

**Author:** [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Replies:** 1\
**Last updated:** [November 16, 2026, 5:24pm UTC](https://community.stereolabs.com/t/is-zed-x-one-s-compatible-with-holoscan-sensor-bridge/11847 "2026-11-16T17:24:21Z")

</div>

Is ZED X One S GMSL version compatible with Holoscan Sensor Bridge that goes into a Thor devkit ? I see the ZED Link Mipi Quad, but is there a ZED Link GMSL Quad ? If not is there any plans for a GMSL to Mipi Deserializ…

---

## [Weird Allan-Variance Plot for Gygroscope | ZED X](https://community.stereolabs.com/t/weird-allan-variance-plot-for-gygroscope-zed-x/11811)

<div class="topic-metadata">

**Author:** [@j3r3](https://community.stereolabs.com/u/j3r3)\
**Replies:** 3\
**Last updated:** [October 26, 2026, 10:05am UTC](https://community.stereolabs.com/t/weird-allan-variance-plot-for-gygroscope-zed-x/11811 "2026-10-26T10:05:42Z")

</div>

Dear all, I did an Allan-Variance analysis on my ZED X internal raw IMU stream. I recorded IMU measurements via ROS2 for 11.5 hours with a sampling and publising rate of 200Hz. I used the allan\_variance\_ros tool and fol…

---

## [ZED X IMU sampling rate stuck at ~195Hz instead of 400Hz](https://community.stereolabs.com/t/zed-x-imu-sampling-rate-stuck-at-195hz-instead-of-400hz/11037)

<div class="topic-metadata">

**Author:** [@TerryL-TongjiU](https://community.stereolabs.com/u/TerryL-TongjiU)\
**Replies:** 3\
**Last updated:** [October 23, 2026, 3:44pm UTC](https://community.stereolabs.com/t/zed-x-imu-sampling-rate-stuck-at-195hz-instead-of-400hz/11037 "2026-10-23T15:44:46Z")

</div>

Issue: According to the official datasheet, the ZED X accelerometer should run at 400Hz. However, we are observing a consistent ~195–200Hz fluctuation (when using ZED X S/N: 40200550 & ZED Box) in two separate scenarios…

---

## [Request for Updated Example SVO Dataset for Testing with ZED X](https://community.stereolabs.com/t/request-for-updated-example-svo-dataset-for-testing-with-zed-x/11810)

<div class="topic-metadata">

**Author:** [@l.centorame](https://community.stereolabs.com/u/l.centorame)\
**Replies:** 1\
**Last updated:** [October 22, 2026, 9:21pm UTC](https://community.stereolabs.com/t/request-for-updated-example-svo-dataset-for-testing-with-zed-x/11810 "2026-10-22T21:21:25Z")

</div>

Hello everyone, I’m currently waiting for my ZED X to arrive, but in the meantime I’d like to start developing and testing my Python scripts with the ZED SDK. The stereo camera is part of an ambitious project for 3D sca…

---

## [ZED Link Quad: ZED X One captures ~40 ms after ZED X Mini despite hardware sync](https://community.stereolabs.com/t/zed-link-quad-zed-x-one-captures-40-ms-after-zed-x-mini-despite-hardware-sync/11758)

<div class="topic-metadata">

**Author:** [@tomas.spurny](https://community.stereolabs.com/u/tomas.spurny)\
**Replies:** 5\
**Last updated:** [October 16, 2026, 9:12am UTC](https://community.stereolabs.com/t/zed-link-quad-zed-x-one-captures-40-ms-after-zed-x-mini-despite-hardware-sync/11758 "2026-10-16T09:12:41Z")

</div>

Hi everyone, I run two ZED X Mini and two ZED X One UHD on one ZED Link Quad (Jetson AGX Orin), configured for synchronized acquisition exactly as in the (ZED Link Quad on AGX Orin | StereoLabs): sync\_mode=1 plus a wire…

---

## [ZED X One: IMU temperature read livelocks CPU 0 for hours on the RT kernel (rpm\_resume in tegra\_i2c\_xfer), ending in a hard reset](https://community.stereolabs.com/t/zed-x-one-imu-temperature-read-livelocks-cpu-0-for-hours-on-the-rt-kernel-rpm-resume-in-tegra-i2c-xfer-ending-in-a-hard-reset/11790)

<div class="topic-metadata">

**Author:** [@deepanaishtaweera](https://community.stereolabs.com/u/deepanaishtaweera)\
**Replies:** 1\
**Last updated:** [October 12, 2026, 12:49pm UTC](https://community.stereolabs.com/t/zed-x-one-imu-temperature-read-livelocks-cpu-0-for-hours-on-the-rt-kernel-rpm-resume-in-tegra-i2c-xfer-ending-in-a-hard-reset/11790 "2026-10-12T12:49:39Z")

</div>

Setup Jetson AGX Orin, L4T R36.4.7, RT kernel 5.15.148-rt-tegra (CONFIG\_PREEMPT\_RT=y) ZED Link Duo driver stereolabs-zedlink-duo 1.4.3-LI-MAX96712-rt-L4T36.4.0 One ZED X One 4K (zedxone\_uhd), ZED SDK 5.4.1, zed-ros2-wr…

---

## [ZED X Camera Connection Disconnection Occurred](https://community.stereolabs.com/t/zed-x-camera-connection-disconnection-occurred/11762)

<div class="topic-metadata">

**Author:** [@lth8484](https://community.stereolabs.com/u/lth8484)\
**Replies:** 1\
**Last updated:** [September 30, 2026, 8:24pm UTC](https://community.stereolabs.com/t/zed-x-camera-connection-disconnection-occurred/11762 "2026-09-30T20:24:11Z")

</div>

Hello, While using a ZED X camera connected to an Orin NX 16GB, the connection was lost and logs similar to those in the attached file were generated. We attempted to restart the daemon to reconnect, but the attempt fa…

---

## [ZED X Mini Corrupt Sensor Serial Number On Zed Box Duo (2nd time)](https://community.stereolabs.com/t/zed-x-mini-corrupt-sensor-serial-number-on-zed-box-duo-2nd-time/11753)

<div class="topic-metadata">

**Author:** [@devin](https://community.stereolabs.com/u/devin)\
**Replies:** 1\
**Last updated:** [September 30, 2026, 4:13pm UTC](https://community.stereolabs.com/t/zed-x-mini-corrupt-sensor-serial-number-on-zed-box-duo-2nd-time/11753 "2026-09-30T16:13:56Z")

</div>

I have a ZED X Mini connected to a ZED Box Duo (Jetson Orin NX 16GB, JetPack 6.0 / L4T 36.3.0) that is no longer being detected. This is the second time this exact failure has happened. After the first time, the camera w…

---

## [Weird frame rate behavior on GMSL Zed X Mini with AGX Orin](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728)

<div class="topic-metadata">

**Author:** [@Fedezac](https://community.stereolabs.com/u/Fedezac)\
**Replies:** 6\
**Last updated:** [September 28, 2026, 12:38pm UTC](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728 "2026-09-28T12:38:40Z")

</div>

Hello there, we have been having some issues with the framerate of Zed Mini cameras. Our setup is as follows: Jetson AGX Orin board (Jetpack R36.5, ZED sdk 5.4.1), ZED Quad capture card (driver 1.4.3.), 2x ZED X Mini co…

---

## [Motion tracking using additional Azimuth and Elevation motors](https://community.stereolabs.com/t/motion-tracking-using-additional-azimuth-and-elevation-motors/11725)

<div class="topic-metadata">

**Author:** [@antrossall](https://community.stereolabs.com/u/antrossall)\
**Replies:** 1\
**Last updated:** [September 16, 2026, 1:59pm UTC](https://community.stereolabs.com/t/motion-tracking-using-additional-azimuth-and-elevation-motors/11725 "2026-09-16T13:59:01Z")

</div>

Hi, I’m currently working on a project to track objects, namely drones, at close range for training purposes. We want to use the ZED X 4mm due to its global shutter and greater ranging but that comes with the downside of…

---

## [ZED Link Duo driver fails to add GMSL2/max96712 nodes on L4T 36.5.0 (p3768 carrier)](https://community.stereolabs.com/t/zed-link-duo-driver-fails-to-add-gmsl2-max96712-nodes-on-l4t-36-5-0-p3768-carrier/11708)

<div class="topic-metadata">

**Author:** [@MaxPacheco02](https://community.stereolabs.com/u/MaxPacheco02)\
**Replies:** 1\
**Last updated:** [September 8, 2026, 10:53am UTC](https://community.stereolabs.com/t/zed-link-duo-driver-fails-to-add-gmsl2-max96712-nodes-on-l4t-36-5-0-p3768-carrier/11708 "2026-09-08T10:53:36Z")

</div>

Hi, I’m setting up a ZED Link Duo GMSL2 capture card on a Jetson Orin (p3768 carrier board) running Jetson Linux (L4T) R36.5.0. The driver installs without error, but ZED Diagnostics reports no GMSL driver found, and I’…

---

## [Alternative to Fakra connectivity](https://community.stereolabs.com/t/alternative-to-fakra-connectivity/10043)

<div class="topic-metadata">

**Author:** [@Costas99](https://community.stereolabs.com/u/Costas99)\
**Replies:** 2\
**Last updated:** [September 3, 2026, 1:44pm UTC](https://community.stereolabs.com/t/alternative-to-fakra-connectivity/10043 "2026-09-03T13:44:11Z")

</div>

Dear Stereolabs Support Team, We are aiming to use a ZED X stereo camera with a ZED Box Orin NX for our applications. The system relies on the GMSL2 FAKRA-Z extension cable for the connection between the camera and the …

---

## [GSML2 Fakra quick disconnect for junction box #hw](https://community.stereolabs.com/t/gsml2-fakra-quick-disconnect-for-junction-box-hw/11692)

<div class="topic-metadata">

**Author:** [@ravishing833](https://community.stereolabs.com/u/ravishing833)\
**Replies:** 1\
**Last updated:** [September 3, 2026, 10:08am UTC](https://community.stereolabs.com/t/gsml2-fakra-quick-disconnect-for-junction-box-hw/11692 "2026-09-03T10:08:44Z")

</div>

I want to be able to panel mount the connection between my cameras on a moving robot arm, and the junction box which has the jetson nano inside. This is a virtual stereo pair of the ZED x one cameras. The idea is simply …

---

## [improvment of Zed X 2.2mm in no light scenaios](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671)

<div class="topic-metadata">

**Author:** [@Jai](https://community.stereolabs.com/u/Jai)\
**Replies:** 2\
**Last updated:** [August 28, 2026, 10:29am UTC](https://community.stereolabs.com/t/improvment-of-zed-x-2-2mm-in-no-light-scenaios/11671 "2026-08-28T10:29:55Z")

</div>

Hey everyone, I’m currently developing an autonomous UGV intended primarily for nighttime and low/zero-light operations. I’m using a Stereolabs ZED X (2.2mm wide-angle lens) as the primary vision sensor for depth estima…

---

## [Are Zed X Cameras compatible Product Add to cart proFRAME Base Board 3.0 PCIe](https://community.stereolabs.com/t/are-zed-x-cameras-compatible-product-add-to-cart-proframe-base-board-3-0-pcie/9482)

<div class="topic-metadata">

**Author:** [@tpe](https://community.stereolabs.com/u/tpe)\
**Replies:** 3\
**Last updated:** [August 27, 2026, 2:28pm UTC](https://community.stereolabs.com/t/are-zed-x-cameras-compatible-product-add-to-cart-proframe-base-board-3-0-pcie/9482 "2026-08-27T14:28:30Z")

</div>

Hi, I would like to know if the Zed X GSML cameras are compatible with something like this: proFRAME Base Board 3.0 PCIe In short is a PCIe Board that would allow for up to 8 GSML cameras to be connected to a regular x8…

---

## [ZED Cameras w/o Lens not Working](https://community.stereolabs.com/t/zed-cameras-w-o-lens-not-working/11647)

<div class="topic-metadata">

**Author:** [@adeep.das](https://community.stereolabs.com/u/adeep.das)\
**Replies:** 1\
**Last updated:** [August 22, 2026, 12:19am UTC](https://community.stereolabs.com/t/zed-cameras-w-o-lens-not-working/11647 "2026-08-22T00:19:39Z")

</div>

I recently bought a ZED XOne S Camera without Lens and a ZED XOne GS Camera without Lens. I first mounted on a lens on the camera. Then, I wanted to preview it on ZED Studio but it wouldn’t work because of invalid calibr…

---

## [low fps when connected to Zed x cameras. ](https://community.stereolabs.com/t/low-fps-when-connected-to-zed-x-cameras/11608)

<div class="topic-metadata">

**Author:** [@narsimha](https://community.stereolabs.com/u/narsimha)\
**Replies:** 6\
**Last updated:** [August 5, 2026, 3:37pm UTC](https://community.stereolabs.com/t/low-fps-when-connected-to-zed-x-cameras/11608 "2026-08-05T15:37:00Z")

</div>

In the docs it was mentioned that we can connect 4 Zed x cameras to a Zed box orin and stream at HD1200@30fps. But empirically we only measured 14-16 fps when streaming from four cameras (depth disabled). According to th…

---

## [Intermittent connection issue on GMSL connector – ZED X 4mm Camera](https://community.stereolabs.com/t/intermittent-connection-issue-on-gmsl-connector-zed-x-4mm-camera/11603)

<div class="topic-metadata">

**Author:** [@daniel.mirs](https://community.stereolabs.com/u/daniel.mirs)\
**Replies:** 1\
**Last updated:** [August 4, 2026, 3:42pm UTC](https://community.stereolabs.com/t/intermittent-connection-issue-on-gmsl-connector-zed-x-4mm-camera/11603 "2026-08-04T15:42:30Z")

</div>

Dear Support Team, I am writing to you on behalf of Mirs Robotics. We are currently experiencing a peculiar issue with a ZED X 4mm camera, which loses its connection without any apparent reason. The device is in perfe…

---

## [ZED X grab stuck in FAILURE after Argus / ZED-X daemon failure](https://community.stereolabs.com/t/zed-x-grab-stuck-in-failure-after-argus-zed-x-daemon-failure/11590)

<div class="topic-metadata">

**Author:** [@matialmar](https://community.stereolabs.com/u/matialmar)\
**Replies:** 3\
**Last updated:** [August 4, 2026, 2:51pm UTC](https://community.stereolabs.com/t/zed-x-grab-stuck-in-failure-after-argus-zed-x-daemon-failure/11590 "2026-08-04T14:51:55Z")

</div>

Hi there! We are currently developing a perception solution using the ZED X Camera and Orin NX. And currently facing the problems using the zed-ros2-wrapper with sporadic reboots and failures. The core problem While a …

---

## [Understanding Slave mode on the Quad capture card](https://community.stereolabs.com/t/understanding-slave-mode-on-the-quad-capture-card/10777)

<div class="topic-metadata">

**Author:** [@Parv-Maheshwari](https://community.stereolabs.com/u/Parv-Maheshwari)\
**Replies:** 20\
**Last updated:** [August 3, 2026, 12:31am UTC](https://community.stereolabs.com/t/understanding-slave-mode-on-the-quad-capture-card/10777 "2026-08-03T00:31:25Z")

</div>

Regarding slave mode on the quad capture card for Zedx, how are the camera capture time, exposure start/end times, and image timestamps related to the input trigger? With the master mode, it is clearly documented that T…

---

## [ZED X and ZED X mini Integration with Custom SOC chip(without the CUDA ecosystem)](https://community.stereolabs.com/t/zed-x-and-zed-x-mini-integration-with-custom-soc-chip-without-the-cuda-ecosystem/11581)

<div class="topic-metadata">

**Author:** [@Jumby](https://community.stereolabs.com/u/Jumby)\
**Replies:** 1\
**Last updated:** [July 29, 2026, 3:30pm UTC](https://community.stereolabs.com/t/zed-x-and-zed-x-mini-integration-with-custom-soc-chip-without-the-cuda-ecosystem/11581 "2026-07-29T15:30:09Z")

</div>

Hello, We are currently developing a custom embedded system that interfaces with the StereoLabs one ZED X and one ZED X mini camera via GMSL2, but not using the ZED Link capture card. Instead, we are utilizing our own c…

---

## [Camera Connection Issues](https://community.stereolabs.com/t/camera-connection-issues/11436)

<div class="topic-metadata">

**Author:** [@TheFujirose](https://community.stereolabs.com/u/TheFujirose)\
**Replies:** 3\
**Last updated:** [July 26, 2026, 5:46pm UTC](https://community.stereolabs.com/t/camera-connection-issues/11436 "2026-07-26T17:46:38Z")

</div>

Camera Connection Issues Hello, Myzhar! I hope your day or evening is well. I am working with a small student club competing in multiple robot competition. We have very little funding and are having issues with camera s…

---

## [ZED Link Duo + ZED X not detected on AGX Xavier (JetPack 5.1.2) ](https://community.stereolabs.com/t/zed-link-duo-zed-x-not-detected-on-agx-xavier-jetpack-5-1-2/11504)

<div class="topic-metadata">

**Author:** [@yupinghsuin](https://community.stereolabs.com/u/yupinghsuin)\
**Replies:** 6\
**Last updated:** [July 9, 2026, 5:32pm UTC](https://community.stereolabs.com/t/zed-link-duo-zed-x-not-detected-on-agx-xavier-jetpack-5-1-2/11504 "2026-07-09T17:32:59Z")

</div>

Hi Stereolabs Team, I am having trouble getting my ZED X camera to work with the ZED Link Duo capture card on an NVIDIA Jetson AGX Xavier Developer Kit. The system cannot detect any signal from the camera. When I power…

---

## [Whether it can be supported 25m or not](https://community.stereolabs.com/t/whether-it-can-be-supported-25m-or-not/11027)

<div class="topic-metadata">

**Author:** [@RyanLee](https://community.stereolabs.com/u/RyanLee)\
**Replies:** 2\
**Last updated:** [June 22, 2026, 11:50am UTC](https://community.stereolabs.com/t/whether-it-can-be-supported-25m-or-not/11027 "2026-06-22T11:50:45Z")

</div>

Hi, We are using ZED X and hope to check whether 25m distance are possible or not via GMSL 2 cable. Or if not, Could you recommend any solution to overcome this issue for us? Best regards, Ryan.

---

## [Using Robotics 360 Perception Kit with Jetson Thor.](https://community.stereolabs.com/t/using-robotics-360-perception-kit-with-jetson-thor/11358)

<div class="topic-metadata">

**Author:** [@tech](https://community.stereolabs.com/u/tech)\
**Replies:** 0\
**Last updated:** [May 27, 2026, 3:03pm UTC](https://community.stereolabs.com/t/using-robotics-360-perception-kit-with-jetson-thor/11358 "2026-05-27T15:03:54Z")

</div>

Hi everyone, We are currently using the Stereolabs Robotics 360 Perception Kit with a Jetson AGX Orin and four ZED X cameras connected through the ZED Link Quad capture card. For our next research setup, we are conside…

---

## [ZED X drivers for TZTEK YS-X1-32G](https://community.stereolabs.com/t/zed-x-drivers-for-tztek-ys-x1-32g/11338)

<div class="topic-metadata">

**Author:** [@dbarinov](https://community.stereolabs.com/u/dbarinov)\
**Replies:** 2\
**Last updated:** [May 25, 2026, 8:09am UTC](https://community.stereolabs.com/t/zed-x-drivers-for-tztek-ys-x1-32g/11338 "2026-05-25T08:09:28Z")

</div>

Hello, We are planning to use Stereolabs ZED X MINI and NANO GMSL2 cameras on a TZTEK YS-X1-32G / NVIDIA Jetson AGX Orin platform. Current system: L4T R36.4.3 Kernel: 5.15.148-tegra SoC: NVIDIA Jetson AGX Orin / te…

---

## [Svo2 recordings cannot open with SDK V5.3](https://community.stereolabs.com/t/svo2-recordings-cannot-open-with-sdk-v5-3/11322)

<div class="topic-metadata">

**Author:** [@NivC](https://community.stereolabs.com/u/NivC)\
**Replies:** 7\
**Last updated:** [May 20, 2026, 1:26pm UTC](https://community.stereolabs.com/t/svo2-recordings-cannot-open-with-sdk-v5-3/11322 "2026-05-20T13:26:12Z")

</div>

Hi, After updating the ZED SDK to V5.3 , I am having issues with SVO2 recording when using ZED X One cameras. I am trying to record using ZED Studio. The recording process appears to complete and a file is saved, but w…

[Next page](https://community.stereolabs.com/c/hw/zed-x/19.md?page=1)
