# Hardware

**URL:** https://community.stereolabs.com/c/hw/5.md

[Latest](https://community.stereolabs.com/latest.md) · [Categories](https://community.stereolabs.com/categories.md) · [Tags](https://community.stereolabs.com/tags.md)

---

## [About the Hardware category](https://community.stereolabs.com/t/about-the-hardware-category/25)

<div class="topic-metadata">

**Author:** [@adujardin](https://community.stereolabs.com/u/adujardin)\
**Replies:** 0

</div>

Category related to the hardware questions, like the ZED cameras dimensions, sensors characteristics, and other similar inquiries

---

## [Is ZED X One S compatible with Holoscan sensor bridge?](https://community.stereolabs.com/t/is-zed-x-one-s-compatible-with-holoscan-sensor-bridge/11847)

<div class="topic-metadata">

**Author:** [@snknitheesh](https://community.stereolabs.com/u/snknitheesh)\
**Replies:** 1\
**Last updated:** [November 16, 2026, 5:24pm UTC](https://community.stereolabs.com/t/is-zed-x-one-s-compatible-with-holoscan-sensor-bridge/11847 "2026-11-16T17:24:21Z")

</div>

Is ZED X One S GMSL version compatible with Holoscan Sensor Bridge that goes into a Thor devkit ? I see the ZED Link Mipi Quad, but is there a ZED Link GMSL Quad ? If not is there any plans for a GMSL to Mipi Deserializ…

---

## [Follow up on Zed X Nano](https://community.stereolabs.com/t/follow-up-on-zed-x-nano/11839)

<div class="topic-metadata">

**Author:** [@bruce42](https://community.stereolabs.com/u/bruce42)\
**Replies:** 2\
**Last updated:** [November 6, 2026, 5:40pm UTC](https://community.stereolabs.com/t/follow-up-on-zed-x-nano/11839 "2026-11-06T17:40:50Z")

</div>

Missed the reply window on the other thread. :man\_facepalming: So, we have a legged bot and needed accurate ground scanning, but only in certain areas. We don’t know where until we have a rough scan. Now we do it as we …

---

## [Terrific engineering work](https://community.stereolabs.com/t/terrific-engineering-work/11807)

<div class="topic-metadata">

**Author:** [@bruce42](https://community.stereolabs.com/u/bruce42)\
**Replies:** 2\
**Last updated:** [November 4, 2026, 10:17am UTC](https://community.stereolabs.com/t/terrific-engineering-work/11807 "2026-11-04T10:17:18Z")

</div>

Looking at the range of focus of the Zed X Nano. Just wanted to pass along a “great work”. The optics, imager choice, IMU are so very well balanced. X Nano has solved a difficult problem we have been struggling. s/Bruc…

---

## [ZED Box Orin NX 16GB wont turn on](https://community.stereolabs.com/t/zed-box-orin-nx-16gb-wont-turn-on/11833)

<div class="topic-metadata">

**Author:** [@Zuka](https://community.stereolabs.com/u/Zuka)\
**Replies:** 1\
**Last updated:** [November 2, 2026, 9:14pm UTC](https://community.stereolabs.com/t/zed-box-orin-nx-16gb-wont-turn-on/11833 "2026-11-02T21:14:10Z")

</div>

ZED Box Orin NX 16GB (hostname GTW-ONX16-ubuntu, serial number on the label: GTW-ONX1-C1VBM00O, purchased no longer powers on. What happened 2026-11-01 ~10:40 (Tbilisi, UTC+4): the box was running normally (JetPack 6 …

---

## [Unity Crash/Freeze when using Body Tracker](https://community.stereolabs.com/t/unity-crash-freeze-when-using-body-tracker/11812)

<div class="topic-metadata">

**Author:** [@smietanr](https://community.stereolabs.com/u/smietanr)\
**Replies:** 4\
**Last updated:** [October 30, 2026, 5:13pm UTC](https://community.stereolabs.com/t/unity-crash-freeze-when-using-body-tracker/11812 "2026-10-30T17:13:56Z")

</div>

As the title says, whenever I try to use Body Tracking sample, my Unity freezes after 10-20 seconds and I’m forced to smother it with Task Manger. I used the ZED diagnostic tool to optimize the AI models.

---

## [GPIO Triggering on ZED Box 2 Max - T5000](https://community.stereolabs.com/t/gpio-triggering-on-zed-box-2-max-t5000/11825)

<div class="topic-metadata">

**Author:** [@poel\_da](https://community.stereolabs.com/u/poel_da)\
**Replies:** 1\
**Last updated:** [October 29, 2026, 6:57pm UTC](https://community.stereolabs.com/t/gpio-triggering-on-zed-box-2-max-t5000/11825 "2026-10-29T18:57:51Z")

</div>

We are thinking of getting a ZED Box 2 Max - T5000. Is the GPIO Triggering like for the ZED Link Capture Cards also available on this platform? We currently use trigger signals for our ZED X cameras and would like to con…

---

## [Dead Pixels across ZED cameras](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821)

<div class="topic-metadata">

**Author:** [@s.ven](https://community.stereolabs.com/u/s.ven)\
**Replies:** 2\
**Last updated:** [October 29, 2026, 4:24pm UTC](https://community.stereolabs.com/t/dead-pixels-across-zed-cameras/11821 "2026-10-29T16:24:50Z")

</div>

Hello, I’ve noticed that there are pixels on every one of our cameras that has some artifact that resembles a dead / stuck pixel. Example images: These pixels are usually white, sometimes red. It is not noi…

---

## [RT GMSL2 Driver for ZED Box 2 Max - T5000](https://community.stereolabs.com/t/rt-gmsl2-driver-for-zed-box-2-max-t5000/11827)

<div class="topic-metadata">

**Author:** [@poel\_da](https://community.stereolabs.com/u/poel_da)\
**Replies:** 0\
**Last updated:** [October 29, 2026, 2:11pm UTC](https://community.stereolabs.com/t/rt-gmsl2-driver-for-zed-box-2-max-t5000/11827 "2026-10-29T14:11:10Z")

</div>

Hello, We are interested in the ZED Box 2 Max - T5000. Currently we are using a AGX Orin DevKit with the JetPack RT Kernel activated together with the JetPack RT Driver for the ZED Link Capture card. Is there also a RT …

---

## [Weird Allan-Variance Plot for Gygroscope | ZED X](https://community.stereolabs.com/t/weird-allan-variance-plot-for-gygroscope-zed-x/11811)

<div class="topic-metadata">

**Author:** [@j3r3](https://community.stereolabs.com/u/j3r3)\
**Replies:** 3\
**Last updated:** [October 26, 2026, 10:05am UTC](https://community.stereolabs.com/t/weird-allan-variance-plot-for-gygroscope-zed-x/11811 "2026-10-26T10:05:42Z")

</div>

Dear all, I did an Allan-Variance analysis on my ZED X internal raw IMU stream. I recorded IMU measurements via ROS2 for 11.5 hours with a sampling and publising rate of 200Hz. I used the allan\_variance\_ros tool and fol…

---

## [ZED X IMU sampling rate stuck at ~195Hz instead of 400Hz](https://community.stereolabs.com/t/zed-x-imu-sampling-rate-stuck-at-195hz-instead-of-400hz/11037)

<div class="topic-metadata">

**Author:** [@TerryL-TongjiU](https://community.stereolabs.com/u/TerryL-TongjiU)\
**Replies:** 3\
**Last updated:** [October 23, 2026, 3:44pm UTC](https://community.stereolabs.com/t/zed-x-imu-sampling-rate-stuck-at-195hz-instead-of-400hz/11037 "2026-10-23T15:44:46Z")

</div>

Issue: According to the official datasheet, the ZED X accelerometer should run at 400Hz. However, we are observing a consistent ~195–200Hz fluctuation (when using ZED X S/N: 40200550 & ZED Box) in two separate scenarios…

---

## [Request for Updated Example SVO Dataset for Testing with ZED X](https://community.stereolabs.com/t/request-for-updated-example-svo-dataset-for-testing-with-zed-x/11810)

<div class="topic-metadata">

**Author:** [@l.centorame](https://community.stereolabs.com/u/l.centorame)\
**Replies:** 1\
**Last updated:** [October 22, 2026, 9:21pm UTC](https://community.stereolabs.com/t/request-for-updated-example-svo-dataset-for-testing-with-zed-x/11810 "2026-10-22T21:21:25Z")

</div>

Hello everyone, I’m currently waiting for my ZED X to arrive, but in the meantime I’d like to start developing and testing my Python scripts with the ZED SDK. The stereo camera is part of an ambitious project for 3D sca…

---

## [ZED X Mini not detected on ZED Box Orin NX 8GB single GMSL2 – MAX9296 probe failed at 9-0048](https://community.stereolabs.com/t/zed-x-mini-not-detected-on-zed-box-orin-nx-8gb-single-gmsl2-max9296-probe-failed-at-9-0048/11799)

<div class="topic-metadata">

**Author:** [@vcatala](https://community.stereolabs.com/u/vcatala)\
**Replies:** 1\
**Last updated:** [October 20, 2026, 12:21pm UTC](https://community.stereolabs.com/t/zed-x-mini-not-detected-on-zed-box-orin-nx-8gb-single-gmsl2-max9296-probe-failed-at-9-0048/11799 "2026-10-20T12:21:47Z")

</div>

Hello, We are having an issue detecting a ZED X Mini connected via GMSL2 to a ZED Box Orin NX 8GB with a single GMSL2 port. We have already performed several hardware and software tests, but the camera is still not dete…

---

## [ZED Box Mini - network connection running through patchbay - Issue?](https://community.stereolabs.com/t/zed-box-mini-network-connection-running-through-patchbay-issue/11800)

<div class="topic-metadata">

**Author:** [@brian1](https://community.stereolabs.com/u/brian1)\
**Replies:** 1\
**Last updated:** [October 20, 2026, 12:14pm UTC](https://community.stereolabs.com/t/zed-box-mini-network-connection-running-through-patchbay-issue/11800 "2026-10-20T12:14:01Z")

</div>

On the installation side, is there a known connection issue if the ZED Box Mini connects to a wall plate which runs back to a patch bay and then to the switch?

---

## [ZED Link Quad: ZED X One captures ~40 ms after ZED X Mini despite hardware sync](https://community.stereolabs.com/t/zed-link-quad-zed-x-one-captures-40-ms-after-zed-x-mini-despite-hardware-sync/11758)

<div class="topic-metadata">

**Author:** [@tomas.spurny](https://community.stereolabs.com/u/tomas.spurny)\
**Replies:** 5\
**Last updated:** [October 16, 2026, 9:12am UTC](https://community.stereolabs.com/t/zed-link-quad-zed-x-one-captures-40-ms-after-zed-x-mini-despite-hardware-sync/11758 "2026-10-16T09:12:41Z")

</div>

Hi everyone, I run two ZED X Mini and two ZED X One UHD on one ZED Link Quad (Jetson AGX Orin), configured for synchronized acquisition exactly as in the (ZED Link Quad on AGX Orin | StereoLabs): sync\_mode=1 plus a wire…

---

## [ZED Box Orin NX – Overvoltage Damage and Repair/RMA Inquiry](https://community.stereolabs.com/t/zed-box-orin-nx-overvoltage-damage-and-repair-rma-inquiry/11755)

<div class="topic-metadata">

**Author:** [@pballesteros](https://community.stereolabs.com/u/pballesteros)\
**Replies:** 3\
**Last updated:** [October 14, 2026, 5:19pm UTC](https://community.stereolabs.com/t/zed-box-orin-nx-overvoltage-damage-and-repair-rma-inquiry/11755 "2026-10-14T17:19:12Z")

</div>

Dear Stereolabs Support Team, I am contacting you regarding a serious issue that occurred with a ZED Box Orin NX. During a system integration session, the power input of the device was accidentally connected to a highe…

---

## [ZED BOX Capture card duo error](https://community.stereolabs.com/t/zed-box-capture-card-duo-error/11232)

<div class="topic-metadata">

**Author:** [@RyanLee](https://community.stereolabs.com/u/RyanLee)\
**Replies:** 5\
**Last updated:** [October 14, 2026, 4:27pm UTC](https://community.stereolabs.com/t/zed-box-capture-card-duo-error/11232 "2026-10-14T16:27:27Z")

</div>

Hi, We are using ZED BOX but it seems we can not detect its capture card(Duo). So i attached the logo for your review. Please help us. Best regards, Ryan. GMSL2\_log\_problem.txt (1.6 KB)

---

## [ZED X One: IMU temperature read livelocks CPU 0 for hours on the RT kernel (rpm\_resume in tegra\_i2c\_xfer), ending in a hard reset](https://community.stereolabs.com/t/zed-x-one-imu-temperature-read-livelocks-cpu-0-for-hours-on-the-rt-kernel-rpm-resume-in-tegra-i2c-xfer-ending-in-a-hard-reset/11790)

<div class="topic-metadata">

**Author:** [@deepanaishtaweera](https://community.stereolabs.com/u/deepanaishtaweera)\
**Replies:** 1\
**Last updated:** [October 12, 2026, 12:49pm UTC](https://community.stereolabs.com/t/zed-x-one-imu-temperature-read-livelocks-cpu-0-for-hours-on-the-rt-kernel-rpm-resume-in-tegra-i2c-xfer-ending-in-a-hard-reset/11790 "2026-10-12T12:49:39Z")

</div>

Setup Jetson AGX Orin, L4T R36.4.7, RT kernel 5.15.148-rt-tegra (CONFIG\_PREEMPT\_RT=y) ZED Link Duo driver stereolabs-zedlink-duo 1.4.3-LI-MAX96712-rt-L4T36.4.0 One ZED X One 4K (zedxone\_uhd), ZED SDK 5.4.1, zed-ros2-wr…

---

## [Unable to boot ZED Box Orin NX | NVIDIA logo -\>black screen-\> continuously blinking \_](https://community.stereolabs.com/t/unable-to-boot-zed-box-orin-nx-nvidia-logo-black-screen-continuously-blinking/11760)

<div class="topic-metadata">

**Author:** [@ashutosh.sahu](https://community.stereolabs.com/u/ashutosh.sahu)\
**Replies:** 1\
**Last updated:** [October 9, 2026, 10:15am UTC](https://community.stereolabs.com/t/unable-to-boot-zed-box-orin-nx-nvidia-logo-black-screen-continuously-blinking/11760 "2026-10-09T10:15:12Z")

</div>

Hello, I have a ZED Box Orin NX 16GB running JetPack 6.2 / L4T 36.4.3. The device stopped booting. The current behavior during boot is: NVIDIA logo → black screen → continuously blinking \_ During this blinking stage,…

---

## [ZED Mini IMU calibration lost - Reason?](https://community.stereolabs.com/t/zed-mini-imu-calibration-lost-reason/7674)

<div class="topic-metadata">

**Author:** [@marti](https://community.stereolabs.com/u/marti)\
**Replies:** 8\
**Last updated:** [October 8, 2026, 2:03pm UTC](https://community.stereolabs.com/t/zed-mini-imu-calibration-lost-reason/7674 "2026-10-08T14:03:52Z")

</div>

We are using ZED Mini cameras for a custom built AR headset. For getting the orientation of our headset we use the camera’s IMU information. From time to time it happens that the IMU calibration information gets lost an…

---

## [NEURAL depth mode silently disabled after a camera-grab error burst — fps rises above the NEURAL ceiling, no error surfaced](https://community.stereolabs.com/t/neural-depth-mode-silently-disabled-after-a-camera-grab-error-burst-fps-rises-above-the-neural-ceiling-no-error-surfaced/11545)

<div class="topic-metadata">

**Author:** [@jeff.crouse](https://community.stereolabs.com/u/jeff.crouse)\
**Replies:** 8\
**Last updated:** [October 7, 2026, 5:19pm UTC](https://community.stereolabs.com/t/neural-depth-mode-silently-disabled-after-a-camera-grab-error-burst-fps-rises-above-the-neural-ceiling-no-error-surfaced/11545 "2026-10-07T17:19:59Z")

</div>

\# NEURAL depth mode silently disabled after a camera-grab error burst — fps rises above the NEURAL ceiling, no error surfaced \*\*Setup:\*\* ZED Box Mini (Jetson Orin, JetPack 6.2 / L4T 36.4), ZED SDK 5.x, Python bindings (…

---

## [ZED Link Capture Card Duo not powering on with Jetson AGX Orin Dev Kit (no LED)](https://community.stereolabs.com/t/zed-link-capture-card-duo-not-powering-on-with-jetson-agx-orin-dev-kit-no-led/11773)

<div class="topic-metadata">

**Author:** [@AyushD](https://community.stereolabs.com/u/AyushD)\
**Replies:** 1\
**Last updated:** [October 7, 2026, 2:22pm UTC](https://community.stereolabs.com/t/zed-link-capture-card-duo-not-powering-on-with-jetson-agx-orin-dev-kit-no-led/11773 "2026-10-07T14:22:30Z")

</div>

Hi, We’re having trouble bringing up a ZED Link Capture Card Duo on a Jetson AGX Orin Developer Kit. The Jetson boots and runs normally, but the capture card shows no sign of life. The status LED never turns on, and con…

---

## [ZED X Camera Connection Disconnection Occurred](https://community.stereolabs.com/t/zed-x-camera-connection-disconnection-occurred/11762)

<div class="topic-metadata">

**Author:** [@lth8484](https://community.stereolabs.com/u/lth8484)\
**Replies:** 1\
**Last updated:** [September 30, 2026, 8:24pm UTC](https://community.stereolabs.com/t/zed-x-camera-connection-disconnection-occurred/11762 "2026-09-30T20:24:11Z")

</div>

Hello, While using a ZED X camera connected to an Orin NX 16GB, the connection was lost and logs similar to those in the attached file were generated. We attempted to restart the daemon to reconnect, but the attempt fa…

---

## [Driver availability ](https://community.stereolabs.com/t/driver-availability/11752)

<div class="topic-metadata">

**Author:** [@michael.sprauve](https://community.stereolabs.com/u/michael.sprauve)\
**Replies:** 1\
**Last updated:** [September 30, 2026, 4:16pm UTC](https://community.stereolabs.com/t/driver-availability/11752 "2026-09-30T16:16:20Z")

</div>

We are looking to use the following 1 ZED X Mini 2.2 mm GMSL2, and 2 Stereolabs ZED X One 4K Wide ZED-422010 GMSL2 I was wondering if there are drivers available for AVerMedia D331 + 61D317GM01AF + Thor T5000 platform …

---

## [ZED X Mini Corrupt Sensor Serial Number On Zed Box Duo (2nd time)](https://community.stereolabs.com/t/zed-x-mini-corrupt-sensor-serial-number-on-zed-box-duo-2nd-time/11753)

<div class="topic-metadata">

**Author:** [@devin](https://community.stereolabs.com/u/devin)\
**Replies:** 1\
**Last updated:** [September 30, 2026, 4:13pm UTC](https://community.stereolabs.com/t/zed-x-mini-corrupt-sensor-serial-number-on-zed-box-duo-2nd-time/11753 "2026-09-30T16:13:56Z")

</div>

I have a ZED X Mini connected to a ZED Box Duo (Jetson Orin NX 16GB, JetPack 6.0 / L4T 36.3.0) that is no longer being detected. This is the second time this exact failure has happened. After the first time, the camera w…

---

## [Weird frame rate behavior on GMSL Zed X Mini with AGX Orin](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728)

<div class="topic-metadata">

**Author:** [@Fedezac](https://community.stereolabs.com/u/Fedezac)\
**Replies:** 6\
**Last updated:** [September 28, 2026, 12:38pm UTC](https://community.stereolabs.com/t/weird-frame-rate-behavior-on-gmsl-zed-x-mini-with-agx-orin/11728 "2026-09-28T12:38:40Z")

</div>

Hello there, we have been having some issues with the framerate of Zed Mini cameras. Our setup is as follows: Jetson AGX Orin board (Jetpack R36.5, ZED sdk 5.4.1), ZED Quad capture card (driver 1.4.3.), 2x ZED X Mini co…

---

## [ZED 2i unexpected runtime error](https://community.stereolabs.com/t/zed-2i-unexpected-runtime-error/11701)

<div class="topic-metadata">

**Author:** [@NielsPointFWD](https://community.stereolabs.com/u/NielsPointFWD)\
**Replies:** 4\
**Last updated:** [September 23, 2026, 6:23am UTC](https://community.stereolabs.com/t/zed-2i-unexpected-runtime-error/11701 "2026-09-23T06:23:19Z")

</div>

Dear, Thus far we have been enjoying the ZED 2i 2mm NP, great SDK, great depth filtering. The ZED 2i 2mm NP had been running for several weeks without any issues. Added another USB camera to the system (USB3 Vision Al…

---

## [ZED Box Orin NX 16GB - JetPack 7.2 flash fails after RCM boot: "Device ping failed after RCM boot"](https://community.stereolabs.com/t/zed-box-orin-nx-16gb-jetpack-7-2-flash-fails-after-rcm-boot-device-ping-failed-after-rcm-boot/11678)

<div class="topic-metadata">

**Author:** [@ccastellanos-code](https://community.stereolabs.com/u/ccastellanos-code)\
**Replies:** 7\
**Last updated:** [September 17, 2026, 1:25pm UTC](https://community.stereolabs.com/t/zed-box-orin-nx-16gb-jetpack-7-2-flash-fails-after-rcm-boot-device-ping-failed-after-rcm-boot/11678 "2026-09-17T13:25:20Z")

</div>

Hi, We are trying to upgrade/reflash a ZED Box Orin NX 16GB to JetPack 7.2 using the current official Stereolabs flashing procedure. We have already followed the Stereolabs documentation and troubleshooting recommendat…

---

## [Motion tracking using additional Azimuth and Elevation motors](https://community.stereolabs.com/t/motion-tracking-using-additional-azimuth-and-elevation-motors/11725)

<div class="topic-metadata">

**Author:** [@antrossall](https://community.stereolabs.com/u/antrossall)\
**Replies:** 1\
**Last updated:** [September 16, 2026, 1:59pm UTC](https://community.stereolabs.com/t/motion-tracking-using-additional-azimuth-and-elevation-motors/11725 "2026-09-16T13:59:01Z")

</div>

Hi, I’m currently working on a project to track objects, namely drones, at close range for training purposes. We want to use the ZED X 4mm due to its global shutter and greater ranging but that comes with the downside of…

---

## [ZED 2i camera (SDK 5.4.1) regularly disconnects](https://community.stereolabs.com/t/zed-2i-camera-sdk-5-4-1-regularly-disconnects/11706)

<div class="topic-metadata">

**Author:** [@aschreiberuiuc](https://community.stereolabs.com/u/aschreiberuiuc)\
**Replies:** 2\
**Last updated:** [September 10, 2026, 5:49pm UTC](https://community.stereolabs.com/t/zed-2i-camera-sdk-5-4-1-regularly-disconnects/11706 "2026-09-10T17:49:04Z")

</div>

Hi, I have a ZED 2i camera that I’m using with an NVIDIA Jetson Thor. It is connected via USB. I am using ZED SDK 5.4.1. After about 1-5 minutes of streaming video (720p, with the issue occurring at 15 FPS and 30 FPS), …

[Next page](https://community.stereolabs.com/c/hw/5.md?page=1)
